a document class provided by AMS, roughly equivalent to `book`, but conforming to AMS monograph style.

learn more… | top users | synonyms

5
votes
2answers
136 views

More economic and robust command for abstract at the beginning of chapters

I want to put an abstract at the beginning of each chapter. I have cooked up a command in that aim, but it looks neither economic, nor robust (sometimes it is shifted to the right). How to improve ...
4
votes
0answers
31 views

Amsbook \part error

In my tex file I have \documentclass[11pt]{amsbook} \usepackage{amsmath,caption,fancyhdr,multirow,booktabs,lscape,pbox} \usepackage{amssymb,nomencl,todonotes,framed,booktabs,graphicx} ...
4
votes
1answer
41 views

multiline equation inside \newglossaryentry

I want a multiline equation (preferably even centered w.r.t. the appropriate column, since single line equations I already have using [ and ] or $$ $$ aren't centered) in part of the description of ...
5
votes
2answers
90 views

Figure numbering in \chapter*

I am writing my thesis using the amsbook class, when I just discovered that the Figure numbering does not reset after introducing \chapter*. In particular, I have the following skeleton: ...
8
votes
1answer
46 views

Defining a chapter “outside” the last \part (amsbook)

Currently, I have the following: \documentclass{amsbook} \begin{document} \chapter*{Introduction} \part{First Part} \chapter{1} \chapter{2} \chapter{3} \part{Second Part} \chapter{4} \chapter{5} ...
4
votes
1answer
87 views

Changing the Look of Proof

I am using the document class amsbook. I had an issue with my theorems having a good deal of space between the statement of the theorem and the proof. I have a new theorem style: ...
7
votes
1answer
72 views

Problems with amsbook, lstdoc, and sections

The code \documentclass{amsbook} \usepackage{lstdoc} \begin{document} \chapter{Chapter} \section{Section} \end{document} produces the error messages Missing } inserted. [\section{Section}] and or ...
1
vote
1answer
48 views

Index sorting problem with Vietnamese

I use Texmker 4.1 and Texlive 2013 in my Xubuntu. I use this system to write my teacher's book with the AMS package (gsm in fact), which is in Vietnamese. There is a problem in sorting the index, it ...
4
votes
1answer
79 views

amsbook-class with small caps

Is it possible to tweak the amsbook-class such that the uppercase headings (e.g. Chapter 1) are changed to small caps? Are there any "typographical objections" in doing so?
6
votes
1answer
78 views

Changing the pdf pagesize for AMS package

I used AMS package with GSM option to write my professor's math book in LaTex. He want to customize the pdf pagesize to 16x24, it is the standard size for that style of book in my country, but I do ...
6
votes
2answers
85 views

table and caption distance

I am quite new to Latex, and I was wondering, if there is way to change the distance between the caption and the table. If you compile this example you can understand what I mean. ...
6
votes
2answers
68 views

Width of text in amsbook

I am writing my master thesis as amsbook and I am not quite satisfied with the width of my text. It is not wide enough. Does someone know whether you can change the width?
5
votes
1answer
111 views

AMSbook documentclass and exsheets problem

I think that there is a problem when you use task lists in amsbook class. Here is an example: \documentclass[12pt]{amsbook} \usepackage[load-headings, load-tasks]{exsheets} ...
3
votes
2answers
100 views

A problem with indexing (see also appearing instead of see)

Hello I would like to add some terms that mean the same thing in the index of my thesis. For example "vector space" and "linear space". I wish this to appear as "vector space, see linear space". I'm ...
2
votes
2answers
84 views

How do I stop indenting first paragraphs when using amsbook style? [duplicate]

I'm using amsbook style and I'd like first paragraphs to be not indented - what can I add to the header to do this? I don't want to use /noindent as then I'd have to use it all the way through my 200 ...
1
vote
1answer
39 views

Why does amsrefs do a pagebreak after the header? [duplicate]

I am using the document class amsbook and generate the amsrefs bibliography by \begin{bibdiv} \begin{biblist} \include{bibcode} \end{biblist} \end{bibdiv} Now, there is a page that only ...
3
votes
1answer
90 views

number width in predefined (amsbook?) list of figures too wide - self-defined lists okay

First of all, sorry for the long mwe - I wanted to include everything I use so that someone may see a potential clash. I based this off of the document class amsbook. I am also going to add a "List ...
0
votes
2answers
90 views

Class amsbook continuous section numbering [duplicate]

I am using amsbook. There, sections are numbered within chapters. For instance, if each of the first two chapters has 2 sections, then the sections are numbered as 1.1, 1.2, 2.1, 2.2. I wonder how ...
7
votes
2answers
214 views

TOC customization in amsbook

I am transcribing an old book in LaTeX, trying to preserve the style. I found the amsbook class to be the perfect solution for me. I produce chapters with \chapter{Thermodynamic Systems} and I get ...
6
votes
1answer
130 views

Suppressing the page number of chapters in TOC using amsbook

I want to suppress the page numbers of chapters in the TOC of my document. A wme: \documentclass{amsbook} \begin{document} \begin{titlepage} \begin{center} { \huge \bfseries A title} \end{center} ...
3
votes
1answer
58 views

Extending amsmath book structure with Volume (tomo)

I've tried to define a new Document section, called tomo ("volume" in English) at the upper level of the amsmath part document section like this: \documentclass[12pt,italian]{amsbook} ...
3
votes
3answers
410 views

How to hide a footnote in a section title from the table of contents

This is a question that arose in the comments here: Change Section titles to Small Caps only in ToC I normally hide footnotes from the TOC by doing this: \section[title]{title\footnote{This is a ...
1
vote
0answers
46 views

How do I get two different chapters with same number, and compatible references (using hyperref)? [duplicate]

I'd be glad if somebody can help me resolving the following issue. Basically, hyperref is confused by my code. I want the following document structure. Chapter 1 Chapter 2 Solutions to Exercises ...
0
votes
1answer
92 views

How can I center align subsection heading in an AMSBOOK document

In an amsbook based document A subsection heading seems to be left aligned with some indentation in the beginning. Chapter and section headings are center aligned. How can I make subsections also ...
5
votes
1answer
92 views

Avoiding pdfbookmark with amsbook

I am using the amsbook class. I want a subsection with a title different from the ToC entry as in the example below \documentclass{amsbook} \usepackage{hyperref} ...
3
votes
1answer
105 views

Question relate to Table of Contents

I want to use the \mathsection in the chapter content, as I said and Gonzalo Medina figured out for me in Using \mathsection in the chapter. However, when I use his solution, the Table of Contents ...
1
vote
1answer
269 views

Question on top margin in chapter page

In my LaTeX template, there is a page contained the chapter part that is too far from top of the page like the following: My LaTeX file uses amsbook: \documentclass[11pt,a4paper]{amsbook}. This ...
0
votes
1answer
635 views

Bibliography appears as an appendix in ToC in LyX

I want to place the Bibliography after the appendices. So in LyX I mark "Start Appendix Here", insert the appendices, and after that the Bibliography. Now, all appendices appear in the Table of ...
2
votes
2answers
356 views

Problems Customizing TOC in amsbook style

I am attempting to create a table of contents (in the amsbook document class) with a specific format; however, after several attempts I can't seem to get it to work out. The document will include ...
0
votes
0answers
47 views

How do I change the header of table of contents with amsbook style file? [duplicate]

Possible Duplicate: Using the amsbook Class I am trying to change the header in the table of contents page with amsbook style file. I tried: \makepagestyle{calification} ...
4
votes
1answer
303 views

Remove “Chapter” prefix from ToC in amsbook class

I am struggling to make a small change to the Table of Contents of my amsbook document in LyX. Basically, I just want to change the ToC to say 1. Something instead of Chapter 1. Something as ...
6
votes
2answers
1k views

Deleting blank page after title page

Using amsbook, I get a blank white page after the title page and before the TOC. Any way to delete this page? Many thanks. Here is a MWE, for what it's worth: \documentclass[openany]{amsbook} ...
7
votes
2answers
345 views

Not having “Chapter” appear in chapter names

If, in amsbook, I write something like \chapter{My great chapter} it appears in the text as Chapter 1. My great chapter I would like to make it appear simply as 1. My great chapter Anyone have ...
4
votes
2answers
128 views

subtle issue when changing font style of the toc in connection with the header of the page

I am using the amsbook class and changed the font style of the title of the table of contents (toc) with the command \renewcommand{\contentsname}{\textbf{\textsf{Contents}}} So I want it in \sf ...
3
votes
1answer
196 views

A part with sections and subsections but without chapters in ToC

My document consists of three parts. Parts 1 and 3 contain chapters and sections. Part 2 however is a bound in research paper, and as such only contains sections and subsections, however no chapters. ...
5
votes
1answer
248 views

How can I fix the following problem with subsection alignment in table of contents?

I am trying to set the depth of the table of contents. I used \setcounter{tocdepth}{2} This actually works fine, almost. The table of contents is showing subsections as well, but these are not ...
5
votes
1answer
680 views

\wideparen in AMS class

I need a \wideparen symbol in a book prepared with amsbook class. I know about a few packages providing this command but... ymath does not work with current version of AMS classes MnSymbol, mathabx, ...
5
votes
1answer
165 views

amsbook with multiple page glossary

I'm not sure if the protocol is to edit my previous post amsart/amsbook with non-default glossary style to add this question, but it is certainly related. There seems to be another conflict between ...
2
votes
1answer
194 views

amsart/amsbook with non-default glossary style

I am using amsbook with the glossaries package. The following MWE produces a glossary in which the single entry is completely squashed up in the middle; it looks like no space at all has been ...
6
votes
1answer
400 views

amsbook theorem numbering

I want theorems to be labeled of the form Part.Chapter.Section.number so I tried \renewcommand{\thesection}{\Roman{part}.\thechapter.\arabic{section}} \newtheorem{book}{Theorem}[section] ...
4
votes
1answer
423 views

todonotes problem with amsbook class

I'm trying to use todonotes with amsbook documentclass. I can add a todo (using \todo{fix this}) to part of the text and I can generate a Todo list for the table of contents using \todototoc, but the ...
4
votes
1answer
314 views

Bold small-caps header of theorems in amsbook

I'm using amsbook with amsthm. It seems that amsbook customized the theorem environment so that the theorem name (eg Theorem 1) is written in big caps and small caps, which is fine for me. But I want ...
2
votes
1answer
293 views

Environment for writing solutions in amsbook

Basically, what I want is exactly asked in Showing Solutions of the Questions "separately", except that I'm using amsbook. So, I want to write a series of questions, by writing something ...
3
votes
2answers
171 views

Alignment of equation numbering in amsbook

I use \documentclass{amsbook}. When I add an equation within an enumeration, the equation number appears further to the left than the item number, which is not so pleasant. How to make the equation ...
6
votes
1answer
1k views

Error with \tableofcontents, after switching from report documentclass to amsbook and back again

I changed my documentclass from report to amsbook (from AMSLaTeX) and everything was fine. Then I decided to change it back to the report document class, but it will not compile. In order for it to ...
3
votes
2answers
663 views

Page headers in uppercase (amsbook+chapterbib+natbib)

I have the following problem which has been driving me crazy for quite some time now. Using the amsbook class for whatever you are intending to use it for, in the end you will end up having your page ...
5
votes
1answer
116 views

amslatex plus endnotes

I have a document that uses \usepackage{endnotes}. When the document class is book it works fine but when the document class is amsbook, I exceed TeX capacity with stack_size, save_size and param_size ...
2
votes
3answers
3k views

Using the amsbook Class

I am trying to figure out how to tweak various stylistic aspects of the amsbook class. For example, I would like for the chapter and section headers to be left-aligned instead of centered. Also, using ...
5
votes
2answers
636 views

Unindented proof in amsbook

I am using the proof environment in amsbook. Unlike amsart, the proof is automatically indented. Is there a way of cancelling the indentation? \documentclass{amsbook} \begin{document} \noindent This ...
4
votes
1answer
2k views

Forcing new chapter not to start on an odd page [duplicate]

Possible Duplicate: Chapter on the right side - How to turn it off? I am using a document class amsbook which I like very much, except for one thing: each new chapter starts on an ...