Take the 2-minute tour ×
TeX - LaTeX Stack Exchange is a question and answer site for users of TeX, LaTeX, ConTeXt, and related typesetting systems. It's 100% free, no registration required.

The golden fleece of book design has been the typesetting of the typed area in relation to the paper and the spread. Famous typographers such as Jan_Tschichold and Rosarivo devised canon's of page construction detailing how to calculate margins and set the typed area. They produced diagrams such as the one shown below:

enter image description here

Trusted and respected class authors such as Peter Wilson (memoir) and Markus Kohm (KOMA-Script) exhorted authors to follow these rules, sometimes very strongly, in a language reminiscent of construction specifications. Markus Kohm writes,

In a double-sided document (e. g. a book) however, the complete inner margin (the margin at the spine) should be the same as each of the two outer margins; in other words, a single page contributes only half of the inner margin...

Some classes such as the octavo are dedicated to achieving the classical page ratios.

Having looked at over 100 books as part of some development work I am trying to complete, the most immediate and apparent observation is that most Publishers and obviously their book designers currently disregard such rules. My own feeling is that this is mostly done for monetary reasons. The books in my opinion still look very good and maybe is time to let medieval rules fall away.

Here, is my question and I know it will not have any specific answer. What margin proportions and typed area settings do you think make a good modern book. Can you provide statistics from some books you like (paper size, top margin, bottom margin, left margin and right margin). All margins defined absolutely as per the geometry package or you can use LaTeX terminology.

enter image description here

Obviously, if a book has marginalia it is a whole different kettle of fish. So I would like if possible to limit the answers to books that do not contain margin material.

share|improve this question
7  
I think a very cool research project would be to analyze PDFs found on the web automatically for these proportions. This would, of course, include many poor layouts but it would provide a sense for what people do. –  Christian Lindig May 12 '12 at 9:40
5  
I don't think there's an alternative to the basic rule "outer margin = sum of inner margins". I just opened a random number of books and it is true for each and every one of them. Note however that this is a "visual" rule: A book is almost never opened completely, so the inner margins have to be slightly larger to compensate for this. –  Stephan Lehmke May 12 '12 at 12:07
10  
Of course, the author/typographer doesn't always know whether the book has marginalia or not -- the reader might add some. Imagine Fermat's frustration with modern narrow margins! –  Brent.Longborough May 12 '12 at 14:19
2  
@Brent.Longborough I have used the term loosely to refer to margin notes and margin figures. But you got a point there. Personally I always enjoy buying used books with lots of hand-written annotations. –  Yiannis Lazarides May 12 '12 at 14:43
2  
Is this really a *TeX question? –  Canageek May 13 '12 at 23:32

4 Answers 4

Just to add a bit more background and to attempt to answer my own question, while waiting for other answers.

First we need to understand what we mean by the "classical method" and "canons of page construction" and rules. Since the only tools that were available at the time the first printers operated, were only compasses and rulers, and mathematics revolved mainly around geometry a page was probably laid out using only a ruler and perhaps a square. The easiest to draw and possibly the first to be explicitly used for books is the Van de Graaf method. Since we are a bit luckier that our predecessors we will draw the pages using TikZ.

enter image description here

The first lines that were drawn were the diagonals. When the red lines were then drawn, one could determine the edges of the print area, thus dividing the book proportionally with margins of 1:2 both at the sides as well as top and bottom. If the paper had proportions of 2:3 such as a 6 inch x 9 inch page, the text height equals the paper width. This is not apparent when you look at the diagram above, but if you check the one below with the circle it is much clearer.

enter image description here

As you will notice the page has a grid of 9 x 9. Many famous typographers such as Tschichold and Rosarivo came to the same conclusions as Van de Graaf and proclaimed this type of layout as the best in terms of typography. The amazing thing, in my opinion in that out of all these geometric lines that remind me of those secretive symbols reminiscent of those found on a dollar bill, some amazingly beautiful books were born.

Another interesting artifact of the method is that if you add a "binding correction", as the authors of the KOMA-script call it, the method can still produce the same proportions.

enter image description here

As far as LaTeX based designs, the closest to a perfect layout can be produced using the octavo class, which uses paper dimensions such as Royal and Octavo, which have the right proportions.

For non-classical size papers, there are difficulties in achieving the proportions, especially the textheight=paperwidth relationship. In this case -- as far as I know -- the KOMA classes are the only ones that allow you to subdivide the page in a grid using BCOR. The tendency is to use a higher number of gridlines (12) and get the margins a bit smaller.

Here, is how an A4 page looks with a 12 grid and is very close to the ideal proportions. You can observe only the circle is a bit out.

enter image description here

These books in my opinion still look very professional and are easy on the eye when reading. The image below is from a recent reprint in Russian of Tschichold's Elements of Typography.

enter image description here

And now as to the functionality of the margins, which as per the comments and discussion their functionality is mainly to allow for one to hold the book (medieval people must have had big fingers) and perhaps to avoid smudging ink, if the ink quality was not that good. Even with electronic devices one needs a bit of a margin!

enter image description here

Now most of us in our documents use margin notes and perhaps margin figures and this complicates matters terribly. We also have to deal with the LaTeX terminology, which in some places is a bit lacking in semantics, as for example \topmargin is not really the top margin as everyone would understand it, but merely a "top correction factor" that is in most cases used to cancel out some of the effects of Knuth having added that one inch.

enter image description here

(This part is to be continued once I have this poor man's TikZ code fully debugged. Note all diagrams have been produced using TikZ).

In the meantime one can ponder at what Bernard Shaw had to say about margins:

Every printer can understand regularity: few have studied good looks except in living creatures. Consequently they aim at equal margins; and even when they have learnt that an upper margin must be less than a lower one if it is not to look more, they do not always see that it looks well only when it looks less. The mediaeval manuscript or early printed book, with its very narrow margin at the top and very broad margin at the bottom of the page, with its outer margins broad and its inner ones contracted, so that when the book lies open the two pages seem to make but a single block of letterpress in a single frame, instead of two side by side, has never been improved upon and probably never will be. But I find it almost impossible to persuade a modern printer to make his top margin small enough; and when I at last succeed, he measures it from the running title instead of from the top line of the page.

I saw a book the other day, excellently printed in old faced type, set solid, on a fine light, clean white crusty paper; yet the page was quite spoiled by an exaggerated top margin,like a masher's collar, and by that abomination of desolation, a rule. The only thing that never looks right is a rule. There is not in existence a page with a rule on it that cannot be instantly and obviously improved by taking the rule out.

Of course like in Bernard Shaw's days books vary and tastes vary, especially in coffee table type of books where imagery predominates. Here the designer tends to lay the page elements in a grid, and then break it!.

enter image description here

In general though most designers would adhere to the rule that the top margin is smaller than the bottom margin or set them equal. Some designs still offer something from the ideas of the classical method.

enter image description here

But then break the rules down the line.

enter image description here

The Hackers point of view.

My interest in all these is from a hacker's point of view. What I am aiming is to collect statistics and perhaps group designs to ease self-publishing by reverse engineering the designs. If this is achieved one can alter some of the standard or generic classes algorithms that determine page layout. So far the most generic layout that fits the majority of books (including paperbacks) is to divide the page into a grid of twelve and follow the classic method with a constraint that none of the margins should be less than 12.5mm plus a small allowance for binding correction that depends on the number of pages.

If one wishes to self publish in one of the numerous services such as Lulu -- whose majority of books are in need of some good typography -- one should add to the algorithm selection of paper size based on number of words in the publication.

The overall design should be viewed in a grid (which I know is difficult to achieve with TeX), but at least major elements such as Chapter headings should be positioned on the grid. In this respect I will come back and post links to code that hopefully improves on the layouts and geometry packages ability to illustrate the page dimensions.

share|improve this answer
    
What's the source on the last image in this post with all of the annotated sizes? That's a really wonderful image! –  EricR May 15 '12 at 19:06
    
@EricR It is from some code I wrote. It still needs some polishing. –  Yiannis Lazarides May 15 '12 at 19:25
4  
+1 for what is going to become an excellent introduction into the classics of page layout. Very nice, Yiannis! –  Daniel May 16 '12 at 9:01
3  
A nice display of some page layouts. My A Few Notes on Book Design (try texdoc memdesign) includes over 30 layout diagrams from a wide range of books. –  Peter Wilson May 19 '12 at 9:13
2  
Could you put up the code for the TikZ images on texample.net as these would be greatly instructive (when they are ploished as you say). I agree with @EricR they are wonderful images. –  Leeser May 19 '12 at 9:19

In the interests of broadening the range of layouts one might consider, let me submit the opening of Gratian's Decretum (edition here: Mainz 1472):

opening distinction of Gratian's _Decretum_

Much like the Bible, legal texts consisted of two parts: the main text, and a sort of commentary (eventually it coalesces as the "Ordinary Gloss") surrounding the text proper. This one is lavishly decorated, obviously. The Bayerische Staatsbibliothek has an amazing number of early printed books digitized and available for download; you can access the collection directly here. As a point of comparison, consider this snippet from a thirteenth-century manuscript copy (St Gall 673) of the same text (though in a different 'edition' of the text):

St Gall 673

No less lavish a text, but so early that it lacks all but a very few glosses (though space was deliberately left for them).

Also, as far as I understand it, posting these images here falls under 'fair use', but I will take them down if I need to.

share|improve this answer
1  
Did you mean the “Digitale Sammlungen” (digital collections/libraries)? Then there’s an own domain: digitale-sammlungen.de (switch to English on lower left side, but parts seem only to be available in German). –  Speravir May 17 '12 at 20:36

My opinion is that there is a huge amount of variation among well-designed books. It just depends on your audience, the size of your book, your style, and how much design means to you. Your best bet is to choose a book that is like yours (size, quality, market, type) and whose design you like, and copy it!

Allegedly Picasso said, "Lesser artists borrow, great artists steal." So go out and steal a design you like. De gustibus no disputandum.

share|improve this answer
1  
You mean 'non disputandum'. But I agree: and add the purpose/genre of the book (or 'function' of the book) should be one of the most important factors in determining the layout. The layout of (say) a modern dictionary and that of an early modern printing of the Bible with the Ordinary Gloss will not, and should not, be the same. –  jon May 15 '12 at 20:49
    
Correct is: 'De gustibus non est disputandum' –  Zonk Jul 25 '12 at 10:39

I have liked the idea of "Fibonacci" proportions, type, margin, gutter, spacing, etc.

But if it is to be a reference, I like wide outside margins, for adding my own notes.

I found an interesting PDF proportion lecture and page construction.

In the end it all ends being comfortable readability and understanding the meaning.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.