Compiling only a page range or page selection

Question

How do I easily compile only a page range or page selection? That is, I would like a document that

• looks exactly like the full document,
• has only the subset of pages that were manually chosen, by page number (this can be one contiguous range or a more complicated selection, like "12-15,23,45-49"),
• has correct page numbers, and
• has correct links, except links to missing pages should be either dysfunctional or absent.

Answer 1

atbegshi provides the capability to discard a ready-to-be-shipped-out page using \AtBeginShipoutDiscard. Together with etoolbox's list-processing capability, you can easily discard/retain pages conditionally:

\documentclass{article}
\usepackage{lipsum,atbegshi,etoolbox}% http://ctan.org/pkg/{lipsum,atbegshi,etoolbox}
\makeatletter
\newcommand{\discardpages}[1]{% \discardpages{<csv list>}
  \xdef\discard@pages{#1}% Store pages to discard
  \AtBeginShipout{% At shipout, decide whether to discard page/not
    \renewcommand*{\do}[1]{% How to handle each page entry in csv list
      \ifnum\value{page}=##1\relax%
        \AtBeginShipoutDiscard% Discard page/not
        \gdef\do####1{}% Do nothing further
      \fi%
    }%
    \expandafter\docsvlist\expandafter{\discard@pages}% Process list of pages to discard
  }%
}
\newif\ifkeeppage
\newcommand{\keeppages}[1]{% \keeppages{<csv list>}
  \xdef\keep@pages{#1}% Store pages to keep
  \AtBeginShipout{% At shipout, decide whether to discard page/not
    \keeppagefalse%
    \renewcommand*{\do}[1]{% How to handle each page entry in csv list
      \ifnum\value{page}=##1\relax%
        \keeppagetrue% Page should be kept
        \gdef\do####1{}% Do nothing further
      \fi%
    }%
    \expandafter\docsvlist\expandafter{\keep@pages}% Process list of pages to keep
    \ifkeeppage\else\AtBeginShipoutDiscard\fi% Discard page/not
  }%
}
\makeatother
\discardpages{1,3,5,7,9,29,35,40}% Discard these pages.
%\keeppages{2,4,6}% Keep these pages.
\begin{document}
\lipsum[1-50]\lipsum[1-50]\lipsum[1-50]\lipsum[1-50]\lipsum[1-50]
\end{document} 

The above 47-page document is scaled down to 39 after having removed the 8 pages 1, 3, 5, 7, 9, 29, 35, 40 (as supplied by \discardpages{1,3,5,7,9,29,35,40}). To discard zero pages, you could use \discardpages{} (or make no call to \discardpages). Using \keeppages{2,4,6} instead leaves you with a 3-page document consisting of only pages 2, 4 and 6. It should not be that difficult to extend this to include more complicated page ranges.

The above has not been tested with hyperlinks from hyperref.

Answer 2

In the line of David Carlisle's answer, but using pure latex tools, I'm suprised no one mentioned pdfpages package.

You can compile your full document and then extract the required pages using another latex "driving" document whichs uses pdfpages. For example:

\documentclass{article} % Not really important
\usepackage{pdfpages}
\begin{document}
\includepdf[pages={12-15,23,45-49}]{main.pdf}
\end{document}

Answer 3

Also the following packages should be mentioned:

• selectp: [for plain TeX and LaTeX 2.09]

Select pages to be out­put

De­fines a com­mand \out­pu­tonly, whose ar­gu­ment is a list of pages to be out­put. With the com­mand present (be­fore \be­gin{doc­u­ment}), only those pages are out­put.

• selectpage:

Select pages to be out­put from a doc­u­ment

Re­quires a file of page num­bers, which spec­i­fies the num­bers of pages to print (in gen­er­ated or­der).

• pagesel: [for LaTeX 2𝜀]

Select pages of a doc­u­ment for out­put

Selects sin­gle pages, ranges of pages, odd pages or even pages for out­put. The pack­age is part of the oberdiek bun­dle.

(http://www.ctan.org/topic/page-control).

Answer 4

You can latex the full document and post process with a pdf tool there are several eg this one is on my system

NAME
       pdfseparate - Portable Document Format (PDF) page extractor

SYNOPSIS
       pdfseparate [options] PDF-file PDF-page-pattern

DESCRIPTION
       pdfseparate extract single pages from a Portable Document Format (PDF).

       pdfseparate  reads  the  PDF file PDF-file, extracts one or more pages, and writes one PDF file for
       each page to PDF-page-pattern, PDF-page-pattern should contain %d.  %d is replaced by the page number.

I was going to add that an alternative would be to get tex to only shipout certain pages but @Werner just posted code for such a solution so I'll just leave this as a post processing alternative (which can be more robust depending on the tex code that is interacting with the shipout changes).

Answer 5

Here is Werner's solution without the cost of the per-page loops.

\documentclass{article}
\usepackage{lipsum,atbegshi}
\makeatletter
\newcommand{\discardpages}[1]{%
  \xdef\discard@pages{\zap@space#1 \@empty}%
  \AtBeginShipout{%
    \@expandtwoargs\in@{,\the\c@page,}{,\discard@pages,}%
    \ifin@\AtBeginShipoutDiscard\fi
  }%
}
\newcommand{\keeppages}[1]{%
  \xdef\keep@pages{\zap@space#1 \@empty}%
  \AtBeginShipout{%
    \@expandtwoargs\in@{,\the\c@page,}{,\keep@pages,}%
    \ifin@\else\AtBeginShipoutDiscard\fi
  }%
}
\makeatother

% Examples:
\discardpages{1,3,5,7,9,29,35,40}
%\keeppages{2,4,6}
\begin{document}
\lipsum[1-50]\lipsum[1-50]\lipsum[1-50]\lipsum[1-50]\lipsum[1-50]
\end{document} 

Answer 6

I can't speak for the OP, but when I do this, I don't really want to use hardcoded page numbers. I want to break up a book into volumes, and \includeonly doesn't do what I want because I want a single table of contents and a single index to be included in both volumes. I also want, e.g., to be able to do a \pageref from vol. 2 back to a page number in vol. 1.

The perl script below is what I use for this purpose. It invokes pdftk to filter the pdf file that was output by pdflatex. Because pdftk is buggy and poorly maintained, I would actually suggest that others do this kind of thing using pdfjam or poppler utils instead.

There is a configuration file that looks like this:

1,2,,3,ch:intro,-1,
1,1,ch:intro,0,splits:startvol2,-3,
2,2,splits:startvol2,-2,splits:index,-1,
1,2,splits:index,0,splits:data,-1,
1,2,splits:data,0,end,,5

The first line, for example, says that both volume 1 and volume 2 should start at page 3 and continue until one page before the first chapter. ch:intro is the latex label for the first chapter.

#!/usr/bin/perl

use strict;

my $input_file = $ARGV[0];
my $vol = $ARGV[1];
my $output_file = $ARGV[2];


# reads save.ref and splits.config
#
# format of splits.config:
#    v1,v2,label1,offset1,label2,offset2,mod8
#    (v1,v2)=(1,1) means only include these pages in volume 1
#    (v1,v2)=(2,2) means only include these pages in volume 2
#    (v1,v2)=(1,2) means include these pages in both volumes
#    label1=latex label of beginning of range, or null
#    offset1=offset from label1; if label1 is null string and offset is +, then take offset1 as page number; if label1 is 'end' and offset is '', take last page
#    label2,offset2=similar for end of range
#    mod8=if not null, force it to start on a page of the output pdf that equals this, modulo 8
#      You typically want the output pdf to have a number of pages that is a multiple of 8. So, e.g., if LM has three pages of data, etc., at the end,
#      set mod8 to 5, so that the third page will equal 7 mod 8.

my %refs = ();
open(F,"<save.ref") or die "error opening save.ref for input";
while (my $line = <F>) {
  chomp $line;
  if ($line =~ /([^,]*),([^,]*),([^,]*)/) {
    my ($label,$name,$page) = ($1,$2,$3);
    $refs{$label} = $page;
  }
}
close(F);

open(F,"<splits.config") or die "error opening splits.config for input";
my @pages = ();
my $n = 0;
while (my $line = <F>) {
  chomp $line;
  if ($line =~ /([^,]*),([^,]*),([^,]*),([^,]*),([^,]*),([^,]*),([^,]*)/) {
    my ($v1,$v2,$l1,$o1,$l2,$o2,$m) = ($1,$2,$3,$4,$5,$6,$7);
    #print "$v1,$v2,$l1,$o1,$l2,$o2,$m\n";
    my $p1 = find_page($l1,$o1);
    my $p2 = find_page($l2,$o2);
    #print "pages $p1-$p2\n";
    my $chunk = 0;
    if ($vol>=$v1 && $vol<=$v2) {
      if ($p1%2 != 1) {push @pages,"B1"; ++$chunk}
      if ($m ne '') {
        while (($n+$chunk)%8!=$m) {push @pages,"B1"; ++$chunk}
      }
      push @pages,"$p1-$p2";
      if ($p2 ne 'end') {
        $chunk += (($p2-$p1)+1);
        if ($chunk%2!=0) {push @pages,"B1"; ++$chunk}
      }
      print "input $p1-$p2 -> output ",($n+1),"-",($p2 eq 'end' ? 'end' : $n+$chunk),"\n";
      $n += $chunk;
    }
  }
}
close(F);

my $c = "pdftk $input_file B=../share/misc/blank_page.pdf  cat ".join(' ',@pages)." output $output_file";
print "$c\n";
system $c;

sub find_page {
  my $l = shift;
  my $o = shift;
  if ($l eq '') {return $o}
  if ($l eq 'end') {return 'end'}
  if (!exists $refs{$l}) {die "label $l doesn't exist in save.ref"}
  return $refs{$l}+$o;
}

sub barf {
  my $message = shift;
  print STDERR "splits.pl: $message\n";
  print STDERR "You will need to edit splits.config.\n";
  exit(-1);
}

Answer 7

@Lover of Structure's comment as an answer:

\usepackage[26-30]{pagesel}

Include this before begin{document}. No other commands or extra files needed.

If you get a "temporary page" after the final page that won't go away, add a few \newpage and \clearpage commands followed by some random text just before \end{document} to add some extra pages, which Latex can then for some reason figure out how to trim off.