1
vote
0answers
37 views

Trouble creating custom algorithm environment with separate counter

I am trying to create a custom algorithm environment for CUDA kernel code that runs on the GPU, but have little experience with custom LaTeX. It should have a separate counter, be referenced as Kernel ...
0
votes
1answer
31 views

How to write an algorithm in french? [Errors]

I am trying to write my algorithm in french language. I found this solution which works for me but with errors. The errors are: \algorithmicendelsif undefined \algorithmicendif undefined ...
0
votes
0answers
12 views

Referring to a correctly-styled pseudocode procedure name from the main text [duplicate]

I'm using the recommended algpseudocode package, and have defined a procedure inside an algorithmic environment that I would like to refer to from the main text. Inside this environment, ...
4
votes
1answer
151 views

Can the coding style of the algorithm environment be modified?

I'm using the packages \usepackage{algpseudocode} \usepackage{algorithm} to produce a pseudocode of the following algorithm: \begin{algorithm} \centering \caption{Octree based search ...
7
votes
2answers
100 views

algorithm with partial borders/frames

I use the algorithm float environment for pseudocode and want some algorithms to span two pages. That works fine with \algstore and \algrestore. However, I would like to omit these borders at the end ...
1
vote
1answer
37 views

Possible to put an algorithm inside a \begin{itemize}?

Is it possible to put an algorithm inside a \begin{itemize} as one of the \items?
6
votes
2answers
96 views

Text below line at end of algorithm?

I am using the algorithm and algpseudocode packages. When I define an algorithm it ends with a horizontal line. I would like to have some text below this horizontal line explaining some special case ...
1
vote
1answer
104 views

Code is a mess because I cannot indent inside a for loop in my algorithm

I have a for loop in my algorithm and I can't get latex to properly indent the pseudocode inside it. It's just a mess at the moment, it won't even put the code in the for loop on separate lines. ...
5
votes
1answer
44 views

Referring to correctly-styled algpseudocode procedure name in document

Given an algorithm written in algpseudocode: \documentclass{article} \usepackage{algorithm} \usepackage{algpseudocode} \begin{document} \begin{algorithm} \caption{Part 1} \begin{algorithmic}[1] ...
3
votes
2answers
72 views

Fixing the location of the appearance in algorithmicx environment

I'm trying to force an algorithm to stay between two paragraphs, but after compilation, it shows up in the next page. My algorithm takes more than half a page and is something like: ...
4
votes
1answer
172 views

Change algorithmicx caption name

I am trying to change the Caption name of Algorithmicx but it doesnt work. This what i include to use it. %pseudocode \usepackage{algorithm} \usepackage{algorithmicx} \usepackage{algpseudocode} ...
5
votes
1answer
123 views

Customizing some aspect of algorithmic environment

I'm using the algorithmic environment for typesetting algorithm in my document, but I'd like to customize some aspect and fix problems. I'm using the algpseudocode package with noend option, but it ...
4
votes
1answer
195 views

Algorithm input in a box

I am trying to write pseudo code \documentclass[a4paper]{article} \usepackage[english]{babel} \usepackage[utf8x]{inputenc} \usepackage{amsmath} \usepackage{graphicx} ...
4
votes
2answers
92 views

Algorithmicx multiple statements per line aligned over all lines

I would like to put a <- b and e <- f, in parallel on a single line in an algorithmicx environment. I want the same with c <- d and g <- h. Then I want to align both lines. The output ...
3
votes
4answers
155 views

Incorrect reference to a line in algorithmic using hyperref

I am using algpseudocode and algorithm packages to typeset pseudocode. I also use float, hyperref and caption packages. The problem is that when I reference a line in the pseudocode, the number is ...
3
votes
1answer
459 views

Reduce the line number font size of pseudocode?

I have learned from here on how to reduce the font size in the pseudocode. The last thing left for me is to reduce the line number font size as well. The following is my MWE, and it seems that ...
3
votes
1answer
620 views

How may I remove \EndIf and \EndFor in algorithmicx?

For space consideration, I wish to condense my pseudocode. I find it a bit annoying to me to always have a \EndIf or \EndFor at the end of every block, especially when inside the block only lies one ...
2
votes
2answers
1k views

Pseudocode: \Function vs. \Procedure?

The title says it all. What is the difference between a Function and a Procedure? When should I use which?
1
vote
0answers
23 views

How to use dotted line to make indentation clearer in algorithmicx? [duplicate]

I wish to indicate clearly when a block starts and ends with "enclosing lines" in addition to the indentation. I understand that I can do it with algorithm2e like so \begin{algorithm}[H] \SetLine % ...
6
votes
1answer
821 views

Vertical loop/block lines in algorithmicx with 'noend' option

I am using the algorithmicx package to write an algorithm. However I am using the noend option: \usepackage[noend]{algpseudocode} Is there anyway to get vertical lines for each block of code? This ...
3
votes
1answer
203 views

Indenting pseudocode

I am very new to TeA, and am having trouble indenting a block of pseudocode within an enumeration. Or perhaps more specifically, the algorithm's pseudocode seems to ignore the enumerations ...
0
votes
0answers
79 views

How to write this algorithm properly

Here I have attached the current code \begin{document} \begin{flushleft} \begin{picture}(10,5) \put(1,1){\line(1,0){450}} \end{picture} \end{flushleft} \textbf{\textit{Algorithm:}} Curves on ...
2
votes
1answer
569 views

Self-defined Width of the Pseudocode Box with algorithmicx?

This post has beautifully shown how to make the algorithm pseudocode box as wide as one column or two columns. I am now writing a pseudocode with many if layers. So a one-column box cannot suffice. ...
8
votes
2answers
303 views

How to automatically keep the indentation level when a line has to be broken

I'm using the algpseudocode package with two custom commands, \Let and \LongState to handle automatic indentation of (broken) long lines in the spirit of Werner's answer, which uses \parbox to wrap ...
10
votes
1answer
571 views

Algorithm as figure and without italic and bold formatting?

I want to include an algorithm in my latex document, however without printing most of it in italic and all the keywords in bold font like it's done by default by e.g. the algorithmicx package. I like ...
4
votes
1answer
167 views

acmsmall breaks line number alignments of algorithms

I am formatting an article with one of the ACM journal formats: acmsmall. However, when I look at algorithms, I noticed that the lines of my algorithm lost their indentation. This problem does not ...
1
vote
1answer
102 views

How to define new loops in algorithmicx?

How can I define a new loop in algorithmicx? For example, code like this: ex1) PreLoop s do --statement1 --statement2 ex2) PostLoop s do --statement1 --statement2 Is it possible to define it ...
1
vote
1answer
136 views

Algorithms in mdframed

Now that I converted all my theorems to mdframed, I'd like a consistent layout for my algorithms as well? What ways are there to typeset pseudocode algorithms in mdframed? So far I've been using ...
3
votes
1answer
969 views

cleveref fails to reference algorithms

In the following example document, both \autoref and plain ref will correctly link and number an algorithm reference, but cleveref fails that task. It will just insert question marks instead. In ...
5
votes
2answers
1k views

Caption numbering breaking up an algorithm with algorithmicx

According to its documentation, algorithmicx package allows break up an algorithm inside a document, as follows: Related tex code is: \documentclass{article} \usepackage{algorithm} ...
2
votes
1answer
202 views

Line break inside procedure's definition with algorithmicx

I don't know if this package is the best for my purpose, but I'm using algorithmicx (see here the documentation) to write algorithms (in pseudcode) inside my work. At now, I've just a problem: ...
4
votes
1answer
979 views

Ploblems with vertical lines in algorithmicx

I use algorithmicx with verical lines. And code is working good: \documentclass{article} \usepackage{algorithm} \usepackage{algpseudocode} % Vertical line \makeatletter ...
6
votes
1answer
1k views

Numbering in algorithmicx

I have simple code: \documentclass{article} \usepackage{algorithm} \usepackage{algpseudocode} \begin{document} \begin{algorithm} \caption{Examples}\label{alg:Examples} \begin{algorithmic}[1] ...
3
votes
1answer
618 views

Line number error using “Require” and “Ensure” in package{algorithmicx}

I’m using the packages algorithmicx and algpseudocode to write algorithms in my paper. It’s more convenient and beautiful to specify comments than with the algorithmic. But I encounter an error while ...
0
votes
0answers
41 views

writing part of a pseudocode [duplicate]

I have a few pseudocode lines like for each item in list L if (item > 50)| (item > 50)|(item > 50) value=item break; Obviously, this is not the exact code :). If I use a package ...
2
votes
0answers
151 views

Divide algorithm inside If EndIf

This is a follow-up question to Option in the algorithm with Latex. This is the code: \begin{document} \begin{algorithm} \caption{My algorithme} \begin{algorithmic}[1] \Donnees: My data ...
4
votes
1answer
886 views

Slight change in algorithm

This is my MWE for an algorithm however its throwing an error and I don't know how to get inputs and initialize. I want it to look like the attached image. ...
5
votes
0answers
55 views

Review of algorithm-related packages? [duplicate]

Possible Duplicate: Print programs with its proper syntax Where can I find (if it exists) an updated review of the most relevant packages for handling with algorithms (pseudocode or code ...
0
votes
1answer
1k views

Algorithm in LaTeX

I wrote the following algorithm, however its not compiling and throws a few errors. I am not sure of what I did wrong. Any help would be appreciated. \begin{algorithm} \caption{Bridging ...
6
votes
1answer
1k views

Line numbering in algorithmic

I want to change the first number of the line numbering in my algorithm, but how is it done? This is my example: \documentclass[12pt]{beamer} \usepackage{amsmath, amsfonts, amssymb, amsthm} ...
2
votes
1answer
987 views

Writing Pseudocode in LaTeX

I cannot seem to get any of the LaTeX pseudocode packages to work correctly on my computer. For example, if I run this block of code: \documentclass{article} \usepackage{algorithm}% ...
8
votes
1answer
2k views

Adjust the indentation whithin the algorithmicx-package when a line is broken

I have this code \documentclass{article} \usepackage{algorithm} \usepackage{algpseudocode} \begin{document} \begin{algorithm} \caption{Minimal Working Example for my Problem} ...
2
votes
1answer
3k views

Functions with no parameters in algorithmicx

I am trying to write an algorithm using algorithmicxand I need to put a function with no parameters. I use \Function {foo}{} latex produces: function FOO However I need: function FOO() ...
4
votes
2answers
5k views

customizing the algorithmic package: break and loop labels

I would like to add two customizations to the algorithmic package: introduce a new break command and have the possibility to provide labels to the LOOP so that break {label} is clear to which loop is ...
11
votes
1answer
5k views

algorithm numbering

I am having trouble numbering and referencing algorithms. I want to have the references labeled by the chapter, then within the chapter, such as: First algorithm in chapter 1 - Algorithm 1.1 ...
12
votes
2answers
1k views

Coloring lines in an algorithm

I am using Beamer for creating a presentation and I am trying to highlight some lines in an algorithm. I am actually using algcompatible. I found a solution here and created a couple of new commands ...
3
votes
1answer
607 views

Pseudocode overflow out of column

I am writing pseudocode using the algorithmicx package in IEEEtran class (double column). My problem is, some of the statement in the code are quite long which I expected to wrap to next line. ...
8
votes
1answer
2k views

Translate “Algorithm” in the caption

This is my code \begin{algorithm} \caption{Funkcija ACO} \label{alg:aco} \begin{algorithmic} \STATE{do something} \end{algorithmic} \end{algorithm} it produces a caption like this ...
14
votes
1answer
3k views

Mark a pseudocode block and insert comments near it

I am currently working on a LaTeX beamer presentation where I have to explain an algorithm. So I wrote this algorithm with \usepackage{algorithm,algpseudocode} This is the current algorithm: ...
7
votes
1answer
11k views

Algorithm and IEEEtran

I'm trying to write an algorithm in a IEEEtran LaTeX template and it doesn't work in any way. \usepackage{algorithm} \usepackage{algorithmc} %\begin{algorithm}[H] \begin{algorithm*} \caption{ASGP ...