Take the 2-minute tour ×
TeX - LaTeX Stack Exchange is a question and answer site for users of TeX, LaTeX, ConTeXt, and related typesetting systems. It's 100% free, no registration required.

I am submitting a paper to a conference that has a limit of 10 pages. I have edited and edited the text, but the paper still fills 11 pages, and I am reluctant to remove anything. What tricks can I use to make the paper fit in 10 pages?

I know about \vspace{-1mm}, but are other and better tricks? How can I squeeze a little bit between lines, around the elements produced by \maketitle, around headlines, etc. in a way that is consistent and does not look too ugly? Is it possible to reduce the font size from 11 points to, say, 10.9?

(This should be community wiki, but I don't have enough rep yet.)

share|improve this question
You can always make you own questions CW. Edit the question and check the CW box. –  Loop Space Jul 30 '10 at 18:54
Do we have "don't-do-this" tag?.. –  Grigory M Jul 30 '10 at 18:59
Why should this be community wiki? –  Kevin Vermeer Jul 30 '10 at 19:44
Are you using a specific Latex class that is required by the conference (in which case you shouldn't use any such tricks...) or are you voluntarily using something like article (in which case there are several possibilities for saving some space, e.g., by using a more compact document style)? –  Jukka Suomela Jul 30 '10 at 19:49
@Seamus: For many conferences, your suggestion will lead to an automatic reject. –  Ben Mar 24 '11 at 8:14

16 Answers 16

Keep in mind that by doing this you will be doing one or more of the following: annoying the reviewers, making your paper less readable, shooting yourself in the foot. I've been know to play these tricks when I need to reduce it by a line or two, but 10% is pushing the limits. Its even worse if its a grant proposal. It may just be rejected out of hand, with no recourse. Part of being a good researcher is knowing how to write concisely, and knowing what can be left out.

share|improve this answer
+1! Editing the paper to make it more concise and clear (=better) is always preferable to editing the layout to make it smaller (=worse) –  Kevin Vermeer Jul 30 '10 at 19:49
Good point, I agree with you however this does not answer the question. –  sixtyfootersdude Oct 15 '10 at 9:34

Under the constraints that you should not change any of the specifications that the committee lays out, the following work well, and can save you upto a page or more in a 10-11 page document.

  • Use Times Roman (\usepackage{times}) (read the comments for why not)
  • Use a compact bibliography style like abbrv instead of the defaults
  • Preface the bibliography with a \small
  • Tables of results can often be typeset one size smaller without any visual impairment. In fact they often look better that way, because they stand out from the text in any case. Using \small as above does the trick.
  • As mentioned above, try to find and reword paragraphs that have dangling last lines with 2-3 words in them. This can make a bigger difference than you think.
  • Use the package wrapfig to wrap figures around text, rather than having them set off and wasting space around them. This is very effective for small illustrative figures - not such a good idea for figures of results though.
  • Conference style files (ACM, can you hear me?) often waste a lot of space around subheaders like \subsection and \subsubsection. Often, you can get around this by replacing organizational elements by \paragraph*. While this might kill the numbering, it is often reasonable, and saves a lot of space.

Update: Another trick I forgot to mention is using the microtype package. It's very effective at doing subtle shrinkage that undetectable to a non-font expert.

share|improve this answer
Do not \usepackage{times}. Read this. –  TH. Aug 28 '10 at 13:46
Prefacing the bibliography with \small breaks the style decided upon by the committee. It is very commonly used though. –  Ben Mar 24 '11 at 8:17
You should use TeX Gyre Termes via \usepackage[T1]{fontenc} \usepackage{tgtermes} instead of \usepackage{times} –  Canageek Nov 14 '11 at 22:29

Check out this page on Squeezing Space in LaTeX, it contains many useful tips ranging from using standard stuff like \linespread{0.9} to using packages that allow more customization like paralist or caption.

share|improve this answer
paralist is great ! –  Suresh Aug 3 '10 at 17:17

I generally don't like to fiddle with fonts, margin or spacing because it can look very ugly, many journals and conferences explicitly ask you not to do this, and it just feels kind of cheating.

Having said that, I do have a cheat which I usually apply when I need to squeeze a few extra lines in the paper (specially if I just have little time before the deadline): Go looking for paragraphs that end with a few words (maybe up to three or four) on its last line, and try to edit those paragraphs first. See if you can somehow reword things or cut some adjective here or there so that you can kill those maybe three words and get a whole extra line for your paper!

Some other more obvious tricks: if you have displayed formulas, consider if you can have them inlined with the text instead, and if you have figures consider scaling them down a bit.

share|improve this answer

For 'squeezing' material of any kind, the savetrees package is often a good place to start. It has a number of levels of squeezing, but even if you don't use the package you can pick up some tips from there. (I'm also agree with the other answers about worrying about the wisdom of looking for this much of a squeeze.)

share|improve this answer

Find a long paragraph with only 1 or 2 words on the last line, and say \looseness=-1 immediately after the last word of the paragraph, to ask tex to try to reset that paragraph a line shorter.

share|improve this answer

You might want to consider using a document class that is more space-efficient than article. I have fairly often used amsart – I think it looks reasonably good, and it doesn't waste as much space as article.

share|improve this answer
Changing the document class leads to automatic rejection for many conferences. –  Ben Mar 24 '11 at 8:18

I described several tools for this at my blog a few months ago.

Update: I have copied and pasted my post below.

Make your text block as big as possible. The simplest way to do that is using the geometry package:


Use a compact font such as Times Roman:


Remove the spacing between paragraphs and have a small paragraph indentation


Remove space around section headings.


Beware of enumerated and itemized lists. Instead, replace them with compact lists.

\item ...
\item ...

If you are allowed, switching to double column can save heaps of space.


If the rules say 12pt, you can usu ally get away with 11.5pt with out anyone noticing:


When you get desperate, you can squeeze the inter-line spacing using

share|improve this answer
Could you briefly describe a few of those tools/tricks here? It's fine to include a link to your website but, whenever possible, we want answers to be hosted in the site. See meta.tex.stackexchange.com/questions/227/… –  Juan A. Navarro Aug 3 '10 at 7:15

Sometimes I have managed to gain upto 5-6 lines by forcing TeX to break, a page at a point that it considers ugly. I do this by putting \goodbreak\noindent at the end of an existing line break in a paragraph that is close to a page boundary. Normally, this is enough to force a page break at that spot.

share|improve this answer
Huh, I don't think I've used \goodbreak before. Nice command to keep in mind. –  Will Robertson Nov 22 '10 at 4:44

In the article class, I think the output of \maketitle is both ugly and wastes too much space in a short document. If you don't want to use another document class, a simple solution is to design your own replacement of \maketitle.

If you don't want to worry about creating your own \maketitle macro, you can simply omit commands such as \title and \maketitle and hard-code the title by using, e.g., center environment, appropriate font selection commands, and \vspace.

share|improve this answer

I would 'concur' with a reply above but don't have the 'points' to do so-

I'd be wicked careful about this, especially when it comes to grant proposals- I've sat on more than one panel where a submission was returned to the author un-reviewed because of these shenanigans. I've also witnessed this with respect to a conference abstract even.

I realize this doesn't 'answer' the question, as is the goal / rewarded behavior here, but thought I'd just chime in on it none the less for those of you contemplating it.

share|improve this answer

Most papers start with


This is both boring and redundant (a paper should always start with an introduction). If your introduction does not contain any subsections, just skip the \section command.

share|improve this answer
This was the single most prudent suggestion. No compromise on formatting involved, no trickery, just plain unadulterated common sense :) –  Vaibhav Garg Feb 6 at 6:49

When I'm reviewing conference papers, I don't mind limited margin/font/spacing abuse to get the paper under the limit; my favorite is to make the font size in the references smaller, or eliminate blank lines from the references. However, such abuse which affects the readability of the paper in any meaningful way would earn an immediate rejection recommendation from me, and a 9% reduction (if you really do have a full page to go) really is quite a lot to expect from this.

And for the camera-ready copy, such tactics are totally unacceptable if they're noticeable at all.

Really, the only correct answer is "edit it more". Having been there numerous times, I am 100% sure you can edit the paper down another page.

Perhaps you could say which conference you are submitting to. If it's an ACM conference, I might be able to give more advice.

share|improve this answer
If it's an ACM conference, it basically doesn't matter, it'll look ugly no matter what and their provided class is terrible. =\ –  TH. Aug 28 '10 at 13:48

Is there a lot of math in your document? If you suspect that the blocks of displayed math are taking up too much space (and possibly interfering with natural column/page breaks), then you might want to try these tricks:

  • Reducing the font size of only the math environment block

  • Allowing breaks within the math environment block

To achieve this, you can define the following commands in the preamble:



and use them in your document like this:

\startcompact{small} % or footnotesize, scriptsize, etc.
E &= mc^2\\
a^2 + b^2 &= c^2

If you want to allow breaks for all displayed math blocks, you can just put \allowdisplaybreaks in the preamble on its own; then to prevent breaks across individual lines, simply use \\* instead of \\.

This approach works quite well for the IEEE templates. (I would even argue that the compiled document looks better.)

share|improve this answer

Back in the day, people only used passive voice in formal papers, but now active voice is becoming more acceptable. Find a few sentences where you wrote in passive voice and rewrite them in active voice (this usually improves readability too). Also remember to never use a long word when a short one will do. Also, try shrinking any images or graphs by around 10% (but don't do this if it makes them unclear).

share|improve this answer

You can reduce the base font size in the document class statement

\documentclass[10pt,other options]{article}

which will make everything smaller. Your choices for that base font size are limited, though; I think it may only allow 10pt, 11pt, and 12pt. There are also various packages to change font sizes; have a look at relsize and anyfontsize, for example.

Another option would be to reduce the margin size by using a package like vmargin.

share|improve this answer
I think most conferences specify font sizes too. –  ShreevatsaR Jul 30 '10 at 19:23
Even if the conference doesn't so specify, this likely wouldn't help the OP. The default size is 10pt, so changing from no specified base size to a specified one is either a non-op or going the wrong way. –  vanden Jul 30 '10 at 21:00
Changing fonts sizes and margins is usually severely frowned upon in my experience. –  Ben Jun 9 '11 at 16:06
In many conferences, guidelines include something like "papers with smaller page margins and font sizes than specified in the author instructions and set in the style files will also be treated as overlength". Take care if you decide to use this trick. –  Elenaher Apr 16 at 15:43

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.