{abstract} is about customizing or creating abstract environments.

learn more… | top users | synonyms

2
votes
1answer
34 views

How can I put page numbers on my title page and abstract without it starting the numbering over?

I'm writing a report for a class and I've run into a bit of formatting trouble. I'm trying to put page numbers on every page per report instructions and that includes the title page and abstract. I've ...
0
votes
1answer
34 views
5
votes
1answer
39 views

Two abstracts in amsart class

I am trying to add two abstracts (one in english and one in spanish) to an article, one right after the other. I tried: \usepackage[spanish,english]{babel} \selectlanguage{spanish} \begin{abstract} ...
5
votes
3answers
112 views

Modify abstract appearance

there's two tweaks I don't know how to perform: 1. I'd like to remove the small indentation at the beginning of each paragraph. 2. Increase the paragraph break separation. ...
3
votes
2answers
265 views

How to place abstract text in front of abstract key?

I want to place my abstract text behind the abstract-key(which is used in all article), and left-aligned rather than centered on the page. How do I do this in LaTeX? I want the following format: ...
2
votes
2answers
57 views

How to change predefined Abstract?

In the conference paper, the predefined abstract is small and italicized. I can change the size and the position of the Abstract but I can't find anywhere how to un-italicize it. Is there a way to do ...
4
votes
2answers
143 views

Formatting my thesis document

I'm writing my thesis using \documentclass[report] and have two abstract sections in English and French. I switched languages using \selectlanguage[french]. I also added Acknowledgements using ...
3
votes
0answers
62 views

I can't get roman page numbering to work for pages before main writing section (e.g. TOC,LOF, abstract etc..)

I would like to make all pages before my introduction (TOC,LOF,LOT,abstract), excluding first 3/4 pages (title page, blank page) to be roman numerals with the first page of my introduction =page 1. ...
1
vote
2answers
1k views

One-column abstract in KOMA-script

I would like to make the abstract in KOMA Article appear on both columns, when writing a two column article. I would like to use internal koma options, instead of loading external packages. The ...
6
votes
2answers
131 views

How can i add the abstract and acknowledgment on the same page?

I want to add my abstract and acknowledgment on the same page as they only fill the half of the page in total, so it looks foolish to have them split into two pages. ...
13
votes
2answers
2k views

Lineno - numbering abstract's lines.

The package lineno.sty is not numbering my abstract's lines. Any suggestions? Thanks. \documentclass[a4paper,12pt]{amsart} \usepackage{indentfirst} \usepackage{hyperref} \usepackage{showkeys} ...
7
votes
1answer
1k views

Remove abstract from elsevier class

I am using the elsevier class to prepare a document. I would like to remove the abstract environment but I can not find the way to do that. I commented out \begin{abstract} .... \end{abstract} but I ...
16
votes
2answers
19k views

Putting abstract at the titlepage

My LaTeX file: \maketitle \begin{abstract} For over a century, fingerprints have been an undisputed personal identifier. Recent court rulings have sparked interest in verifying unique... ...
3
votes
1answer
50 views

header line in second page of abstract

I'm writing my thesis. In my abstract there is two pages. So, I want a head in second page. My MWE code: \documentclass[12pt,twoside,a4paper,openright]{report} \usepackage[portuguese]{babel} ...
1
vote
0answers
73 views

Keywords not showing up using journal template

So I am submitting a journal article to Elsevier, and using their template. However, I am unable to get keywords to work. I am replacing the dummy words with mine, but none of it is showing up. Can ...
1
vote
1answer
58 views

Modifying a thesis template: abstract environment

I am using a thesis template available here. I have a problem in working with this template: I would like to have a 'normal' abstract, directly after the title page. In this template the abstract is ...
2
votes
1answer
88 views

Document class: APA6 - problem using the abstract

First of all, I am a bloody beginner in LaTeX, searching for some help. I am using the document class APA6.cls and I want to separate the content of title page from the abstract page. Using \newpage ...
0
votes
0answers
12 views

centering abstract on a twocolumn layout [duplicate]

I'm using the twocolumn layout with article. I would like to have my abstract span the two columns (after title and authors, but before the first section). Is this possible?
1
vote
1answer
629 views

Why do I get an unnecessary blank page between abstract and acknowledgement?

There is an unnecessary blank page between abstract and acknowledgement. The content of abstract.tex is between \begin{abstract} and \end{abstract}. The content of ack.tex starts with ...
0
votes
1answer
69 views

Lyx add page number in abstract

Hi I'm desperately looking for a way to display the page number on my page in abstract. I'm trying to do this with the \chead{\thepage}, yet it won't work. The following screenshots show the view in ...
2
votes
0answers
41 views

metaUML class diagram: set some methods as abstract in an abstract class

I usually found the answer of my questions in StackExchange or over Internet. But this time I can't. I look for a lot yesterday and I didn't find a solution. Recently I started to use LaTex, and I'm ...
1
vote
1answer
176 views

Roman page numbering for abstracts in report class problem

I am writing a document with class report. I want that the first pages i.e. Declaration, Abstract, Acknowledgements, Table of Contents, List of Figures and List of Tables have page numbering roman, ...
0
votes
0answers
85 views

Tex file for preparation of Book of Abstract

I want to prepare a book of abstract by latex. I would like to include the following things in the document 1. A Cover page 2. A page for FOREWORD 3. List of content (abstract title) along with page ...
0
votes
1answer
38 views

Automatically adjusting abstract from one to two columns and back

I am editing the latex template that has a custom abstract environment. I would like to keep the width of (0.65) in two column mode, but to change to full width in single column mode. Would someone ...
3
votes
1answer
63 views

Copy the abstract environment for acknowledgments

I would like to create an acknowledgments environment that's simply the duplicate of the abstract environment, with two exceptions: It should print Acknowledgments as its heading, not Abstract. The ...
1
vote
2answers
75 views

Remove indentation from abstract environment with etoolbox

I have the abstract for my paper on a separate page, hence there is no need to have the extra indentation on either side of the abstract environment to indicate that it is an abstract. There is an ...
0
votes
1answer
78 views

Remove left and right indentation of abstract

Trying to remove the indentation which is appearing around my abstract for some unknown reason. A MWE is below: \documentclass[a4paper,oneside,10pt]{article} \usepackage[english]{babel} % formatting ...
2
votes
1answer
60 views

How to detect if abstract reaches a second page, in order to add a header

I'm writing a thesis for which the very first page (or 2 if it's long enough) is the abstract. I have two formatting requirements that I can't figure out, when the abstract continues onto the second ...
0
votes
0answers
57 views

Show Abstract Title in Latex

I'm using a latex template given to me to write up a project I'm writing. However, above the abstract, it does not explicitly show the title "Abstract" which I would like it to do. The document is a ...
4
votes
1answer
339 views

How do I put a figure* before my abstract?

I'm sadly not using double-column abstract, just single-column. This is based on the sigchi document class: https://code.google.com/p/sigchi-latex/ The obvious thing: \documentclass{sigchi} ...
5
votes
2answers
168 views

More economic and robust command for abstract at the beginning of chapters

I want to put an abstract at the beginning of each chapter. I have cooked up a command in that aim, but it looks neither economic, nor robust (sometimes it is shifted to the right). How to improve ...
3
votes
0answers
65 views

two abstract in article

I need to include two abstracts (english and spanish) with their respective keywords, I am using the package apa6 but these only put the latest \abstract{} text. How can I fix this? ...
2
votes
1answer
93 views

Abstract font shape?

I am writing an article using the following asme2e class: http://iel.ucdavis.edu/code/ASME/conf-1.6b.html I want to change the font shape in the abstract. It is italic, but I want it in normal font. ...
1
vote
0answers
41 views

Why there's a page difference between the title of the paper and the abstract? [duplicate]

Can you please tell me what causes a page difference between the title/authors and the abstract? \begin{document} \title{\LARGE Spectral Clustering vs Wavelet Clustering: A Comparative Study} ...
4
votes
1answer
1k views

How can I add abstract to table of contents

I believe it is correct to add the abstract to my TOC but I don't know how. This Answer talking about adding the abstract chapter to the TOC. I'm using Lyx and if I output to .tex file this is what I ...
7
votes
1answer
158 views

Make a second “table of contents” incorporating a short summary for each section

Suppose I have a document looking like this: \documentclass{article} \begin{document} \tableofcontents \section{A} \subsection{A.A} \subsection{A.B} \section{B} \subsection{B.A} ...
4
votes
1answer
72 views

new page created when using the \begin{abstract} command

I am using emulateapj and am trying to put an abstract in like so: \documentclass{emulateapj} \setcitestyle{authoryear,round,comma} \begin{document} \begin{abstract} hello world! ...
4
votes
1answer
91 views

Use abstract environment from other document class

I am using the KOMA-scrartcl class at the moment for compiling multiple single papers into a combined document. Now I'd like to switch over to the scrreprt class (I'd like to use chapters), but for ...
1
vote
2answers
940 views

Title, abstract, and text beginning on same page

What I want to do, is to create a document, which starts off with a title-minipage, abstract, and then start the main section. Ideally, i would like to do it on the same page, kind of like a magazine ...
12
votes
3answers
1k views

Consistent way to define document title, subtitle, author, affiliation, abstract etc

Many document classes seem to have their own way of defining document title and author information, often with only subtle differences. (\title seems to be pretty much standard everywhere, in contrast ...
12
votes
1answer
5k views

How to rename Abstract title in Memoir?

I'm trying to customize the Abstract of a memoir document using the following command: \renewcommand{\abstractname}{Executive Summary} The problem is that it actually has no effect. How can I ...
0
votes
0answers
80 views

Using fonts - latex

Can anyone explain me why I can't have an output like this using this code? Code, thanks @Bernard : \documentclass[12pt,french]{report} \usepackage[utf8]{inputenc} ...
2
votes
2answers
168 views

Making the abstract's font looks better

How do I to make this Abstract's font written in Frensh looks better? Any brilliant idea, please ? For example, this font-style that I can't find how to make it: Its related code: ...
2
votes
2answers
113 views

Enumerate in Abstract (scrartcl-class)

When using the enumerate environment inside the abstract environment of the scrartcl-class, the intend for the first item does not match those of the following items: \documentclass{scrartcl} ...
0
votes
2answers
60 views

How to add a section* to the list of contents, but without giving it a number? [duplicate]

I have several section* 's in my LaTex text. But I only want the first one (abstract) to appear in the list of contents, although without a number. All the other section* 's are just a few ...
1
vote
0answers
52 views

What is abstract for? [closed]

Could someone explain me what abstract http://en.wikibooks.org/wiki/LaTeX/Document_Structure#Abstract is used for? I don't see the sense.
3
votes
1answer
163 views

tocloft moving toc onto title page below abstract

I am using the tocloft package in order to reduce the space between the toc header and the table of contents itself. However, the package is causing the table of contents to move up onto the title ...
2
votes
0answers
102 views

long abstract not continuing to next page in ERDC style

I am trying out a report format with the ERDC style, but using pdflatex, the abstract is limited to 1 page - the text just disappears off the bottom of the page and won't continue. I've looked through ...
7
votes
2answers
2k views

How to adjust the width of abstract?

I would like to change my abstract's text width. For now I have something like this: \begin{abstract} \lipsum \end{abstract} I have tried wrapping my text with \begin{minipage}{0.85\textwidth} ...
1
vote
1answer
89 views

Force the abstract onto a new page

I have a document that has the header "Abstract" at the very bottom of the first page, and then the actual text of the abstract is on the second page. The rest of the first page is taken up with ...