{amsart} is a document class provided by AMS, roughly equivalent to `article`, but conforming to the AMS journal style.

learn more… | top users | synonyms

0
votes
1answer
330 views

Amsart Section title and figure in appendix

OK Now I have two problems: first the MWE \documentclass[12pt,reqno]{amsart} % \usepackage{graphicx} %for Abc format title and author list \makeatletter \g@addto@macro{\endabstract}{\@setabstract} ...
3
votes
1answer
546 views

Subequation number not shown (empheq+amsart)

This is a Follow-up question to Number equations within array In the original post I was asking about the basics of subnumbering equations and I got satisfactory answers so I could implement the ...
8
votes
1answer
152 views

How to nest a square root in another square root?

So I am trying to write using the amsart package ($\sqrt[n]{X_{1}*...*X_{n}}$ *$\sqrt[n]{X_{n+1}*...*X_{2n}}$)^{1/2} but instead of ^{1/2} nested in another sqrt. However $\sqrt[ ...
2
votes
1answer
792 views

Trouble submitting paper to arXiv - amsart issues?

I just attempted to submit a paper to the arXiv. Unfortunately, they would not accept a .pdf and insisted on the LaTeX source code. I uploaded the LaTeX source code along with three figures in .pdf ...
4
votes
1answer
487 views

Remove period at the end of subsubsection

I am using amsart. For specific isolated uses of subsubsection*, I would like to prevent the addition of a period at the end of the title. MWE: \documentclass{amsart} \usepackage{tikz} ...
7
votes
1answer
322 views

No indent in the first paragraph in amsart?

I would like to remove all the first indentations in amsart, so I am seeking for an "indentfirst=false" command. Note that amsart do indents the first paragraphs by default (so the suggested solutions ...
5
votes
2answers
345 views

Wrong position (on separate page) of sideways figures in amsart

I run into a problem when running sidewaysfigure in amsart. The code below illustrates \documentclass[a4paper,reqno]{amsart} %\documentclass{article} \usepackage{graphicx} ...
11
votes
1answer
236 views

How to report *amsart* bugs? (Looks like a bug to me.)

I have noticed the following strange behavior when using a custom counter in certain situations in amsart document class. Here is an example: \documentclass{amsart} \newcounter{exercise} ...
4
votes
1answer
213 views

Sizes in bibliography files

I have a file using amsart and accessing an external .bib file. I would like to generate a separate file of just the references appearing in my file. But I would like the entries in this file to ...
4
votes
3answers
1k views

Problem with margins using amsart and geometry packages

I do not want different margins on even and odd sides, I just want the usual page setup from the amsart package. However, consider: \documentclass{amsart} \usepackage{geometry} \usepackage{lipsum} ...
5
votes
2answers
336 views

Line spacing inside quote environment in amsart (removing extra white space)

This is a follow-up to Line spacing inside quote environment. I'm using the amsart document class, with a specifically defined line-spacing for the whole document. When I adjust the line-spacing ...
3
votes
2answers
246 views

How can I exclude nomenclature from the table of contents in amsart?

I would like to exclude nomenclature from the table of contents in amsart. \documentclass[15pt]{amsart} \usepackage{nomencl} \renewcommand{\nomname}{List of Notations} \makenomenclature ...
10
votes
1answer
136 views

Why the placement of \title makes a difference when using amsart with nag?

% !TeX program = pdfLaTeX \RequirePackage[l2tabu,orthodox]{nag} \documentclass{amsart} \begin{document} \title{The $n$-th term} \maketitle \end{document} If the \title command is placed after ...
1
vote
1answer
701 views

amsart maketitle problem

I am editing a paper using amsart documentclass. However, the \maketitle command does not give me the author and abstract. My codes are here: \documentclass[12pt]{amsart} ...
4
votes
1answer
133 views

How can I include an image in the title content achieved with \maketitle in the amsart class?

I am writing my thesis and using the amsart document class. On the first page I have used \maketitle, and have specified Title, Author and Abstract in the preamble, so these are produced. I would like ...
4
votes
1answer
146 views

How to change the appearance of the AMS Article title

I am writing a document with \documentclass{amsart}. How do you change the appearance of the title in a document like this? It is set to all caps, bold, and a certain size. I can change it to italics ...
4
votes
1answer
1k views

Author affiliations and date formatting

I am using amsart. But I do not want the author affiliations to be in small-caps which seems to be the default style in amsart. Instead I want them to be italics and 8pt. Also I want the date to be ...
5
votes
1answer
168 views

Equations in amsart crash into wrapfigs

In the example file below, using amsart and compiling using pdflatex, the equation crashes into the space reserved for the wrapfigure. If I use article instead of amsart, then the problem goes away ...
2
votes
1answer
369 views

Printing Glossaries in amsart using TexStudio

I am trying to make a glossary in an amsart document using TeXstudio but the glossary will not print. I've downloaded xindy, arara, and perl and have tried to use all of them, but to no avail. Any ...
4
votes
0answers
76 views

Break theorem style in amsart [duplicate]

I want to make a theorem's header stands in a separated line like (as style break in ntheorem) Examples 1 (1) GL(n) (2) SL(n) I copied the solution from Theorem formatting, but it doesn't work ...
4
votes
1answer
293 views

Using amsart, make running heads title of the current section?

Using the amsart document class, how can I replace all the running heads with the title of the current section? Is there a way to do this natively in the class, or am I looking at needing fancyhdr, or ...
6
votes
0answers
94 views

Include a paper in a dissertation [duplicate]

I'm start writing my dissertation and I want to include two papers that I wrote in the appendix. I want them to appear in the original format that they were written (amsart). I'm using a template ...
5
votes
1answer
191 views

Is there a proper way to use mathdesign fonts in amsart?

\documentclass{amsart} \usepackage[bitstream-charter]{mathdesign} gives Package mathdesign/mdbch Warning: Package 'amsfonts' shouldn't be used in conjonction with package mdbch Is there a ...
3
votes
2answers
2k views

How to make a short running author list?

I am writing a paper (using the amsart class) where we have four authors. The problem is that the author names on the even pages spill over onto the page numbers and obscure them. What I'd like to do ...
1
vote
0answers
94 views

flexisym incompatible with AMS classes since last expl3 update [closed]

It seems that since the last expl3 update (March 14, 2013), the flexisym package (used by breqn) is no longer compatible with the AMS document classes. Here is a minimal failing example: ...
6
votes
2answers
250 views

Beamer article mode + amsart freezes latex

If i try to get an article from my beamer slide using article mode and amsart style, my compiler (pdfLaTeX, LaTeX) gets stuck in an infinite loop: \documentclass{amsart} \usepackage{beamerarticle} ...
2
votes
2answers
659 views

Problems with bottom margin and alignment of text

1.) The space between the page number and the text margin is too small and I'd like to adjust it. Somebody recommended, the geometry package, e.g. \usepackage[ top = 2.75cm, bottom = 5.50cm, left ...
3
votes
1answer
411 views

Remove indent from table environment, and center-set the resulting table

How can I center my table if I'd like it to be ┬┤1.5\textwidth┬┤? \documentclass{amsart} \usepackage{graphicx} \usepackage{booktabs} \usepackage{ctable} \usepackage{tabularx} \usepackage{rotating} ...
4
votes
2answers
191 views

Omit specific subsection from table of contents?

Is it possible to omit a single specific subsection from the table of contents, while keeping it numbered as usual within the main body, and keeping other subsections listed? (I am using the amsart ...
1
vote
1answer
639 views

Making the entries of bordermatrix smaller

How do I make the entries in bordermatrix smaller? \documentclass[reqno]{amsart} \usepackage{amssymb} \usepackage{mathrsfs} \usepackage{amsmath} \usepackage{amsthm} \usepackage{stackrel} ...
7
votes
1answer
3k views

\section and \subsection alternating in the header

Right now, I'm trying to finalize the layout of my diploma thesis - unfortunately I cannot figure out how to achieve the heading I want. I'm using the amsart document class and try to achieve the ...
12
votes
1answer
3k views

Why is LaTeX replacing 2010 for the math subject classification with 1991?

I am trying to compile a .tex document and convert it to PDF where I used the command: \subjclass[2010]{***(primary), and ***(secondary)} (*** correspond to some suitable number from the subject ...
3
votes
2answers
1k views

How do I eliminate extra vertical space between the title and the first section heading?

When I use the amsart class with a lot of in-text figures, I find that the section headings do not stand out quite as much as I would like. Thus, I have taken to adding the following to my preamble, ...
5
votes
1answer
165 views

Error using amsart with algorithmic[x]

I use the algorithm and algorithmicx packages to type algorithms in a paper and my main document class is amsart. All is well until I try to use \listofalgorithms. This returns a variety of error ...
3
votes
1answer
2k views

\thanks command specific to each author

What is the correct way to have a \thanks command for a specific author ? I don't want to use \author{auth1 \and auth2} for obvious reasons (i.e. be able to distinguish the authors). I have tried ...
1
vote
1answer
169 views

underline in a part of a section title in amsart

I want to use math symbols including underline (e.g. $\underline{R}_{H,V}$) in a section title in a document in amsart documentclass with table of contents. So I typed (roughly) ...
4
votes
1answer
301 views

What is the font size of the references section in the amsart class?

Does anyone happen to know what the default fontsize of the references section in the amsart class is?
1
vote
1answer
1k views

Change the vertical spacing between “References” heading and bibliographic entries

I am using BibTeX with the amsart class. Is there a way to decrease the vertical spacing between the "References" section heading and the bibliographic entries?
5
votes
1answer
448 views

\date command - replacing “Date:” by something else

I'm using \documentclass{amsart}. In the tex file, before \maketitle I write \date{22th october 2012}, and then I obtain "Date: 22th october 2012." as a result. Using \date, I want it to print ...
4
votes
1answer
83 views

Problem with abstracts in the jams-l document class

I am preparing a submission to the Journal of the American Mathematical Society, and I'm using the jams-l document class. However, the abstract always appears after the body of my article text. Anyone ...
14
votes
3answers
3k views

Enumerate alignment problem in theorem environment

I'm using amsart. When I create an enumeration inside a theorem environment, the numbering is not aligned properly: Theorem 14. (1) (2) (3) (4) How do I shift the (2),(3),... to be aligned with ...
5
votes
1answer
573 views

Mimicking amsart's font sizes in the article class

I've been trying to customize the tableofcontents and sections to my own liking in the amsart class, but a lot (if not all) of the packages for either of these two functions are incompatible with ...
5
votes
1answer
7k views

Left aligned section title

I use a LaTeX template which center aligns all section titles. I want to left align these section titles but I do not know how. I tried \begin{flushleft} \section{\textbf{Introduction and ...
7
votes
2answers
1k views

Missing abstract with amsart class

I'm not very good at LaTeX but I've been using it to write my dissertation. Have just come to the end and trying to format everything correctly. Whenever I try to put my Abstract paragraph into the ...
5
votes
1answer
3k views

Removing brackets from the reference [duplicate]

Possible Duplicate: How to use 1. (number followed by dot) format instead of [1] format in bibliography I'm using the amsart class, and the command \begin{thebibliography} for references. ...
7
votes
1answer
646 views

How to boldface a section header? (including title and number)

I'm using class amsart, and I want to boldface each section's header. That is, the part \section{whatever} - it appears as, for instance, <3. Whatever> Now I wish to boldface the <3. Whatever> ...
3
votes
1answer
351 views

AMS article section headings in sans-serif

I want to produce an AMS article document using only a sans-serif font. The following almost achieves this: \documentclass{amsart} \renewcommand{\familydefault}{\sfdefault} ... However, section ...
6
votes
2answers
246 views

subsection vs Theorem

This a typographical/style question. Inside a subsection (after just one paragraph) I have some theorems (amsmath environment). The word Theorem looks stronger (bold, starting with a capital letter) ...
11
votes
4answers
7k views

Newlines after section headings in amsart

This latex code: \documentclass[9pt]{amsart} \begin{document} \subsubsection*{Animals} Rabbit horse monkey cow \end{document} Generates something that looks approximately like this: ...
10
votes
2answers
2k views

Abstract with light background color

Is there a way to add a background color to the abstract? I tried various combinations of \colorbox and the \begin{abstract} ... \end{abstract} environment, but nothing worked. I use the current ...