A package that facilitates the kind of theorem setup typically needed in American Mathematical Society publications. The package offers the theorem setup of the AMS document classes (amsart, amsbook, etc.) encapsulated in LaTeX package form so that it can be used with other document classes.

learn more… | top users | synonyms

49
votes
8answers
11k views

How do I repeat a theorem number?

Often in my papers I want to mention theorems in the introduction that are introduced in more detail and proved in a later section. I'd like to include the statement of these theorems twice over, ...
9
votes
2answers
4k views

How do I get rid of particular pdftex warning message?

Here is a minimal example that showcases my problem: \documentclass{article} \usepackage{amsthm} \usepackage{hyperref} \usepackage{cleveref} \newtheorem{thm}{Theorem} \newtheorem{lem}[thm]{Lemma} ...
15
votes
3answers
10k views

How to change the way theorems are displayed?

I am in the process of writing a large document containing some theorems, lemma, and propositions. Currently, I am using packages amsmath and amsthm. I defined my own environment for theorems by ...
27
votes
1answer
5k views

Problem with qedhere

In a paper I'm writing, I end a proof with a displayed equation that has some cases in it. The relevant code looks something like the following: \[f(x) = \begin{cases} 2x & \text{if $x<0$}\ ...
22
votes
4answers
5k views

How to make the optional title of a theorem bold with amsthm?

I use the code mentioned in Title of the theorem: \begin{theorem}[The title] Some statement \end{theorem} However with amsthm the optional title -- above: "The title" -- is neither bold nor italic, ...
8
votes
1answer
782 views

hide proof environment for restructuring

I am writing my thesis, and i am in restructuring phase - sorting theorems where they should belong thematically. And it would be helpful to have all the proofs hidden so i am not laden with the ...
3
votes
1answer
62 views

How to change theorem numbering when macro file is involved

In my macro file, I have certain theorem environments defined, for example. \newtheorem{theorem}{Theorem} \newtheorem{lemma}[theorem]{Lemma} \newtheorem{corollary}[theorem]{Corollary} ...
8
votes
2answers
457 views

amsthm with shared counters messes up autoref references

When I define amsthm theorem environments with shared counters, autoref messes up the names of the references. For example, in the output below, we should have "Definition 2" instead of "Theorem 2". ...
7
votes
1answer
1k views

Shaded theorems (thmtools) spanning pages

When the thmtools package is used to create theorem environments with a shaded background, it does not allow separate theorems to span more than one page. This is a rather severe problem if the ...
7
votes
3answers
508 views

What’s the most straightforward way to typeset theorems etc. when the numbering is entirely manual?

I’m using LaTeX to typeset some homework, and since we’re assigned problems scattered throughout our textbook I have to enter the problem number for each problem I typeset. I’d like these problems to ...
3
votes
1answer
499 views

Theorem style with name as argument

Is there some way to get a theorem type which will make a theorem with the name passed as a parameter? In other words, is there a way to define "named" such that \begin{named}[NAME] text \end{named} ...
7
votes
1answer
7k views

pdfTeX warning: destination with same identifier has been already used, duplicate ignored (weird behavior)

Here is a minimal example: \documentclass{amsart} \usepackage{amsthm} \usepackage[pdftex]{hyperref} \newtheoremstyle{myexercise}{\baselineskip}{\baselineskip}{}{}{\bfseries}{.}{ ...
11
votes
2answers
7k views

amsthm: \newtheoremstyle, headspace, \mbox{}, and lists

Q: How do I define a newtheoremstyle which will start the theorem text on a newline after the header even when the theorem text starts with a list, e.g., enumerate? If there's no way of doing this, ...
5
votes
2answers
7k views

Example/Solution Environment

In my document I wish to provide example questions with solutions. I am currently doing this using the amsthm package as follows: \documentclass{article} \usepackage{lmodern} ...
8
votes
2answers
2k views

Wrong spacing before theorem environment (amsthm)

I am using the amsthm package to have environment. I also use \usepackage[onehalfspacing]{setspace} to have 1.5 line spacing. However, when I use the the theorem environment, the spacing before is ...
20
votes
5answers
14k views

Changing style of Proof

I'm using the \begin{proof} of the amsthm package. And I want to change the style of the Proof word that is added in the beginning. By default it is italic, I want to make it bold. How can I do it?
9
votes
3answers
418 views

I want the QED symbol to be 1 line lower at the end of proof

Just as my title says, I would prefer to have my qed symbol to be 1 line lower than the last line of my proof. By default its on the same line and aligned to the right. How can I achieve this? ...
10
votes
2answers
193 views

Continuance of environment

I am using an continuous example in my text, but I don't know how to do define the corresponding nice environment. I am using the amsmath and ntheorem package and defined my own example-environment: ...
6
votes
3answers
2k views

How to remove brackets from the optional title in amsthm?

This is a follow-up question of this question. when using \begin{theorem}[Open mapping]...\end{theorem}, I received Is it possible to change the format into "Theorem: Open Mapping."(boldface)? ...
5
votes
1answer
141 views

Only show \NAME in \listoftheorems

I am using the thmtools package, and I want to modify \listoftheorems to only print the name of the theorem. For example, my document might look something like the one shown below. When I compile this ...
5
votes
2answers
1k views

`ntheorem` and `thmtools` seem incompatible

I am preparing the setup of the theorem environments for my thesis. I want to do this right before I have say 200 of those environments in my document, since changing them will likely break things at ...
13
votes
1answer
4k views

Including end mark in definitions and examples (using amsthm)

I am using the amsthm package, and I have this in the preamble: \theoremstyle{definition} \newtheorem{definition}{Definition}[chapter] \newtheorem{example}[definition]{Example} \theoremstyle{plain} ...
11
votes
1answer
338 views

Is there an “endproof” package?

You may be familiar with the endfloat package, which moves all figures and tables to the end of your document. Is there a similar package for achieving that kind of results with proof environments ...
10
votes
3answers
4k views

Proof environment - line break after the “Proof.”

I want to make the proof environment in amsthm package to auto add a line break right after the "Proof." I tried the following code, which also removed the QED sign, but it doesn't work: No linebreak ...
6
votes
1answer
2k views

How can I change the spacing before theorems with amsthm?

I have a spacing problem. Whenever I include a theorem environment, \begin{theorem}\end{theorem}, the theorem appears very close to the previous line. The spacing is much less than the normal spacing ...
14
votes
3answers
994 views

Cleveref and named theorems

Is it possible with Cleverref to reference not only the number of an environment but the "name" (the thing that is passed to it in square brackets? In the following example I want to replace the line ...
12
votes
1answer
4k views

How to change the word “Proof” in the proof environment?

I want to change the word "Proof" into "Solution". Of course the following works. \begin{proof}[Solution] \end{proof} But it's quite cumbersome to add this additional [Solution] every time. Is ...
12
votes
3answers
2k views

Theorem name and number in margin, note in text

I'm using thmtools to make ultra-fancy theorems. I would like the Theorem name and number (e.g., "Theorem 1") to jut out into the left margin of the text, and the note (e.g., "The Fundamental Theorem ...
8
votes
3answers
3k views

A theoremstyle with complete indentation using amsthm

I want to define a theoremstyle using amsthm, such that the complete environments content produced by \newtheorem with this style are indented. The following standalone example uses an adapted ...
6
votes
1answer
659 views

Parts numbering in Proofs

I am using proof environment from amsthm to type proofs. Some proofs are long, so it would be nice to split them into numbered parts. I have defined new theorem environment called proofpart for that ...
1
vote
1answer
222 views

Alternative numbering for theorem

I am using thmtools as a front end to amsthm and I have a definition environment as follows. \declaretheorem[ style=mydefinitionstyle, name=Definition, numberwithin=chapter ]{definition} ...
12
votes
6answers
5k views

How to remove the “.” in the proof environment?

Using amsthm, is there a possibility to remove the dot when typing \begin{proof}...\end{proof}? This would be typeset as "Proof." If you change your proofname \begin{proof}[Proof:]...\end{proof} you ...
10
votes
1answer
190 views

Numbering theorems in the left margin

My question is similar to this and this. I would like to have the theorem number in the left margin (0.6em spacing to the main text) and the Name 'Theorem' should be justified to the main text. The ...
9
votes
2answers
1k views

QED symbol on the same page as proof

I'm using the proof environment from the amsthm package. In some cases, the last line of a proof falls at the end of a page, but the QED symbol (the little white box) ends up on the following page. ...
5
votes
1answer
196 views

Using amsthm to number examples - how do I account for altered examples (i.e. 1', 1'', etc.)

I have sought long and hard for a solution to this and experimented with a combination of http://tex.stackexchange.com/a/43351 and http://tex.stackexchange.com/a/443, but could not get it to work. I ...
4
votes
1answer
299 views

Titlesec, runin shape and amsthm

I'm trying to have an old fashioned style of (sub)section numbering as in EGA (Eléments de Géométrie Algébrique, by A.Grothendieck and J.Dieudonné). For a LaTeX written example, see here. I did it ...
4
votes
1answer
104 views

Making a theorem into a link

A link to another file can be created using the code \href{run:/path/to/my/file.ext}{text displayed} Now I'm use the amsthm package. What I'd like is for the phrase 'Theorem X' to be a link to ...
4
votes
1answer
177 views

How can I define a new environment which limits the scope of \newtheorem commands?

I am attempting to make an environment out of the command given in one of the answers to this question: Customizing theorem name. \documentclass{article} \usepackage{amsmath} \usepackage{amsthm} ...
4
votes
1answer
572 views

Horizontal spacing issue in \listoftheorems using amsthm + thmtools

I am using the command \listoftheorems with packages amsthm and thmtools. The problem is that the theorem's head and its optional title overlap. How can I make this space bigger to avoid overlapping? ...
4
votes
1answer
405 views

Reindexing Theorem Numbers

The amsthm package comes with an several theorem-like environments. Is there a way to adjust the indexing on a sequence of theorems to skip a number? That is, I would like to have it do something like ...
3
votes
1answer
140 views

Preventing the “end square” of proof environment to be alone on a newpage after an enumeration

I have something like (with the packages amsthm and document class book): \begin{proof} blabla \begin{itemize} \item blabla \item blabla \end{itemize} \end{proof} The problem is, that ...
3
votes
1answer
157 views

Line break in list in indented theorem

I'm trying to make an indented theorem environment as in A theoremstyle with complete indentation using amsthm. Here's a minimal (non-)working example: \documentclass{article} \usepackage{amsthm} ...
2
votes
2answers
113 views

An error I get trying to number tables consecutively with theorems

egreg kindly answered my (previously-asked) question about giving numbers the same numbering as theorems here: Numbering tables sequentially. Unfortunately, this very good solution seems to be ...
2
votes
2answers
1k views

Theorem formatting: strange interaction with itemize

This question is related to this one. I want to have theorem headers alone on a line like this: Theorem 1. some text... In the amsthm documentation, they suggest doing this: ...
11
votes
2answers
2k views

Italic in theorem environment

Consider the following theorem: \begin{theorem} If $x=0$, then $xy$ is equal to 0. \end{theorem} The first "0" will be typeset in upright typeface and the second one in italic. Including amsthm ...
9
votes
1answer
1k views

Duplicating the amsthm proof environment

I am currently writing up some lecture notes and would like to have therefore a "\solution" environment which should work basically as the amsthm \proof environment, just writing "Solution." instead ...
7
votes
1answer
177 views

Creating an example environment structured exactly like amsthm's proof environment

I want to create an environment for examples that is structured exactly like the \begin{proof}...\end{proof} environment, i.e. starting with an italic "Example.", continuing in the same line and ...
7
votes
1answer
739 views

amsthm: Theorems, Lemmas numbered backwards

What I want \newtheorem{thm}{Theorem} \begin{thm} A \end{thm} \begin{thm} B \end{thm} \begin{thm} C \end{thm} Ends up generating Theorem 1 A. Theorem 2 B. Theorem 3 C. What I want instead: ...
7
votes
3answers
2k views

amsthm environment and colorbox

I'd like to customize the amsthm command a little bit but I cannot find the relevant lines in the (undocumented?) .sty. How can I put a colorbox on the name of the environment ...
6
votes
2answers
1k views

Creating list of for \newtheoremstyle

I want to create an list of theorems much like the list of figures, but couldn't find a packacke or tutorial to solve my problem. I tried this http://texblog.org/2008/07/13/define-your-own-list-of/ ...