Take the 2-minute tour ×
TeX - LaTeX Stack Exchange is a question and answer site for users of TeX, LaTeX, ConTeXt, and related typesetting systems. It's 100% free, no registration required.

This question is a follow up of my previous question Hide section in table of contents but show it in pdfbookmark.

When I compile my code in XeLaTeX it comes out perfectly in TeXworks. With only one set of pdfbookmarks. See the right hand part of the picture below.

When I open that file in Preview or Adobe Reader, there is suddenly an extra set of bookmarks which is from the \section{} commands in my code. See the left hand side of the picture.

Preview and TeXworks side by side

When I remove the \section{} commands and play around with \setcounter{section}{0} my \firsttitlemarks\thesubsection header gets messed up. The 1:1-2:4 turns into 1:2-2:4 etc.

Any ideas on how to remove these extra bookmarks without breaking my header's marks?

\documentclass[paper=a5,pagesize=pdftex]{scrbook}
\usepackage[top=2cm,bottom=1.5cm, left=1.5cm, right=1.5cm]{geometry}
\usepackage[pagestyles]{titlesec}
\usepackage{lettrine}
\usepackage{xltxtra}
\usepackage{tocloft}
\usepackage{etoolbox}
\usepackage[toc]{multitoc}
\usepackage{setspace}

\renewcommand{\thesection}{\arabic{section}}
\renewcommand{\thesubsection}{\arabic{subsection}}

\newcommand\Text{And every plant of the field before it was in the earth, and every herb of the field before it grew: for the LORD God had not caused it to rain upon the earth, and there was not a man to till the ground.}

\setcounter{tocdepth}{0}

\defaultfontfeatures{Mapping=tex-text}
\setmainfont{Cardo}

% definition of the page style with required headers
\newpagestyle{Biblestyle}{
  \setheadrule{.02pt}
  \sethead[\thepage][\chaptertitle][\firsttitlemarks\thesection:\ifthesubsection{\firsttitlemarks\thesubsection}{1}---\bottitlemarks\thesection:\bottitlemarks\thesubsection]{\firsttitlemarks\thesection:\ifthesubsection{\firsttitlemarks\thesubsection}{1}---\bottitlemarks\thesection:\bottitlemarks\thesubsection}{\chaptertitle}{\thepage}
}

% sets the marks to be used (section and subsection)
\setmarks{section}{subsection}

% sections and subsections formatting
\titleformat{\section}{}{\lettrine{\thesection}}{0em}{}[\vskip-1\baselineskip]
\titleformat{\subsection}[runin]
{\small\bfseries}{\thesubsection}{1em}{}
\titlespacing{\section}{1em}{-1pt}{0pt}
\titlespacing{\subsection}{0pt}{0pt}{1em}

\setlength{\parindent}{0pt}

\newlength\NumLen
\newlength\LinLen
% indents one line of text. Indentation= width of section number + 1em
\newcommand\IndOne{%
  \settowidth\NumLen{\thesection}
  \addtolength\NumLen{1em}
  \setlength\LinLen{\dimexpr\textwidth-\NumLen}%\the\NumLen\the\LinLen
  \parshape 2 \NumLen \LinLen 0pt \textwidth}
% indents two lines of text. Indentation= width of section number + 1em
\newcommand\IndTwo{%
  \settowidth\NumLen{\thesection}
  \addtolength\NumLen{1em}
  \setlength\LinLen{\dimexpr\textwidth-\NumLen}%\the\NumLen\the\LinLen
  \parshape 3 \NumLen \LinLen \NumLen \LinLen 0pt \textwidth}

\usepackage[none]{hyphenat}
\sloppy
\usepackage{hyperref}
\hypersetup{
    bookmarksdepth=1,
    unicode=true,
    colorlinks=true,
    citecolor={black},
    linkcolor={black},
    urlcolor={black},
    pdffitwindow=true,
}

\addtokomafont{disposition}{\rmfamily\mdseries}

\renewcommand{\contentsname}{Table of Contents}
\renewcommand*\cfttoctitlefont{\huge\hfill}
\renewcommand*\cftaftertoctitle{\hfill}
\renewcommand{\cftchapdotsep}{\cftdot}
\renewcommand{\cftpartfont}{\hfill\bfseries}
\renewcommand{\cftchapfont}{\mdseries}
\renewcommand{\cftpartpagefont}{\hfill\footnotesize\bfseries}
\renewcommand{\cftchappagefont}{\mdseries}
\setlength{\cftbeforetoctitleskip}{-4em}
\setlength{\cftaftertoctitleskip}{3em}
\setlength{\cftbeforechapskip}{.3em}
\setlength{\cftbeforepartskip}{.3em}
\setlength{\columnsep}{2pc}
\setlength\columnseprule{.4pt}

\begin{document}
\frontmatter
    % Titlepage
        \pdfbookmark[0]{Titlepage}{title}
    \title{}
    \subject{
        \vspace{3cm}
        \textbf{\Large{THE}\\\vspace{-0.3cm}
        \Huge{HOLY}\\\vspace{0.05cm}
        \Huge{BIBLE}}\\\vspace{0.5cm}
    \author{} \date{}
    }
    \maketitle

\cleardoublepage
\pdfbookmark[0]{\contentsname}{tofcontents}
\begin{spacing}{0.01}
\tableofcontents
\end{spacing}
\cleardoublepage

\mainmatter
\pagestyle{Biblestyle}
\newlength{\myIndent}
\begin{center}
\phantomsection
\addcontentsline{toc}{part}{Old Testament}\noindent
\phantomsection
\addcontentsline{toc}{chapter}{Genesis}\noindent
THE FIRST BOOK OF MOSES, CALLED\\
\vspace{0.15cm}\textbf{\Huge{GENESIS}}\vspace{0.00cm}\\

\end{center}
\renewcommand{\chaptertitle}{Genesis}
\setcounter{section}{0}
\pdfbookmark[1]{1}{01O1}
\section{}\settowidth{\myIndent}
{\IndOne \Text}
\ifdimless{\the\myIndent}
{.99\textwidth}
{\IndOne \Text \stepcounter{subsection} \subsection{} \IndOne \Text}
{\IndTwo \Text \stepcounter{subsection} \subsection{} \Text}
\subsection{} \Text
\subsection{} \Text
\subsection{} \Text
\subsection{} \Text
\subsection{} \Text

\pdfbookmark[1]{2}{01O2}
\section{}\settowidth{\myIndent}
{\IndOne \Text}
\ifdimless{\the\myIndent}
{.99\textwidth}
{\IndOne \Text \stepcounter{subsection} \subsection{} \IndOne \Text}
{\IndTwo \Text \stepcounter{subsection} \subsection{} \Text}
\subsection{} \Text
\subsection{} \Text
\subsection{} \Text
\subsection{} \Text
\subsection{} \Text

\begin{center}
\cleardoublepage
\phantomsection
\addcontentsline{toc}{chapter}{Exodus}\noindent
THE SECOND BOOK OF MOSES, CALLED\\
\vspace{0.15cm}\textbf{\Huge{EXODUS}}\vspace{0.00cm}\\
\end{center}
\renewcommand{\chaptertitle}{Exodus}
\setcounter{section}{0}
\pdfbookmark[1]{1}{02O1}
\section{}\settowidth{\myIndent}
{\IndOne \Text}
\ifdimless{\the\myIndent}
{.99\textwidth}
{\IndOne \Text \stepcounter{subsection} \subsection{} \IndOne \Text}
{\IndTwo \Text \stepcounter{subsection} \subsection{} \Text}
\subsection{} \Text
\subsection{} \Text
\subsection{} \Text
\subsection{} \Text
\subsection{} \Text
\end{document}
share|improve this question
1  
Please try to reduce your code to a minimal working example, emphasis on minimal. –  frabjous Sep 1 '11 at 13:54
add comment

2 Answers

up vote 4 down vote accepted

Use the following code after hyperref:

\makeatletter
\def\toclevel@section{2} 
\makeatother

Normally \toclevel@section has the number 1. The number of the

\tocleve@<structure element>

is used by bookmarksdepth. So the level for every section is changed in the bookmark. Now section is on the same level as subsection.

share|improve this answer
    
Thanks. I've found another solution which I'll post tomorrow as the site won't allow me to answer my own question right now. But your solution is a bit cleaner to implement and seems to work. –  McGafter Sep 1 '11 at 14:09
add comment

Adding

\addtocounter{chapter}{1}

to and removing the custom bookmark

\pdfbookmark[1]{1}{02O1}

from every chapter or Bible book name after the first solved it.

\addtocounter{chapter}{1}
\renewcommand{\chaptertitle}{Exodus}
\setcounter{section}{0}
%\pdfbookmark[1]{1}{02O1}
share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.