4
votes
1answer
47 views

Adjusting the size of round parenthesis in an equation

I am not sure what is the common rule in adjusting parenthesis in equations. Let me illustrate my question by the following example \documentclass{article} \usepackage[T1]{fontenc} ...
7
votes
2answers
97 views

Defining new split environment with reduced spacing

this is my first stackexchange question so apologies for any bad etiquette. I'm writing a document in double spacing. I don't wants the gaps between the lines of a multi-line equation to be that ...
6
votes
2answers
106 views

Align equations over multiple sections

Is there a way to make the math mode "align" work over multiple sections? Here is the code example: section*{Polynomials} Do the following polynomial devisions \begin{align} &(x^7 - x^4 - 21x^2 + ...
3
votes
2answers
50 views

break an long line in an algorithm

I have a long line in an algorithm and want to break it into two lines. For similar case in equations, split can be used. How do I do this within an algorithm? \documentclass{article} ...
3
votes
4answers
80 views

How can I change the font of all equations?

I'd like to change my default font style in all equations of one document, not just single equation. I guess I am using \usepackage[utf8]{inputenc} and \usepackage{amsmath}, which may be related to ...
7
votes
1answer
52 views

Switch between leqno and reqno options (of amsmath) in the same document

I'd like to know if it is possible switch between the leqno and reqno options in the same document keeping the numbering of the equations. Namely i use the reqno option (default for amsmath and the ...
5
votes
2answers
100 views

How can I DeclareMathOperator* with spacing after it, preserving the alignment?

In the context of optimization problems, I'm using \usepackage{amsmath} \DeclareMathOperator*{\minimize}{\text{minimize}} \DeclareMathOperator*{\subjto}{\text{subject to}} to declare some operators ...
0
votes
2answers
23 views

How can I position the tag of a “nested” aligned environment?

I have an equation that is two wide to fit on a single line, but it has \left(-\right) split over two lines, and I can't align to something inside these for some reason... The wanted output is ...
4
votes
1answer
56 views

How to make equations the same size

When I write an equation using the simple \[ and \], it comes out to the correct size, with the fractions bulging above and below the lines and the parentheses surrounding them. But when I use the ...
3
votes
1answer
57 views

How to align terms in alignat: too much spaces and too few

Please, help me this code has too much spaces and too few, how can I fix it? \begin{subequations} \begin{alignat}{2} \forall i \in[m] && \sum \limits_{e \in N_{out(s_{i})}} y(i,e) - \sum ...
6
votes
2answers
111 views

What's the difference between split and aligned?

I don't understand the difference between the split and aligned environments introduced by amsmath, so I'm posting this question as a place to collect what subtle details there may be. One thing ...
5
votes
2answers
715 views

Big forward slash in math

I have a equation in from of a=VERYBIGSTUFF / VERYBIGSTUFF And I would like to have a "verybig" forward slash in the middle of them. I dont like \frac mode, as I would like to have them ...
2
votes
3answers
97 views

Aligning a set of equations with one equation number

The following set of equations cannot be aligned from left to right. Since, I need to index them just with one number, I had to use split equations: \begin{equation} \begin{split} X={}^ 2 \bar{x} + ...
2
votes
3answers
144 views

\middle too big

I'm trying to typeset an equation that contains a "|": \begin{align*} \lambda_{l} = \lim_{q \to 0^{+}}P\left(X_{2} \leq F_{2}^{(-1)}(q) \middle| X_{1} \leq F_{1}^{(-1)}(q) \right) \end{align*} ...
2
votes
0answers
30 views

Multiple tags in one line of align environment [duplicate]

Is there a possibility to tag each equation of a single line in an align environment of the amsmath package? Like so (this code leads to the error Package amsmath Error: Multiple \tag.): ...
2
votes
1answer
56 views

How to centre an equation

When I build and view my equation it is always aligned right \begin{equation} $$\textit{N}(\textit{t}) = $\frac{P_o}{\lambda+\rho\varepsilon/\Lambda}$[1-e$^{-t(\lambda+\rho\varepsilon/\Lambda}$)]$$ ...
8
votes
2answers
301 views

Boxed equation with number

My minimum working example: \documentclass{report} \usepackage{amsmath} \begin{document} \begin{center} \boxed{K_{k+1}=P_ka_{k+1}^T(a_{k+1}P_ka_{k+1}^T+I_N)^{-1}} \end{center} \end{document} ...
2
votes
1answer
79 views

Equation + explanation below

I have to write an explanation to my equation, and I would like to do it, below the equation. But, I do not know how to do that. It should look like this: My preamble look like this: ...
6
votes
6answers
549 views

please help me fit my equation into my margins!

I have this equation. It is quite wide, and I've had to split things over two lines. However, the part to the left of the = is quite long, and it's causing me some issues. I've posted a MWE here. ...
3
votes
2answers
42 views

Mini-alignment of a single equation?

So I have this problem, whereupon I would like to do some 'mini-alignment'. I have googled for ways to do this, but I get results based on aligning whole equations. Here is my current output: What ...
2
votes
0answers
43 views

“latex missing } inserted” error message in equation [closed]

I have a slightly complex, long section of equations in my latex document, but from what I can see I think it is programmed correctly. When I compile the document, I get the error ...
5
votes
2answers
151 views

Add equation name besides equation number (so that \eqref inserts only the number)

I am trying to add equation names besides the equation numbers but, in addition, in such a way that \eqref inserts just the number. Inspired by the top answer in Add equation name underneath equation ...
2
votes
0answers
15 views

Error using split within an equation [duplicate]

I am getting multiple errors for using split within an equation. I use this command in a number of other places throughout my LaTeX document, but there is one case in which many errors are given ...
2
votes
1answer
49 views

Are the \[ and \begin{equation} used interchangeably?

When I use double dollar signs $$ or \[ and \] to begin and end math mode I have no problem compiling the file. When I substitute them with \begin{equation} and \end{equation} correspondingly I get an ...
1
vote
1answer
97 views

Force equation number to be right aligned

I'm trying to typeset some basic equations with proper numbering. I simply want a single equation to have a right aligned number in the two column environment that I'm using. I tried three approaches, ...
6
votes
1answer
113 views

How can I split and align this series of equations?

I know this is an issue that comes up frequently, but I keep running into issues using all the suggested examples (breqn, amsmath; split, align, etc). Here's what I have: ...
4
votes
3answers
74 views

How can I make a single-aligned row under two double-aligned rows in an equation?

I have an equation that I would like to align like this (the x is actually \times): A = BBBBB CCCCCCC x DDDDD = EEEEEEE FFFFF I have tried the align environment, align with nested ...
3
votes
1answer
86 views

Vertically aligned equation number with underbrace

I would like to vertically aling an equation number for the following MWE: \documentclass{scrartcl} \usepackage{amsmath} \usepackage{mathtools} \begin{document} \begin{align} \begin{aligned} a ...
9
votes
2answers
260 views

Cleveref: Parentheses around references to subequations using \labelcref

Using the Cleveref package (v0.19) i have a problem with missing parentheses when referencing to subequations, using the \labelcref command. Here is a MWE: \documentclass{article} ...
1
vote
1answer
129 views

Why isn't eqref working?

I am trying to use \eqref as in the following, but instead of (1), I get a set of blank parentheses as the result. Could anyone help me fix the problem? \documentclass[10pt]{article} ...
12
votes
3answers
371 views

Displaymath environment that can align equations and squeezes math

I have a long equation to align. Without squeezing the math, it is just barely longer than \textwidth. However, the align environment doesn't squeeze the math at all, which results in a badbox. ...
7
votes
1answer
118 views

problem on the parentheses direction in equations

I recently installed a MacTex version and I faced a problem with the direction of parentheses both in the enumeration and the text reference using \eqref. I use XeLaTeX to compile the tex files. Since ...
9
votes
3answers
590 views

To write this norm equation better?

I have this norm \documentclass{article} \usepackage{amsmath} \begin{document} \begin{equation} \lVert f \rVert_{L_{2}(\Omega)} = \text{sup}_{ \begin{cases} v \in L_{2}(\Omega) \\ v \not= 0 ...
5
votes
2answers
99 views

How to create a math environment with one row on one side, and two on the other?

I have the following math equations: \begin{align*} &\mathcal{H} = \mathcal{H}^{(0)} + \mathcal{H}^{(1)} \\ &\mathcal{H}^{(0)} = -\frac{\hbar^2}{2m}(\nabla_{1}^{2} + \nabla_{2}^{2}) - ...
1
vote
1answer
122 views

IEEEeqnarray: \tag-like command?

Is there a IEEEtrantools command equivalent to amsmath's \tag? Example: Consider the well-known functor laws: \begin{IEEEeqnarray}{rCl} F(f \circ g) &=& F(f) \circ F(g) \tag{Fu1} \\ F(id) ...
2
votes
1answer
64 views

How to combine thmmarks with addtag for \[\]?

I have the problem, that I have quite a few equations in my text. As I am oftenly unsure if I will need them later as a reference, I searched for a way to avoid exchanging \[...\] with and equation ...
3
votes
1answer
372 views

Equation reference undefined when using \cref and package{amsmath}

When I attempt to reference an equation using \cref{..} while also using the package amsmath the references appear as ?? in the outputted pdf. For example \documentclass[]{article} ...
5
votes
1answer
252 views

Changing the vertical alignment of `multlined` from the mathtools package

Package mathtools provides the vertical alignments top, center, and bottom: \documentclass{report} \usepackage{amsmath} \usepackage{mathtools} \begin{document} \makeatletter ...
6
votes
1answer
255 views

alignment of equations in align environment with itemize

I am using amsmath environment and I want to align equations with multiple align environment. An example can be seen in the figure: Now what i want is shown in arrows. I want i=0,..2n in eq 2.4.2 to ...
9
votes
4answers
345 views

Highlighting equation with arrow

I want to create an equation with highlighting as shown bellow. But using following code: \documentclass[10pt,a4paper]{article} \usepackage[utf8]{inputenc} \usepackage{amsmath} ...
2
votes
1answer
61 views

Equations alignment in Split enviornment

\documentclass[12 pt]{article} \usepackage{graphicx,epsfig,setspace,subfig,url,amsmath} \usepackage{setspace} \usepackage{indentfirst} \usepackage{listings} \usepackage{array} \usepackage{multirow} ...
11
votes
2answers
246 views

Equation number enclosing parentheses misplaced with Polyglossia+Hebrew+amsmath

I am compiling the following MWE using XeLatex within TeXnicCenter and get a garbled equation number: \documentclass{article} \usepackage{amsmath} \usepackage{polyglossia} \setmainlanguage{hebrew} ...
3
votes
3answers
89 views

Aligning the right hand side of multiline equations

I would like to align the RHS of the multiline equations and assign equation number for whole as one. \begin{multline*} \frac{\partial P(y_{i}\succ0)} {\partial z_{ij}}=\tfrac ...
1
vote
1answer
97 views

Very wide equation ruins consecutive side edges

I've just created a set of equations in matrix form which looks fine. It also seems to fit in the space of my document, but in the following space after the equation, the side edge is suddenly gone, ...
0
votes
0answers
33 views

Remove extra space to the left of aligned environment [duplicate]

To typeset a collection of equations with alignment, I am using align* from amsmath. Some of these equations have right-hand sides that have multiple lines that should be indented. So far I am using ...
5
votes
3answers
146 views

alignat inside align enviroment?

Why can't I nest an alignat environment in an align environment? \begin{equation} \label{eq:115} \left\{ \begin{aligned} \begin{alignat*}{2} ...
8
votes
1answer
153 views

How to increase the vertical space surrounding mathematical equations?

How can I, in a systematic way, increase the vertical space surrounding mathematical equations? \documentclass{article} \RequirePackage[ansinew]{inputenc} \usepackage{amsmath} \begin{document} Ah, ...
17
votes
3answers
2k views

Guidelines for typesetting fractions

I realize that this question is to some extent subjective. However, I suspect that there are some common standards regarding how fractions ought to be typeset in mathematics. The guide Mathematical ...
4
votes
1answer
88 views

Spacing within equation

I've got the following equation: \begin{align*} y_{i} &= f(x_{i}) + \epsilon_{i} \nonumber \\ &\approx \underbrace{f(x_{0})}_\text{=$\beta_{0}$} + ...
4
votes
1answer
397 views

How to place the QED symbol at the end of equation using IEEEproof environment?

I was wondering how one can place the QED symbol at the end of an equation when using the IEEEproof environment? With the standard proof environment of amsthm this is done by simply placing \qedhere ...