{algorithm2e} is a package providing a floating algorithm environment with algorithmic keywords.

learn more… | top users | synonyms

3
votes
1answer
146 views

Algorithm2e - Disabling line numbers for specific lines

The Algorithm2e package has specific options for disabling/hiding line numbering for the whole document or algorithm, and then enabling/showing them for specific lines. I want to do the inverse. I ...
2
votes
0answers
30 views

How to complete the algorithm using algorithm2e

I wanted to write this flowchart using \usepackage[linesnumbered,ruled,vlined]{algorithm2e} However, I couldn't get what I want, please refer to my code in below \begin{algorithm} ...
2
votes
1answer
77 views

PDF reference links when using hyperref and (`ruled`) algorithm2e

I was testing some links within my produced PDF file and recognized that all of the links to an algorithm (from the algorithm2e package) will jump to the beginning of the algorithm with skipping half ...
1
vote
0answers
23 views

Using algorithm2e with polyglossia produces undesired emphasized text

Here's a minimal working example: \documentclass[a4paper]{article} \usepackage{fontspec} \setmainfont{CMU Serif} \setsansfont{CMU Sans Serif} \setmonofont{CMU Typewriter Text} ...
0
votes
0answers
19 views

Removing the box around an algorithm

I am using the Algorithm2e package for some algorithm in my reports: link However, there is a "frame" around the algorithm that I would like to remove. I don't find in documentation a way to remove ...
10
votes
2answers
2k views

How can I put a curly brace inside an algorithm to group code lines?

I am using the algorithmic package (or even algorithm2e is fine). Is it possible to use curly braces to group some lines in the algorithm so as to be able to put an explanation to the right?
4
votes
2answers
1k views

Changing label name for algorithm

I have this algorithm: \begin{algorithm} \captionsetup[algorithm]{name=MegaAlgorithm} \DontPrintSemicolon \KwData{$G=(X,U)$ such that $G^{tc}$ is an order.} \KwResult{$G’=(X,V)$ with $V\subseteq U$ ...
1
vote
1answer
26 views

break a line of function in algorithm2e

I tried various ways to break a line of function but did not succeed. As you can see from the image, I was trying to break the line at the position of a function parameter. Can anybody please take ...
1
vote
0answers
91 views

when is Implementation of example into LATEX2e?

When the write into texwork the following : \begin{algorithm}[H] \SetAlgoLined \KwData{this text} \KwResult{how to write algorithm with \LaTeX2e } initialization\; \While{not at end of this ...
5
votes
1answer
50 views

How to reduce indentation size within loop of an algorithm

For the following algorithm, I get four spaces for each text line inside the loop. How can I get only two or three spaces? Some of my text lines go to next line. I want to save some horizontal spaces. ...
1
vote
0answers
34 views

Huge algorithm taking up space [duplicate]

I have an algorithm description that takes up an entire image. However, when compiling my latex document, the algorithm and subsequent images following it are pushed to the end of the document. I ...
3
votes
1answer
74 views

algorithm2e comment style

I wanted to know how to change the comment style in the algorithm2e package. I want to make my comments of a smaller font and a different color: \documentclass{article} \usepackage{color} ...
7
votes
1answer
1k views

How to split algorithm2e over two pages

I'm using algorithm2e package but my algorithm does not fit in only one page. Is there any way to split it over two pages, even if manually? If doing it manually, we can use two algorithm ...
2
votes
1answer
36 views

Increase Vertical Line Length in Algorithm Block

I would like to increase the line length of the vertical line between the start and the end of the block in the following example using the algorithm2e package: \documentclass{article} ...
6
votes
2answers
74 views

Add text right below the algorithms

I try to add some texts used to illustrate the algorithms right below the bottom line of algorithms. \documentclass{article} \usepackage[ruled]{algorithm2e} \usepackage{amssymb} \usepackage{amsmath} ...
6
votes
1answer
176 views

Algorithm: write if-then-return or else-return in one line?

I can easily generate the following algorithm statements using algorithm2e package. As can be seen from the image, return statement (should hold for other statements too) will be placed in a new line ...
3
votes
1answer
86 views

How to control the caption of algorithm2e by captionsetup?

I want to change the appearance of the caption for algorithms written by algorithm2e package using the caption package. In captionsetup one can easily customize the caption depending on the float ...
4
votes
1answer
90 views

Splitting an algorithm across two columns

Consider the following short example, where a two column page is selected, and the algorithm is split across the two columns using a manual \pagebreak within the algorithm's code: ...
1
vote
0answers
17 views

Indentation lines in algorithm package [duplicate]

I am using the algpseudocode and the algorithm2e package, and want the lines down below the indents like below (the example on the algorithm here). Does anyone know how to achieve this easily?
4
votes
1answer
95 views

Remove the rule below the algorithm title - using Algorithm2e

I'm using algorithm2e package. One of my algorithm does NOT need a title. If I simply do not type in \caption, there are still three rules.! I want to remove the second rule. Is there any way to do ...
0
votes
0answers
60 views

How to manually set a line number for end statement in algorithm2e?

I can manually set line numbers in an algorithm2e environment using the \nlset command (together with \LinesNotNumbered). However, I can't figure out how to make the same for lines with the end or ...
4
votes
1answer
49 views

How to make a hbox several lines under the specified place?

Recently I asked How to colourfuly highlight some lines of an algorithm using algorithm2e? I wanted to acheive this effect using the algorithm2e package: Thanks to JLDiaz's answer I know how to do ...
4
votes
1answer
52 views

Weird behaviour of \FuncSty in algorithm2e

I'm using the small capital font \textsc{MyAlgorithm} several times inside my algorithm2e environment as follows: \documentclass[a4paper, english]{article} \usepackage{amsmath} \usepackage{amssymb} ...
2
votes
1answer
110 views

How can I colourfuly highlight some lines of an algorithm using algorithm2e?

I am trying to achieve something like this: This image is linked from this answer. This answer also provides a solution and seems simpler. Both answers deal with the algorithmicx package however. ...
1
vote
0answers
16 views

Reference links to algorithm but shows? [duplicate]

I am using algorithm2e when I reference an algorithm it shows ?? which links to the correct algorithm, but it should show something like 1.1. Any suggestions as to how I can fix this? Here is an ...
8
votes
1answer
107 views

algorithm2e: Applying color to an entire line, excluding the line number

Consider the following MWE: \documentclass{article} \usepackage{xcolor} \usepackage[boxed, noline, linesnumbered]{algorithm2e} \begin{document} \begin{algorithm}[t] ...
3
votes
1answer
115 views

Algorithm2e does not allow nested if

I was trying to put a nested if in algorithm area like this: \If{$isContentMethod(\mathcal{M})$}{ $URI \leftarrow getURI(SubCG, \mathcal{M})$\; \If($URI \in ...
3
votes
1answer
106 views

Infinite loop with Algorithm2e

I'm using Algorithm2e and want a loop with no intial condition and no ending condition. Using Algorithmic, this can be achieved with \Loop ... \EndLoop, but I cannot find a similar loop for ...
3
votes
2answers
157 views

Two algorithm2e environments side by side

I want to get two algorithm2e environments side by side aligned at the top. I tried it with two minipages, but it does not work. How do I get them side by side in the normal text (not in a floating ...
8
votes
1answer
245 views

Algorithm2e caption above code

I can't seem to figure out how to place a caption at the beginning of an algorithm2e pseudo code. I know it's possible with the ruled environment, but I don't want those lines at the top and the ...
7
votes
1answer
299 views

How to use the algorithm2e package with IEEEtran class?

The IEEEtran documentation suggests that I should not use the floating algorithm environment of algorithm2e.sty. B. Algorithms IEEE publications use the figure environment to contain ...
0
votes
0answers
118 views

Big algorithm causing big mess

I am writing a document in which I needed to include the description of the Number Field Sieve (NFS) algorithm as mentioned in the book by Crandall and Pomerance. The algorithm's pseudo code is ...
4
votes
1answer
75 views

Tocloft customizations not working for algorithm's list

I have been fighting with tocloft to get it to apply some customizations across all the listings, but it seems that they only work for the default ones like "tocs", "lofs" and "lots". For the ones ...
2
votes
1answer
53 views

Equivalent to hypcap for [ruled]{algorithm2e}?

I just discovered the hypcap packages which improves the \ref link to point before the figures and tables instead of to captions. How can I do the same with my algorithms written with algorithm2e ...
7
votes
2answers
224 views

How to write pseudo code in other languages (Spanish)?

I'm using this code in LaTeX \documentclass[12pt,a4paper]{report} \usepackage[spanish]{babel} \selectlanguage{spanish} \usepackage{algorithm2e} %for psuedo code ...
1
vote
0answers
22 views

How to use dotted line to make indentation clearer in algorithmicx? [duplicate]

I wish to indicate clearly when a block starts and ends with "enclosing lines" in addition to the indentation. I understand that I can do it with algorithm2e like so \begin{algorithm}[H] \SetLine % ...
4
votes
1answer
154 views

Caption below boxed algorithm2e when used as a figure?

My desired output is similar to the example given in this answer, in that I want the caption below the algorithm and outside the box, except I want the algorithm included as a figure (so I use ...
3
votes
2answers
140 views

How to align text within an algorithm environment?

I wish to duplicate an effect I've seen elsewhere (image below) in which text not necessarily at the beginning of a line is aligned with text elsewhere. I don't know which environment is suitable, ...
0
votes
1answer
87 views

Algorithm2e Comment Lines w/out semicolons [closed]

For some reason even when I enable \DontPrintSemicolon there are still semicolons on lines with comments. This is in Algorithm2e version 3.9. \documentclass[12pt]{article} ...
0
votes
0answers
91 views

Macros like \TitleOfAlgo not recognised in algorithm2e v5.0

I cannot get any macros working from the algorithm2e package. My particular example is to do with the title. In reference to numbering / not numbering algorithms, page 20 of the algorithm2e package ...
2
votes
1answer
254 views

Trouble submitting paper to arXiv - amsart issues?

I just attempted to submit a paper to the arXiv. Unfortunately, they would not accept a .pdf and insisted on the LaTeX source code. I uploaded the LaTeX source code along with three figures in .pdf ...
5
votes
2answers
483 views

How to see the Steps number in an algorithm

In below algorithm I have used the package \usepackage[linesnumbered,ruled,vlined]{algorithm2e} 1) How do I see steps number after step 2? 2) Is there any command apart from ...
5
votes
1answer
430 views

Caption spacing using algorithm2e

I am trying to add some spacing above/below captions of algorithms using the algorithm2e package. Consider the following example: \documentclass[a4paper]{article} \usepackage{blindtext} ...
5
votes
1answer
439 views

Change line spacing in algorithm2e

I'm using the algorithm2e package. In one algorithm with several math formulae in consecutive lines I would like to increase line spacing. I've already searched algorithm2e's documentation but could ...
4
votes
2answers
576 views

How to avoid the number line for comments under algorithm2e

In the declaration of the input and output data, I would like to add a comment in order to explain the kind of data. I use: \usepackage[ruled,vlined]{algorithm2e} My code is: \begin{algorithm}[!ht] ...
5
votes
2answers
3k views

How do remove equation number in an algorithm

Here is the code. Even I have used the command \nonumber still I can see the equation number \begin{document} \begin{algorithm} \DontPrintSemicolon % Some LaTeX compilers require you to use ...
6
votes
1answer
220 views

Issue with algorithm2e “input” alignment

If you look at the image below you will see that on the 4th line of the input, the alignment resets for some reason and I'm not sure why. Could someone show me how to fix this? ...
4
votes
1answer
73 views

Line in algorithm2e environment wrapping late

I am having a small issue where where the line Let $s$ be the highest-ranked student in $h$'s preference list which $h$ has not yet requested to be a resident\\ in my algorithm is wrapping a ...
3
votes
2answers
444 views

algorithm2e with boxruled gives overfull hbox

I am using the algorithm2e package with the boxruled option to format my pseudo-code. However, I am getting an overfull hbox, which I suspect is due to margin/box conflicts. Does anyone have a fix ...
3
votes
1answer
283 views

Strange interaction between natbib and algorithm2e

Here's a minimal example. \documentclass{article} \usepackage{titlesec} \usepackage{algorithm2e} \usepackage{natbib} \begin{document} \bibliographystyle{plainnat} \begin{thebibliography}{1} ...