{arrows} is about drawing arrows, usually in {math-mode} or inside {diagrams}.

learn more… | top users | synonyms (1)

5
votes
2answers
199 views

How to use arrow instead of underbrace?

In the following example instead of \underbrace, I want to use something like \text bar\leftarrow j+1\rightarrow\textbar. (p_{1},p_{2}\ldots,p_{m-j},\underbrace{m,m,\dots,m}_{j+1}) Is there any ...
6
votes
3answers
273 views

Circles at the ends of arrows

Consider four kinds of "arrow" symbols: 0. A horizontal line 1. A leftarrow 2. A rightarrow 3. A doublearrow I'd like to add circles to each end of these arrows, allowing for all possible ...
5
votes
1answer
265 views

Pointing (an arrow) to a tabular node in beamer is buggy (ignorenonframetext)

Maybe a bug in beamer, works OK while using the minimal document class. Again, following the example over there, and also after playing with Circling/framing and referring to a bunch of nodes, the ...
11
votes
2answers
5k views

\xRightarrow (text)

I know it's possible to have \xrightarrow (text), but if I try to do \xRightarrow (text) I get an error each time. Does anybody know if it's a syntax error or if there is a other way to produce the ...
3
votes
1answer
262 views

parallel arrows in pb-diagram

It is possible to get two parallel maps (one pointing to the left, the other to the right) between two nodes using pb-diagram? I know it can be done with TikZ, and maybe with some other package, but I ...
6
votes
3answers
2k views

List with arrows instead of bullets

I want a bullet list with arrows instead of bullets, like: => Line 1 => Line 2 I tried this, but it returned some error: \begin{itemize}{labelitemi}{$\Rightarrow$}[leftmargin=1em] \item ...
2
votes
1answer
133 views

esvect with transparency makes part of the arrow darker

When using the esvect package in a transparency context, one can see that the arrow is built by superposing two "blocks": a line and an arrowhead. But as the line overrides the arrow head, the center ...
4
votes
1answer
602 views

PgfPlot: Axis Arrows vs Vector Arrows

I've notice that the arrowheads on the axis are different than the arrowheads drawn when drawing vectors: \documentclass{article} \usepackage{pgfplots}\pgfplotsset{compat=1.7} \begin{document} ...
20
votes
3answers
3k views

Fancy arrows with TikZ

I would like to draw an arrow like this using TikZ: This is taken from Workflow diagram. I didn't succeed in reproducing the arrow; is somewhat beyond my (extremely limited) TikZ abilities. I don't ...
6
votes
1answer
281 views

Extensible double lined, squiggle arrow

I would need an arrow (for math mode) with the following characteristics: squiggle (like \rightsquigarrow) double lined (like \xRightarrow) extendible (like \xRightarrow) Currently, I am using ...
9
votes
2answers
268 views

How can I modify arrows to complement this drawing?

Following the answer to this question, I'm now at a point where I have very unsatisfying looking arrows. If I use the double option in the \draw command the spacing is too small, and when I ...
7
votes
2answers
358 views

TikZ: Precisely controlling arrow tip position

Usually, when drawing a path with an arrow tip in TikZ, we want the tip to end precisely at the last point of the path, and this is what TikZ does by default. However, with some specific arrow tips, ...
7
votes
2answers
298 views

Odd behaviour with arrows and multipart rectangles

I recently posted a question Display issues drawing DNA sequences with TikZ. The issues I described were for the most part resolved, but one remains. I managed to simplify my example down to show the ...
5
votes
1answer
140 views

redeclare an arrow in TikZ

As you know, I'm adding more arrows to the code in this answer (maybe tomorrow). At this point, I'd like to overwrite the arrows declarations so that one can simply write -latex instead of -latex new, ...
5
votes
0answers
135 views

How to draw a split arrow [duplicate]

Possible Duplicate: How to draw a Sankey Diagram using TikZ I want to have an arrow which splits up and one end is pointing then downwards. When you compile the code below you should see my ...
11
votes
1answer
2k views

Is there a left-handed equivalent of \implies?

I’m aware of and use the \implies and \iff commands to denote right-handed implication and if and only if (so A=>B and A<=>B). I’ve been looking for a similar command for left-handed implication ...
9
votes
1answer
282 views

Drawing multiple arrows at arbitrary angles in a common direction, with overlap

I am trying to draw a diagram with tikz that has multiple arrows (here I have 4) between nodes, where the nodes are placed arbitrarily in a diagram. My best (that is, shortest and easiest to ...
5
votes
1answer
239 views

Adding arrow to one tree node and presenting tree in a step-wise fashion

I have the following MWE %http://www.texample.net/tikz/examples/probability-tree/ \documentclass{article} \usepackage[latin1]{inputenc} \usepackage{tikz} \usetikzlibrary{trees,arrows} ...
4
votes
1answer
440 views

Commonly used arrows with TikZ

In a previous question Gonzalo Medina and Peter Grill gave a solution to replace the \to arrow by an arrow generated by TikZ. For some people using TikZ in commutative diagrams, it would be perhaps ...
7
votes
1answer
224 views

TikZ arrows pointing only to the superscript exponent

Here's what I've got at the moment: \begin{frame} \frametitle{Nazewnictwo} \tikzstyle{na} = [baseline=-.5ex] \large \[ \tikz[baseline]{\node[fill=blue!20,anchor=base] (t1){\Huge{$a$}};} ...
5
votes
1answer
596 views

How to put resized arrow tips at both ends of a dashed line?

I know how to put a resized arrow tip at one end of a dashed line, but not at both ends. See the image below. \documentclass[pdftex,12pt,a4paper,english,dutch,leqno]{article} ...
3
votes
1answer
597 views

How to specify the arrow length in TikZ?

I've a small problem in Tikz. I try to draw arrows within 4 dimensions. Every arrow should have equal length. My implementation right now works with coordinates. There is a rectangle with a center ...
6
votes
1answer
802 views

Dashed down arrow

I am looking for a solution for dashed down arrow. Have already tried packages like lucidabr and MnSymbol, but these turn my whole stuff upside down, producing a lot errors like "Something is not ...
11
votes
2answers
549 views

Repositioning and resizing arrow tip on circular (arc) path

I'm working with some graphs, and I'd like to indicate a certain orientation of edges incident on a vertex. With some help I've managed to get this far: \documentclass{article} \usepackage{tikz} ...
8
votes
2answers
477 views

\to arrow with tikz or tikzcd

I want to replace the usual \to short arrow by an (approximately) equally short arrow with a nicer tip. Although completely newbie, I'm fond of tikz-methods and I write all my commutative diagrams ...
11
votes
1answer
528 views

Drawing a circle around a node that looks like an arrow

So I'm using TikZ, not too well-versed in it, and I would like to draw a node (unlabeled, just a dot) and with a dashed circle around it that has an arrow on it (this indicates direction). Basically ...
6
votes
1answer
687 views

How do I put text over a squiggly arrow?

I am currently trying to write text over a squiggly arrow (\rightsquigarrow). For normal arrows, I use the extarrows package, which provides commands like \xlongrightarrow and \xLongrightarrow which ...
6
votes
3answers
1k views

Drawing vertical arrow to a table column

I would like to draw an arrow to the center of a table column as the following. How can I do that?
9
votes
1answer
967 views

Curved text (on multiple lines) within curved arrow using tikz

I have a curved arrow and want to put text inside of it (having the same curve as the arrow, of course). If the text is longer than the arrow, the text should be put on multiple lines (optimally with ...
5
votes
1answer
472 views

Arrow heads as plot marks

I would like to draw a plot and put arrow heads pointing in the direction of the plot instead of marks. My first idea was to use the quiver option from pgfplots by duplicating and stagering the ...
12
votes
1answer
307 views

Parallel flowcharts: conjoined nodes, arrow routing and alignment

Transitioning from GraphViz to TikZ is hurting my brain... My task is to generate flowcharts of the following variety: In particular, I need a method to position nodes that share borders ...
10
votes
3answers
697 views

Decorate path with arrows at nodes

Standalone example: \documentclass{standalone} \usepackage{tikz} \usetikzlibrary{shapes} \begin{document} \begin{tikzpicture} \draw[black, very thick] plot[smooth] coordinates {(4,1) (2,2) (1,3) ...
5
votes
2answers
557 views

Easy way to write below arrow (\arrow{-U>}) in chemfig?

I have been using chemfig for a while and I like it very much. But some small things I still can't do. Check this example: \schemestart ...
1
vote
0answers
43 views

Error raised with node [closed]

I have the following code that raises "undefined control sequence" error on the line that draws redarrow. When I continue with compilation, it does produce the red arrow, but gives this error that I ...
1
vote
0answers
375 views

Arrow head not showing up [closed]

I am not sure what I am doing wrong, but the arrow head on the link from the bottom left box to the upper right box does not show up. I want it to be the same as the arrow heads on the other edges. ...
4
votes
5answers
568 views

Looking for a symbol (arrow with dot)

I am looking for this symbol: I recently discovered it in a paper. However, I was not able to find it in the "Comprehensive List" (symbols-a4.pdf) or anywhere else.
0
votes
1answer
1k views

TikZ-pgf directed graph: change arrow color and location

I have something like this: \SetVertexNormal[Shape = circle, LineWidth = 2pt] \SetUpEdge[lw = 1.5pt, color = blue] ... \begin{tikzpicture} \Vertex[x=0 ,y=0]{1} ...
7
votes
1answer
447 views

Tikz arrowhead size in tree using decorations?

Tikz is weird when in comes to decorating tree edges. I'd like to draw a tree with a snakey line with an arrow in the middle. What sounds simple is somewhat tricky but I found a solution with a ...
14
votes
1answer
868 views

$\overrightarrow{a} \otimes \overrightarrow{b}$ looks unpleasant

As the question says, $\overrightarrow{a} \otimes \overrightarrow{b}$ looks rather unpleasant because the arrow over the a is so much lower than the arrow over the b. I'm not sure that just raising ...
2
votes
1answer
385 views

Customizing arrows with Tikz

I'm working with Tikz package and I want to create a new arrow tip. So I used the following code which I found in internet: \documentclass[a4paper]{article} \usepackage{tikz} \usetikzlibrary{arrows} ...
4
votes
1answer
629 views

pgfplot annotation spacing and arrow length

I am trying to make the following figure using pgfplots. \documentclass{article} \usepackage{pgfplots} \pgfplotsset{width=8cm,compat=1.5.1} \usetikzlibrary{decorations.markings} % Arrows ...
5
votes
1answer
549 views

Adding arrows, text, and overlaying to two nodes pointing to the same node in beamer and tikz

I would like to create a diagram similar to: http://www.texample.net/tikz/examples/marketing-distribution-channel/ Instead, I would like for the 2 nodes at the bottom to point to the top node, and I ...
5
votes
2answers
341 views

TikZ: child inheriting arrows

I am trying to draw some Feynman diagrams using TikZ but seem to run into trouble where the arrow of a parent is also applied to the child, giving me two arrows on one line. (I have been using the ...
4
votes
1answer
499 views

Putting an arrow on an arrow in Tikz

In the MWE below: \documentclass{report} \usepackage[left=2.5cm,right=2cm,top=2cm,bottom=2cm]{geometry} \usepackage[T1]{fontenc} \usepackage{tikz,pgf} ...
3
votes
1answer
284 views

Customize |<->| arrowhead in Tikz

I am quite happy with the |<->| arrowhead in Tikz but I would like to control the length of the |. Is there a simple way to achieve this? In tikz.code.tex, I could find ...
10
votes
2answers
1k views

inclusion arrow in TikZ

How can I give shape to some arrow in tikz, to draw the inclusion arrow? I read a similar question How to typeset inclusion arrow? with given answer, but the answer didn't really used tikz and I ...
3
votes
1answer
189 views

Tikz text not adjusting itself for the arrow

I have the code below which produces the image (unfortunately the code doesnt work since the image files are not available here). The text "Done" is for some reason getting placed well below the ...
2
votes
1answer
284 views

Making figures (listings) be like tikz node/arrow transitions

I have the MWE as below: \documentclass[a4paper,11pt,twoside]{report} \usepackage[left=2.5cm,right=2cm,top=2cm,bottom=2cm]{geometry} \usepackage[T1]{fontenc} \usepackage{graphicx} ...
3
votes
3answers
366 views

Join arrows and wide nodes with tikz

I want to create a flow chart with tikz that looks like this: ------------------------------- | wide node | ------------------------------- | ...
3
votes
1answer
344 views

variable sized harpoon delimiter

I would like to have a variable sized delimiter version of the ams symbols \downharpoonleft, \downharpoonright and \upharpoonleft, \upharpoonright respectively, such that they work with \left and ...