Take the 2-minute tour ×
TeX - LaTeX Stack Exchange is a question and answer site for users of TeX, LaTeX, ConTeXt, and related typesetting systems. It's 100% free, no registration required.

I'm a novice in LaTeX and I use that code for having more sectioning levels, but when exporting to PDF the bookmarks of aditional levels are placed incorrectly. Does anyone know how can I place the bookmarks correctly?

\documentclass[a4paper]{report}

\makeatletter
\newcommand\level[1]{%
  \ifcase#1\relax\expandafter\chapter\or
    \expandafter\section\or
    \expandafter\subsection\or
    \expandafter\subsubsection\else
    \def\next{\@level{#1}}\expandafter\next
  \fi}
\newcommand{\@level}[1]{%
  \@startsection{level#1}
    {#1}
    {\z@}%
    {-3.25ex\@plus -1ex \@minus -.2ex}%
    {1.5ex \@plus .2ex}%
    {\normalfont\normalsize\bfseries}}

\newdimen\@leveldim
\newdimen\@dotsdim
{\normalfont\normalsize
 \sbox\z@{0}\global\@leveldim=\wd\z@
 \sbox\z@{.}\global\@dotsdim=\wd\z@
}

\newcounter{level4}[subsubsection]
\@namedef{thelevel4}{\thesubsubsection.\arabic{level4}}
\@namedef{level4mark}#1{}
\def\l@section{\@dottedtocline{1}{0pt}{\dimexpr\@leveldim*4+\@dotsdim*1+6pt\relax}}
\def\l@subsection{\@dottedtocline{2}{0pt}{\dimexpr\@leveldim*5+\@dotsdim*2+6pt\relax}}
\def\l@subsubsection{\@dottedtocline{3}{0pt}{\dimexpr\@leveldim*6+\@dotsdim*3+6pt\relax}}
\@namedef{l@level4}{\@dottedtocline{4}{0pt}{\dimexpr\@leveldim*7+\@dotsdim*4+6pt\relax}}

\count@=4
\def\@ncp#1{\number\numexpr\count@+#1\relax}
\loop\ifnum\count@<100
  \begingroup\edef\x{\endgroup
    \noexpand\newcounter{level\@ncp{1}}[level\number\count@]
    \noexpand\@namedef{thelevel\@ncp{1}}{%
      \noexpand\@nameuse{thelevel\@ncp{0}}.\noexpand\arabic{level\@ncp{1}}}
    \noexpand\@namedef{level\@ncp{1}mark}####1{}%
    \noexpand\@namedef{l@level\@ncp{1}}%
      {\noexpand\@dottedtocline{\@ncp{1}}{0pt}{\the\dimexpr\@leveldim*\@ncp{5}+\@dotsdim*\@ncp{0}\relax}}}%
  \x
  \advance\count@\@ne
\repeat
\makeatother
\setcounter{secnumdepth}{100}
\setcounter{tocdepth}{100}
\begin{document}
\tableofcontents

\level{0}{abc}\thispagestyle{empty}
\level{1}{abc}
\level{2}{abc}
\level{3}{abc}
\level{4}{abc}
\level{5}{abc}
\level{6}{abc}
\level{7}{abc}
\level{8}{abc}
\level{9}{abc}
\level{10}{abc}
\level{11}{abc}
\level{12}{abc}
\end{document}
share|improve this question
add comment

1 Answer

Most of the work is already done. It remains the definition of \toclevel@level<num> inside the loop:

\noexpand\@namedef{toclevel@level\@ncp{0}}{\@ncp{0}}%

hyperref already defines:

\def\toclevel@chapter{0}
\def\toclevel@section{1}
\def\toclevel@subsection{2}
\def\toclevel@subsubsection{3}
\def\toclevel@paragraph{4}
\def\toclevel@subparagraph{5}

The full example file:

\documentclass[a4paper]{report}

\usepackage{hyperref}
\usepackage{bookmark}
\bookmarksetup{open,numbered}

\makeatletter
\newcommand\level[1]{%
  \ifcase#1\relax\expandafter\chapter\or
    \expandafter\section\or
    \expandafter\subsection\or
    \expandafter\subsubsection\else
    \def\next{\@level{#1}}\expandafter\next   
  \fi
}
\newcommand{\@level}[1]{%
  \@startsection{level#1}%
    {#1}%
    {\z@}%
    {-3.25ex\@plus -1ex \@minus -.2ex}% 
    {1.5ex \@plus .2ex}%
    {\normalfont\normalsize\bfseries}%
}

\newdimen\@leveldim
\newdimen\@dotsdim
\begingroup
  \normalfont\normalsize  
  \sbox\z@{0}\global\@leveldim=\wd\z@
  \sbox\z@{.}\global\@dotsdim=\wd\z@
\endgroup

\newcounter{level4}[subsubsection] 
\@namedef{thelevel4}{\thesubsubsection.\arabic{level4}}
\@namedef{level4mark}#1{}
\def\l@section{\@dottedtocline{1}{0pt}{\dimexpr\@leveldim*4+\@dotsdim*1+6pt\relax}}
\def\l@subsection{\@dottedtocline{2}{0pt}{\dimexpr\@leveldim*5+\@dotsdim*2+6pt\relax}}
\def\l@subsubsection{\@dottedtocline{3}{0pt}{\dimexpr\@leveldim*6+\@dotsdim*3+6pt\relax}}
\@namedef{l@level4}{\@dottedtocline{4}{0pt}{\dimexpr\@leveldim*7+\@dotsdim*4+6pt\relax}}

\count@=4
\def\@ncp#1{\number\numexpr\count@+(#1)\relax}
\loop\ifnum\count@<100
  \begingroup\edef\x{\endgroup
    \noexpand\newcounter{level\@ncp{1}}[level\number\count@]
    \noexpand\@namedef{thelevel\@ncp{1}}{%
      \noexpand\@nameuse{thelevel\@ncp{0}}.\noexpand\arabic{level\@ncp{1}}}
    \noexpand\@namedef{level\@ncp{1}mark}####1{}%
    \noexpand\@namedef{l@level\@ncp{1}}%
    {\noexpand\@dottedtocline{\@ncp{1}}{0pt}{\the\dimexpr\@leveldim*\@ncp{5}+\@dotsdim*\@ncp{0}\relax}}%
    \noexpand\@namedef{toclevel@level\@ncp{0}}{\@ncp{0}}%
  }\x
  \advance\count@\@ne
\repeat
\makeatother
\setcounter{secnumdepth}{100}
\setcounter{tocdepth}{100}

\begin{document}
\tableofcontents

\level{0}{abc}\thispagestyle{empty}
\level{1}{abc}
\level{2}{abc}
\level{3}{abc}
\level{4}{abc}
\level{5}{abc}
\level{6}{abc}
\level{7}{abc}
\level{8}{abc}
\level{9}{abc}
\level{10}{abc}
\level{11}{abc}
\level{12}{abc}
\end{document}

Result

share|improve this answer
    
Thank you very much! That's perfect! –  Airenin Oct 19 '12 at 16:32
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.