# Using relative coordinates in TikZ to draw joined curves

I want to draw the following diagram in TikZ:

Currently I use the following code to do this:

\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{snakes,arrows,shapes}

\begin{document}

\begin{tikzpicture}[>=latex',node distance = 2cm]
\node (S1) {$S_1$};
\node [left of = S1] (S2) {$S_2$};
\node [above of = S2,node distance=1.04cm] (A) {$A$};
\node [above of = S1,node distance=1.04cm] (B) {$B$};

\node [below of = S2,node distance=1.04cm] (C) {$C$};
\node [below of = S1,node distance=1.04cm] (D) {$D$};

\draw [->,thick] (S1) to[bend left=40] node {} (S2);
\draw [->,thick] (S2) to[bend left=40] node {} (S1);

\draw [->,thick] (A) to[bend right=40] node {} (B);
\draw [->,thick] (D) to[bend right=40] node {} (C);

\end{tikzpicture}

\end{document}


However you will notice that I am using an absolute distance (1.04cm) to make sure that the curves intersect at the mid points. If I change the node distance, the absolute distance must be manually adjusted each time by trial and error. Is there anyway to draw such a diagram using TikZ without using the absolute distance so that when I change the node distance the curves adjust automatically?

-

You may try out following approach. Despite it also uses some magic constants, but having worked them out once (well, I did it for you :)), you don't need to alter them anymore. \coeffx and \coeffy are already gracefully set for you, it is left to adjust \nodedistancex and \nodedistancey as you wish.

\documentclass{minimal}

\usepackage{tikz}
\usetikzlibrary{arrows,positioning}

\def \coeffx{0.29}
\def \coeffy{0.91}
\def \nodedistancex{4cm}
\def \nodedistancey{1cm}
\def \offsetx{\nodedistancex*\coeffx}
\def \offsety{\nodedistancey*\coeffy}

\begin{document}

\begin{tikzpicture}[>=latex', node distance=\nodedistancey and \nodedistancex]
\node (S1) {$S_1$};
\node[left=of S1] (S2) {$S_2$};
\node[above=of S2] (A) {$A$};
\node[above=of S1] (B) {$B$};
\node[below=of S2] (C) {$C$};
\node[below=of S1] (D) {$D$};

\draw[->,thick] (S1) .. controls +(-\offsetx,\offsety) and +(\offsetx,\offsety) .. (S2);
\draw[->,thick] (S2) .. controls +(\offsetx,-\offsety) and +(-\offsetx,-\offsety) .. (S1);
\draw[->,thick] (A) .. controls +(\offsetx,-\offsety) and +(-\offsetx,-\offsety) .. (B);
\draw[->,thick] (D) .. controls +(-\offsetx,\offsety) and +(\offsetx,\offsety) .. (C);
\end{tikzpicture}

\end{document}


-

One solution is as follows. On purpose, I added rows to the diagram, so that you can see one of the benefits of the loops. The output is

The code is (I hope it is self-explanatory) :

\documentclass{minimal}

\usepackage{tikz}
\usetikzlibrary{matrix}
\usetikzlibrary{calc}

\begin{document}

\begin{tikzpicture}[>=latex']

\pgfmathsetmacro{\rows}{5}

\matrix[matrix of math nodes,column sep=2cm,row sep = 1cm] (m) {
A&B\\
S_2&S_1\\
C&D\\
S_4&S_3\\
E&F\\
};

\foreach \k in {1,...,\rows}{
\coordinate (c\k) at ($(m-\k-1)!0.5!(m-\k-2)$);
}

\foreach \k [count=\kprev] in {2,...,\rows}{

\ifodd \k
\tikzset{dir/.style={<-}}
\else
\tikzset{dir/.style={->}}
\fi

\coordinate (c) at ($(c\kprev)!0.5!(c\k)$);
\draw[dir] (m-\kprev-1) to[out=-45,in=180] (c) to[out=0,in=225] (m-\kprev-2);
\draw[dir] (m-\k-1) to[out=45,in=180] (c) to[out=0,in=135] (m-\k-2);
}

\end{tikzpicture}

\end{document}


Edit : fixed the code to correct for the arrows

-
Nice solution, Frederic! – Dmitry Volosnykh May 5 '11 at 3:32
I like this one. The point is that you know that you want the curves to intersect and you know where those intersections should be - indeed, it's easier for you to see that than it is for the computer! So you tell the computer exactly where to put the curves. – Loop Space May 5 '11 at 6:59

you can add a dot in the middle of the path between A and S1 then draw the two arcs by that point

\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{snakes,arrows,shapes}

\begin{document}

\begin{tikzpicture}[>=latex',node distance = 2cm]
\node (S1) {$S_1$};
\node [left of = S1] (S2) {$S_2$};
\node [above of = S2,node distance=1.5cm] (A) {$A$};
\node [above of = S1,node distance=1.5cm] (B) {$B$};

\node [below of = S2,node distance=1.3cm] (C) {$C$};
\node [below of = S1,node distance=1.3cm] (D) {$D$};

\path(A) -- (S1)coordinate[pos=0.5](inter1);
\path(C) -- (S1)coordinate[pos=0.5](inter2);
\draw [->,thick] (S1) to[out=135,in=0] (inter1) to [out=180,in=45] (S2);
\draw [->,thick] (S2) to[out=-45,in=180] (inter2) to [out=0,in=-135] (S1);
\draw [->,thick] (A) to[out=-45,in=180] (inter1) to [out=0,in=-135]  (B);
\draw [->,thick] (D)  to[out=135,in=0] (inter2) to [out=180,in=45] (C);

\end{tikzpicture}

\end{document}


-