Take the 2-minute tour ×
TeX - LaTeX Stack Exchange is a question and answer site for users of TeX, LaTeX, ConTeXt, and related typesetting systems. It's 100% free, no registration required.
  ----------            
    TABLE           ------------          
  | a |  b |           FIGURE 1           
  | c |  d |                              
  | e |  f |                              
  | g |  h |                              
  | i |  j |        -------------         
  | l |  m |       Figure 1: subCaption
  ----------
  Table 1: subCap       ------------
                        FIGURE 2
  ----------                
    TABLE                                  
  | a |  b |                                               
  | c |  d |         -------------
  | e |  f |        Figure 2: subCaption
  | g |  h |  
  | i |  j |              ------------
  | l |  m |                FIGURE 3
  ----------                 
  Table 2: subCap      

TABLES : Global Caption  -------------
                        Figure 3: subCaption

                      FIGURES: Global Caption

I'm trying to achieve the layout above. Here we have a minimal example with 4 images and 2 tables separated. I wasn't able to mix these two types.

\documentclass[12pt, a4paper]{article}

\usepackage{graphicx}
\usepackage[lofdepth,lotdepth]{subfig}
\usepackage{calc}
\usepackage{array}
\usepackage{multirow}
\usepackage[table]{xcolor}
\usepackage{lipsum}

\definecolor{color1}{RGB}{255,255,255}
\definecolor{color2}{RGB}{250,245,250}


\begin{document}

% paper margins and stuff of the university dissertation template
\setlength{\topmargin}{0mm}
\setlength{\textheight}{\paperheight-\headheight-\headsep-\footskip-2in}
\setlength{\oddsidemargin}{0mm}
\setlength{\evensidemargin}{0mm}
\setlength{\marginparwidth}{0mm}
\setlength{\marginparsep}{0mm}
\setlength{\textwidth}{\paperwidth-2in}

\listoftables
\listoffigures

\section{Example with tables and figures}

\begin{table}
\centering 
\scriptsize
\setlength{\extrarowheight}{3.0pt} 
\rowcolors{1}{color2}{color1}
\subfloat[Table 1 list of algorithms results][Big Table 1 caption]{
\begin{tabular}{m{2.0cm}cccc} 
\multicolumn{5}{c}{\textbf{ALGORITHMS TYPE 1}} \\
\hline
\textbf{ALGORITHMS}  & \textbf{Test1} & \textbf{Test2} & \textbf{Test3} & \textbf{Test4} \\
\multirow{1}{2.0cm}{ALGO 1} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 2} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 3} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 4} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 5} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 6} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 7} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 8} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 9} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 10} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\hline
\end{tabular}
\label{tab:results1}}
\rowcolors{1}{color2}{color1}
\subfloat[Table 2 list of algorithms results][Big Table 2 caption]{
\begin{tabular}{m{2.0cm}cccc} 
\multicolumn{5}{c}{\textbf{ALGORITHMS TYPE 2}} \\
\hline
\textbf{ALGORITHMS}  & \textbf{Test1} & \textbf{Test2} & \textbf{Test3} & \textbf{Test4} \\
\multirow{1}{2.0cm}{ALGO 1} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 2} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 3} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 4} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 5} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 6} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 7} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 8} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 9} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\multirow{1}{2.0cm}{ALGO 10} & 0.0000 & 0.0000 & 0.0000 & 0.0000 \\
& (0.0000) & (0.0000) & (0.0000) & (0.0000) \\
\hline
\end{tabular}
\label{tab:results2}}
\caption{Results for two types of algorithms} 
\label{tab:results} 
\end{table}

\begin{figure}[!h]
\centering
\subfloat[Subfigure 1 list of figures text][Subfigure 1 caption]{
\includegraphics[width=0.4\linewidth]{./figure1.pdf}
\label{fig:subfig1}}
\subfloat[Subfigure 2 list of figures text][Subfigure 2 caption]{
\includegraphics[width=0.4\linewidth]{./figure1.pdf}
\label{fig:subfig2}}
\qquad
\subfloat[Subfigure 3 list of figures text][Subfigure 3 caption]{
\includegraphics[width=0.4\linewidth]{./figure1.pdf}
\label{fig:subfig3}}
\subfloat[Subfigure 4 list of figures text][Subfigure 4 caption]{
\includegraphics[width=0.4\linewidth]{./figure1.pdf}
\label{fig:subfig4}}
\caption{This is a figure containing several subfigures.}
\label{fig:allfigs}
\end{figure}

Subfigures of figure \ref{fig:allfigs} as \ref{fig:subfig1}, \ref{fig:subfig2}, \ref{fig:subfig3} and \ref{fig:subfig4} and to the sub-index as \subref{fig:subfig1}, \subref{fig:subfig2}, \subref{fig:subfig3} and \subref{fig:subfig4}.

Subtables of table \ref{tab:results} as \ref{tab:results1} and \ref{tab:results2} and to the sub-index as \subref{tab:results1} and \subref{tab:results2}.

\end{document}
share|improve this question
1  
Perhaps use a minipage for each side? –  Peter Grill Mar 9 '12 at 16:20

1 Answer 1

up vote 4 down vote accepted

Heres an example of a possible solution using minipages; the captions were provided using the \captionof and \caption* commands from the caption package:

\documentclass{article}
\usepackage[demo]{graphicx}
\usepackage{caption}
\usepackage{booktabs}

\begin{document}

\begin{center}
\begin{minipage}{.5\textwidth}
  \centering
  \begin{tabular}{ll}
    \toprule
    column1a & column2a \\
    column1b & column2b \\
    column1c & column2c \\
    column1d & column2d \\
    column1e & column2e \\
    \bottomrule
  \end{tabular}
  \captionof{table}{test table 1}
  \label{tab:test1}
  \begin{tabular}{ll}
    \toprule
    column1a & column2a \\
    column1b & column2b \\
    column1c & column2c \\
    column1d & column2d \\
    column1e & column2e \\
    \bottomrule
  \end{tabular}
  \captionof{table}{test table 2}
  \label{tab:test2}
  \caption*{\tablename s:~The general caption}
\end{minipage}%
\begin{minipage}{.5\textwidth}
  \centering
  \includegraphics{name1}
  \captionof{figure}{test figure 1}
  \label{fig:test1}
  \includegraphics{name2}
  \captionof{figure}{test figure 2}
  \label{fig:test2}
  \includegraphics{name3}
  \captionof{figure}{test figure 3}
  \label{fig:test3}
  \caption*{\figurename s:~The general caption}
\end{minipage}%
\end{center}

\end{document}

enter image description here

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.