Take the 2-minute tour ×
TeX - LaTeX Stack Exchange is a question and answer site for users of TeX, LaTeX, ConTeXt, and related typesetting systems. It's 100% free, no registration required.

I have just finished my thesis, and I want to ask if there is a way to create a front-title page with spine (I don't know if this is the right term for the area between front page and rear page)? I would also like to include a back page.

Some preliminary ideas are shown bellow

I found a package called zwpagelayout which allows somehow to create a spine and flaps as well. I tried to use it by

\documentclass[11pt]{book}
\usepackage[english,greek]{babel}
\usepackage[iso-8859-7]{inputenc}
\usepackage{kerkis}
\usepackage[pdftex]{graphicx}
\usepackage{colortbl}
\usepackage{xcolor}
\usepackage[papersize={,293mm}, topmargin=2mm, botmargin, strictheight, leftmargin=0mm, flap=50mm, textwidth=209mm, spine=13mm, cropmarks, cropframe, croptitle=Πρότυπο Εξωφύλλου]{zwpagelayout}
\linespread{1}

\begin{document}
 Εξώφυλλο
\end{document}

Using this code produces an error that spine is not defined... Any ideas?

I edited the previous code and the result is

Now I have to find a way to "move" around pages... Any ideas will over-welcomed!!!

I also used this

\documentclass[12pt,a4paper]{article}
\usepackage[T1]{fontenc}
\usepackage[latin1]{inputenc}
\usepackage{pstricks}
\pagestyle{empty}

\makeatletter
 \def\La{%
  L\kern-.36em{%
  \setbox0\hbox{T}%
  \vbox to\ht0{%
    \hbox{$\m@th$%
      \csname S@\f@size\endcsname
      \fontsize\sf@size\z@
      \math@fontsfalse\selectfont A}%
      \vss%
    }%
  }%
}
\def\AllTeX{(\La\kern-.075em)\kern-.075em\TeX}
\makeatother

\begin{document}
\begin{titlepage}
\psset{unit=1in,linewidth=2pt}%
\psline(-0.75,2)(-0.75,-\paperheight)%
\psline(-0.25,2)(-0.25,-\paperheight)%
\rput[lb]{90}(-0.3,-0.75\paperheight){\red\Huge\textbf{Study}}%
\rput[lb]{90}(-0.4,-0.1\paperheight){\red\Huge\textbf{MicroMEGAS}}%

\vspace*{3cm}
\centerline{\Huge \textbf{P}ost\textbf{S}cript \textbf{T}ricks}

\vspace{2cm}
\centerline{\Large Athanasios Stamatopoulos}
\end{titlepage}

\end{document}

but my compiler cannot recognise commands like the following

\psline(-0.75,2)(-0.75,-\paperheight)%

The output from this code is

As you see no spine is produced. Instead spine is inserted in frontpage...

I have found a way to move around pads... The complete and correct code is

\documentclass[11pt]{book}
\usepackage[english,greek]{babel}
\usepackage[iso-8859-7]{inputenc}
\usepackage{kerkis}
\usepackage[pdftex]{graphicx}
\usepackage{colortbl}
\usepackage{xcolor}
\usepackage[papersize={,293mm}, topmargin=2mm, botmargin, strictheight, leftmargin=0mm, flap=50mm, textwidth=209mm, spine=13mm, cropmarks, cropframe, croptitle=Πρότυπο Εξωφύλλου]{zwpagelayout}
\linespread{1}

\begin{document}
 \hbox to \textwidth{%
\vbox to \textheight{\hsize \CropFlap \centering
Back flap\vfill}\hss
\vbox to \textheight{\hsize \UserWidth \centering
\begin{tikzpicture}\draw (0,0) --(5,5);\end{tikzpicture}\vfill \leavevmode     ISBN+EAN}\hss
\vbox to \textheight{\hsize \CropSpine \centering
\vfill
\begin{sideways}Name Title\end{sideways}\vfill}\hss
\vbox to \textheight{\hsize \UserWidth \centering
Front cover\vfill \LaTeX}\hss
\vbox to \textheight{\hsize \CropFlap \centering
Front flap\vfill}}
\end{document}
share|improve this question
1  
It's kinda hard to propose you some "fancy" things without knowing anything about your thesis. Of course we could propose some generic things but those might look like the default designs provided by power point. In the end it is you who knows best, what could be on the title. We can only do the technical support or give advise how to optimize an already existing concept... –  Benedikt Bauer Oct 19 '12 at 7:02
    
You might want to look at these posts –  hpesoj626 Oct 19 '12 at 7:03
1  
I removed the generic title page part of your question because a) we only want one question per post here and b) you'll most likely find this question answer on tex.sx already, e.g. tex.stackexchange.com/questions/17579/…, and, as @BenediktBauer remarked, the question was really open. The way it is now, this is an interesting and good question. Hope that edit is ok with you. –  doncherry Oct 19 '12 at 7:37
1  
I believe the spine option should take a value like, say 8mm. Try [spine=8mm]. –  hpesoj626 Oct 19 '12 at 9:27
4  
If I hadn't upvoted already, I'd give you +1 for having the balls to post a mockup picture in Comic Sans on this site :D –  doncherry Oct 19 '12 at 14:40

1 Answer 1

up vote 10 down vote accepted

I have completed three covers. My code is

\documentclass{article}
\usepackage{pgfornament}
\usepackage[english,greek]{babel}
\usepackage[iso-8859-7]{inputenc}
\usepackage{kerkis}
\pagestyle{empty}
\usepackage{tikz}
\usetikzlibrary{decorations.fractals}
\usepackage[papersize={,297mm}, strictheight=false,topmargin=0mm, botmargin, flap=50mm, textwidth=209mm, spine=13mm, cropmarks, cropframe, croptitle=Εξώφυλλο Διπλωματικής]{zwpagelayout}
\usepackage{rotating}
\linespread{1}
\begin{document}
    \hbox to \textwidth{%
\vbox to \textheight{\hsize \CropFlap \centering \textcolor{white}{Front Flap}
}\hss
\vbox to \textheight{\hsize \UserWidth \vfill \leavevmode \textcolor{white}{ISBN+EAN}}\hss
\vbox to \textheight{\hsize \CropSpine \vfill
\begin{sideways}\hspace{-10cm}Αθανάσιος Ν. Σταματόπουλος \hspace{5cm}{\Large Μελέτη     Ανιχνευτή \latintext{MicroMEGAS}}  \end{sideways}\vfill}\hss
\vbox to \textheight{\hsize \UserWidth \vspace{1cm} 
\setlength{\unitlength}{1cm}
\begin{picture}(20,27)

\put(0.7,1){\pgfornament[width=1cm]{25}}
\put(1.7,1){\pgfornament[width=1cm]{25}}
\put(0.7,2){\pgfornament[width=1cm]{25}}
\put(1.7,2){\pgfornament[width=1cm]{25}}
\put(0.7,3){\pgfornament[width=1cm]{25}}
\put(1.7,3){\pgfornament[width=1cm]{25}}
\put(0.7,4){\pgfornament[width=1cm]{25}}
\put(1.7,4){\pgfornament[width=1cm]{25}}
\put(0.7,5){\pgfornament[width=1cm]{25}}
\put(1.7,5){\pgfornament[width=1cm]{25}}
\put(0.7,6){\pgfornament[width=1cm]{25}}
\put(1.7,6){\pgfornament[width=1cm]{25}}
\put(0.7,7){\pgfornament[width=1cm]{25}}
\put(1.7,7){\pgfornament[width=1cm]{25}}
\put(0.7,8){\pgfornament[width=1cm]{25}}
\put(1.7,8){\pgfornament[width=1cm]{25}}
\put(0.7,9){\pgfornament[width=1cm]{25}}
\put(1.7,9){\pgfornament[width=1cm]{25}}
\put(0.7,10){\pgfornament[width=1cm]{25}}
\put(1.7,10){\pgfornament[width=1cm]{25}}
\put(0.7,11){\pgfornament[width=1cm]{25}}
\put(1.7,11){\pgfornament[width=1cm]{25}}
\put(0.7,12){\pgfornament[width=1cm]{25}}
\put(1.7,12){\pgfornament[width=1cm]{25}}
\put(0.7,13){\pgfornament[width=1cm]{25}}
\put(1.7,13){\pgfornament[width=1cm]{25}}
\put(0.7,14){\pgfornament[width=1cm]{25}}
\put(1.7,14){\pgfornament[width=1cm]{25}}
\put(0.7,15){\pgfornament[width=1cm]{25}}
\put(1.7,15){\pgfornament[width=1cm]{25}}
\put(0.7,16){\pgfornament[width=1cm]{25}}
\put(1.7,16){\pgfornament[width=1cm]{25}}
\put(0.7,17){\pgfornament[width=1cm]{25}}
\put(1.7,17){\pgfornament[width=1cm]{25}}
\put(0.7,18){\pgfornament[width=1cm]{25}}
\put(1.7,18){\pgfornament[width=1cm]{25}}
\put(0.7,19){\pgfornament[width=1cm]{25}}
\put(1.7,19){\pgfornament[width=1cm]{25}}
\put(0.7,20){\pgfornament[width=1cm]{25}}
\put(1.7,20){\pgfornament[width=1cm]{25}}
\put(0.7,21){\pgfornament[width=1cm]{25}}
\put(1.7,21){\pgfornament[width=1cm]{25}}
\put(0.7,22){\pgfornament[width=1cm]{25}}
\put(1.7,22){\pgfornament[width=1cm]{25}}
\put(0.7,23){\pgfornament[width=1cm]{25}}
\put(1.7,23){\pgfornament[width=1cm]{25}}
\put(0.7,24){\pgfornament[width=1cm]{25}}
\put(1.7,24){\pgfornament[width=1cm]{25}}
\put(0.7,25){\pgfornament[width=1cm]{25}}
\put(1.7,25){\pgfornament[width=1cm]{25}}
\put(0.7,26){\pgfornament[width=1cm]{25}}
\put(1.7,26){\pgfornament[width=1cm]{25}}
%-----------------------------------------------------------
\put(3.4,23){\includegraphics[width=3.3cm]{ntua-logo}}
\put(7.1,25.4) {{\Large Εθνικό Μετσόβιο Πολυτεχνείο}}
\put(7.1,24.9) {{\Large Σχολή Εφαρμοσμένων Μαθηματικών\&Φυσικών Επιστημών}}
\put(7.1,24.4) {{\Large Τομέας Φυσικής}}
\put(7.1,23.9) {{\Large Εργαστήριο Πειραματικής Φυσικής Υψηλών Ενεργειών}}
\put(6,14){{\huge Μελέτη ανιχνευτή \latintext{MicroMEGAS}}}
\put(7.5,7.5){{\Large Σταματόπουλος Ν. Αθανάσιος}}
\put(9,1.5){{\Large Οκτώβριος 2012}}
\end{picture}}\hss
\vbox to \textheight{\hsize \CropFlap \textcolor{white}{Back Flap}
}}

\newpage

\hbox to \textwidth{%
\vbox to \textheight{\hsize \CropFlap \centering
\textcolor{white}{Back flap}\vfill}\hss
\vbox to \textheight{\hsize \UserWidth \vfill \leavevmode \textcolor{white}{ISBN+EAN}}\hss
\vbox to \textheight{\hsize \CropSpine \vfill
\begin{sideways}\hspace{-10cm}Αθανάσιος Ν. Σταματόπουλος \hspace{5cm}{\Large Μελέτη     Ανιχνευτή \latintext{MicroMEGAS}}  \end{sideways}\vfill}\hss
\vbox to \textheight{\hsize \UserWidth \vspace{1cm} 
\setlength{\unitlength}{1cm}
\begin{picture}(20,27)


\put(0.7,1){\pgfornament[width=1cm]{25}}
\put(1.7,1){\pgfornament[width=1cm]{25}}
\put(0.7,2){\pgfornament[width=1cm]{25}}
\put(1.7,2){\pgfornament[width=1cm]{25}}
\put(0.7,3){\pgfornament[width=1cm]{25}}
\put(1.7,3){\pgfornament[width=1cm]{25}}
\put(0.7,4){\pgfornament[width=1cm]{25}}
\put(1.7,4){\pgfornament[width=1cm]{25}}
\put(0.7,5){\pgfornament[width=1cm]{25}}
\put(1.7,5){\pgfornament[width=1cm]{25}}
\put(0.7,6){\pgfornament[width=1cm]{25}}
\put(1.7,6){\pgfornament[width=1cm]{25}}
\put(0.7,7){\pgfornament[width=1cm]{25}}
\put(1.7,7){\pgfornament[width=1cm]{25}}
\put(0.7,8){\pgfornament[width=1cm]{25}}
\put(1.7,8){\pgfornament[width=1cm]{25}}
\put(0.7,9){\pgfornament[width=1cm]{25}}
\put(1.7,9){\pgfornament[width=1cm]{25}}
\put(0.7,10){\pgfornament[width=1cm]{25}}
\put(1.7,10){\pgfornament[width=1cm]{25}}
\put(0.7,11){\pgfornament[width=1cm]{25}}
\put(1.7,11){\pgfornament[width=1cm]{25}}
\put(0.7,12){\pgfornament[width=1cm]{25}}
\put(1.7,12){\pgfornament[width=1cm]{25}}
\put(0.7,13){\pgfornament[width=1cm]{25}}
\put(1.7,13){\pgfornament[width=1cm]{25}}
\put(0.7,14){\pgfornament[width=1cm]{25}}
\put(1.7,14){\pgfornament[width=1cm]{25}}
\put(0.7,15){\pgfornament[width=1cm]{25}}
\put(1.7,15){\pgfornament[width=1cm]{25}}
\put(0.7,16){\pgfornament[width=1cm]{25}}
\put(1.7,16){\pgfornament[width=1cm]{25}}
\put(0.7,17){\pgfornament[width=1cm]{25}}
\put(1.7,17){\pgfornament[width=1cm]{25}}
\put(0.7,18){\pgfornament[width=1cm]{25}}
\put(1.7,18){\pgfornament[width=1cm]{25}}
\put(0.7,19){\pgfornament[width=1cm]{25}}
\put(1.7,19){\pgfornament[width=1cm]{25}}
\put(0.7,20){\pgfornament[width=1cm]{25}}
\put(1.7,20){\pgfornament[width=1cm]{25}}
\put(0.7,21){\pgfornament[width=1cm]{25}}
\put(1.7,21){\pgfornament[width=1cm]{25}}
\put(0.7,22){\pgfornament[width=1cm]{25}}
\put(1.7,22){\pgfornament[width=1cm]{25}}
\put(0.7,23){\pgfornament[width=1cm]{25}}
\put(1.7,23){\pgfornament[width=1cm]{25}}
\put(0.7,24){\pgfornament[width=1cm]{25}}
\put(1.7,24){\pgfornament[width=1cm]{25}}
\put(0.7,25){\pgfornament[width=1cm]{25}}
\put(1.7,25){\pgfornament[width=1cm]{25}}
\put(0.7,26){\pgfornament[width=1cm]{25}}
\put(1.7,26){\pgfornament[width=1cm]{25}}
%-----------------------------------------------------------
\put(9.5,23){\includegraphics[width=3.3cm]{ntua-logo}}
\put(8,22) {{\Large Εθνικό Μετσόβιο Πολυτεχνείο}}
\put(5,21.5) {{\Large Σχολή Εφαρμοσμένων Μαθηματικών\&Φυσικών Επιστημών}}
\put(9.5,21) {{\Large Τομέας Φυσικής}}
\put(5.5,20.5) {{\Large Εργαστήριο Πειραματικής Φυσικής Υψηλών Ενεργειών}}
\put(6,14){{\huge Μελέτη ανιχνευτή \latintext{MicroMEGAS}}}
\put(7.5,7.5){{\Large Σταματόπουλος Ν. Αθανάσιος}}
\put(9,1.5){{\Large Οκτώβριος 2012}}
\end{picture}}\hss
\vbox to \textheight{\hsize \CropFlap \centering
\textcolor{white}{Front flap}\vfill}}

\newpage

\hbox to \textwidth{%
\vbox to \textheight{\hsize \CropFlap 
\vspace{20.5cm} \begin{tikzpicture}\draw[color=gray!50,fill=gray!50] (0,0) rectangle     (5,-2);\end{tikzpicture}\vfill}\hss
\vbox to \textheight{\hsize \UserWidth \vspace{20.5cm}     \begin{tikzpicture}\draw[color=gray!50,fill=gray!50] (-2,0) rectangle     (30,-2);\end{tikzpicture}}\hss
\vbox to \textheight{\hsize \CropSpine \vfill
\begin{sideways}\hspace{-10cm}Αθανάσιος Ν. Σταματόπουλος  \hspace{5cm}{\Large Μελέτη     Ανιχνευτή \latintext{MicroMEGAS}}  \end{sideways}\vfill}\hss
\vbox to \textheight{\hsize \UserWidth \vspace{1cm} \line(1,0){40}{} \Large Σταματόπουλος     Ν. Αθανάσιος \line(1,0){320}\\ \setlength{\unitlength}{1cm}\begin{picture}(27,17)
\put(1,7){\includegraphics[width=3.5cm]{ntua-logo}}
\put (5.5,9.5){\Large Εθνικό Μετσόβιο Πολυτεχνείο}
\put (5.5,9){\Large Σχολή Εφαρμοσμένων Μαθηματικών\&Φυσικών Επιστημών}
\put (5.5,8.5) {\Large Τομέας Φυσικής}
\put (5.5,8) {\Large Εργαστήριο Πειραματικής Φυσικής Υψηλών Ενεργειών}
\put (1,1) {\huge Μελέτη ανιχνευτή \latintext{MicroMEGAS}}\end{picture}
\begin{tikzpicture}
\draw[color=white,opacity=1] (0,2) -- (10,2);
\draw[color=gray!50,fill=gray!50] (0,0) rectangle (25,-2);
\node at (3,-6) {\large Οκτώβριος 2012};
\end{tikzpicture}
}\hss
\vbox to \textheight{\hsize \CropFlap \vspace{20.5cm}     \begin{tikzpicture}\draw[color=gray!50,fill=gray!50] (0,0) rectangle     (4.5,-2);\end{tikzpicture}\vfill}}

\end{document}

The output is

What do you guys think?Which is better for a thesis? Any other suggestions are welcomed!!!


*Edit:*I also added an alternative to the last cover in a color version.

The code is

 \hbox to \textwidth{%
 \vbox to \textheight{\hsize \CropFlap 
 \vspace{20.5cm} \begin{tikzpicture}\draw[color=red,fill=red] (0,0) rectangle     (5,-2);\end{tikzpicture}\vfill}\hss
\vbox to \textheight{\hsize \UserWidth \vspace{20.5cm}     \begin{tikzpicture}\draw[color=red,fill=red] (-2,0) rectangle     (30,-2);\end{tikzpicture}}\hss
\vbox to \textheight{\hsize \CropSpine \vfill
\begin{sideways}\hspace{-10cm}\textcolor{blue}{Αθανάσιος Ν. Σταματόπουλος}  \hspace{5cm}    {\Large \textcolor{blue}{Μελέτη Ανιχνευτή \latintext{MicroMEGAS}}}      \end{sideways}\vfill}\hss
\vbox to \textheight{\hsize \UserWidth \vspace{1cm} \begin{tikzpicture}\draw[red,very     thick] (0,0) --(3,0); \node at (6.3,0) {\Large Σταματόπουλος Ν. Αθανάσιος}; \draw[red,very     thick] (9.6,0) -- (20,0); \end{tikzpicture}\\ \setlength{\unitlength}{1cm}\begin{picture}    (27,17)
\put(1,7){\includegraphics[width=3.5cm]{ntua-logo}}
\put (5.5,9.5){\Large Εθνικό Μετσόβιο Πολυτεχνείο}
\put (5.5,9){\Large Σχολή Εφαρμοσμένων Μαθηματικών\&Φυσικών Επιστημών}
\put (5.5,8.5) {\Large Τομέας Φυσικής}
\put (5.5,8) {\Large Εργαστήριο Πειραματικής Φυσικής Υψηλών Ενεργειών}
\put (1,1) {\huge Μελέτη ανιχνευτή \latintext{MicroMEGAS}}\end{picture}
\begin{tikzpicture}
\draw[color=white,opacity=1] (0,2) -- (10,2);
\draw[color=red,fill=red] (0,0.2) rectangle (25,-1.8);
\node at (3,-6) {\large Οκτώβριος 2012};
\end{tikzpicture}
}\hss
\vbox to \textheight{\hsize \CropFlap \vspace{20.5cm}     \begin{tikzpicture}\draw[color=red,fill=red] (0,0) rectangle     (4.5,-2);\end{tikzpicture}\vfill}}

The output of this code is as follows

What would you guys choose?

share|improve this answer
1  
This is nice. Suggest you consider submitting this template to latextemplates.com –  R. Schumacher Nov 6 '12 at 13:06
    
Really?Thank you very much! I have just done it! I hope people will find it useful! Any comments or opinions on which is best suitable for a thesis? –  Thanos Nov 6 '12 at 13:29

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.