{bibtex} is specifically about Oren Patashnik's BibTeX program, its .bib database file format, and use of these in creating documents. For general questions about bibliographies and citations, use {bibliographies} instead.

learn more… | top users | synonyms

1
vote
0answers
18 views

Use bibtex info for register of persons

I am wondering and have intensely and unsuccessfully searched if there is any possibility to use the bibtex author info to create a register of persons without going through all my documents and add a ...
1
vote
0answers
130 views

“Dynamic” new command in LaTeX

Although I've been using LaTeX for a long time, I never defined "dynamic" new commands. Here is what I have in mind: I define a new command such as \newitem with the following inputs ...
1
vote
0answers
45 views

Using The Author Formatter to custom the author view format

I want to make my bibliography (The Author) to be like this : Yu, E., Giorgini, P., Maiden, N., and Mylopoulos, J. Social modeling for requirements engineering: An introduction. In Social ...
1
vote
0answers
73 views

Combine sections into chapter. Each section a separate .tex file

I am putting together a portfolio of evidence together. I have written all the individual pieces of evidence as separate latex documents. Some of these documents have references at the end of the ...
1
vote
0answers
34 views

How to add supporting material link together with cited reference when using bibtex?

I am going to cite a research article which also has useful supporting data by authors in their website. How can I add the link into Bibtex? Or do I have to cite the supporting data link as an ...
1
vote
0answers
69 views

How do I italicise book titles rather than underline them?

I've been editing a bst file and want to italicise the titles of books, I tried the suggestion in this thread Is it possible to italicize journal names and book titles through the .bst file? , but I ...
1
vote
0answers
92 views

Bibtex files not found in Miktex texify

I want to run texify (the combination of pdfLaTeX+MakeIndex+BibTeX) in the command line, so I can add my own options and don't have to open texworks. To clean up my directory I tried to move the ...
1
vote
0answers
175 views

Run Bibtex on aux files in subfolders, multiple OS

I have a complete framework for my PhD thesis based on classicthesis/arsclassica. Single chapters are located in Subfolders like this. main.tex Chapters/project1/project1.tex ...
1
vote
0answers
127 views

apsrev4-1 bibliography style: only show the starting page

See the following MWE: \documentclass[secnumarabic,amssymb, nobibnotes, aps, pre, twocolumn]{revtex4-1} \newcommand{\revtex}{REV\TeX\ } \newcommand{\classoption}[1]{\texttt{#1}} ...
1
vote
0answers
579 views

! LaTeX Error: File 'natbib.sty' not found

I have a problem compiling an article using natbib. I am using WinEdt to compile, for example this what I found online: \begin{filecontents*}{bibtest.bib} @book{goossens93, author = "Michel ...
1
vote
0answers
156 views

Bibliography failing to appear

I am using someone else's code to type the bibliography, I thought it would be a nice idea to see something different from my usual approach. I can always switch back to the safe path but this problem ...
1
vote
0answers
34 views

Problems with middle name

In my literature directory it only shows the first and last name, but I want to see the middle name as well. My codes is: \documentclass[a4paper,12pt]{article} \bibliographystyle{chicago} ...
1
vote
0answers
45 views

How to delete web links from references in Gost style?

I need to remove web links like DOI and Pubmed from litterature references produced in Gost style. What functions and lines of code are responsible for that? Reference looks like: Weyn, B. ...
1
vote
0answers
40 views

Address book similar to BibTeX to be used on LyX

I have a list of addresses. While writing the report (not in letter), I need to add address repeatedly. Is their something similar to BibTeX, which I can use with LyX for automating inclusion of ...
1
vote
0answers
56 views

problem with harvard referencing style

I have to use Harvard referencing style for my essay, but there is a problem. In reference list it doesn't show the publisher and the address of the book. Also, could it write edition instead of edn.? ...
1
vote
0answers
73 views

Problems with formatting jurabib output in LyX

I am having trouble using jurabib to create footnote citations in LyX. I followed the instructions for setting up LyX to use jurabib, see http://wiki.lyx.org/LyX/HumanitiesLyX Following the wiki ...
1
vote
0answers
160 views

\citet and \citep in texstudio using natbib

I am new with respect to using Texstudio and I have just written my article in Texstudio, but I cannot get the citations right(?) I use the natbib in usepackage in the preamble, it is stated before ...
1
vote
0answers
106 views

BibTex scientific style with pages at the end

Where can I find bibtex style, which looks approximately like this? Somehow all styles (even science.bst), which I find use format.vol.num.pages function, which put pages right after volume number. ...
1
vote
0answers
66 views

Bibtex webpage citations, including journal and title?

I'm working on a LaTeX bibliography using natbib and apa-good.bst that includes a number of web sources, including both websites and newspaper articles published online. Based on other responses on ...
1
vote
0answers
57 views

How to output bibliography as \bibitem{bate}

I am writing final year thesis in undergraduate. I have already have xx.bib, like @article{Ahmad2012, author = {Ahmad, Imtiaz and Higgins, Peter M}, file = {:home/peng/Documents/Mendeley ...
1
vote
0answers
47 views

Spacing by language in jurabib bibliography

Note that I am still using jurabib because it interacts very well with LyX. I can use the citation button (\cite) and thanks to jurabib's "citefull" feature I still get full citations in footnotes. ...
1
vote
0answers
85 views

jurabib style bibliography versus body or footnote

I know jurabib isn't today's jam and I should use biblatex. However, biblatex isn't very well integrated with LyX yet, as far as I can tell and Jurabib works quite fine out of the box apart from ...
1
vote
0answers
80 views

not always et al, sometime full author list

I am having an odd problem; sometimes the full list of authors is inserted in the text, ie. the citation is not shortened to name et al. (which is what I want). I am confident it is not an error in ...
1
vote
0answers
85 views

how to generate document statistics?

In another question, manual steps are explained to implement stats. Due to a deadline and for some convenience, is there a package that generates document stats without many modifications in several ...
1
vote
0answers
64 views

reference style avoid omitting author name

I tried Harvard, urst, JF, still have the following references I would like to show the same authors' names again instead of using the long line to replace them. How should I do this?
1
vote
0answers
36 views

How to disable certain bibtex properties from appearing in bbl?

as the title suggests, I have BibTeX entries with e.g. page numbers and URLs. I want to keep this information in my BIB (which is managed by JabRef) but I want to choose which properties appear in ...
1
vote
0answers
35 views

To have bibliography of Revtex along the text in two-columns

I am thinking about having a heading for References, since I think it is needed in publications. My minimum tex \documentclass[twocolumn]{revtex4-1} \usepackage{newunicodechar} ...
1
vote
0answers
57 views

Author address in Bibtex?

I have not seen author info in any article, research paper etc. Is it possible to have address/organization/institute of each author of an article in Bibtex?
1
vote
0answers
159 views

Receiving the message error “{” immediately follows a field part---line"

I use bibtex and my bib file looks like @article{Bohm, title = {Discussion of Experimental Proof for the Paradox of Einstein, Rosen, and Podolsky}, author = {Bohm, D. and Aharonov, Y.}, ...
1
vote
0answers
156 views

How to denote a “work in progress” in BibTeX

What is the correct way to reference in BibTeX an article that has no title yet? All the information I have right now is a list of authors (not even certain), a year (perhaps), and the knowledge of ...
1
vote
0answers
60 views

How to make BibTeX concatenate sub-strings in the same entry

For the BibTeX entry as below booktitle = {Decision and Control, 1999. Proceedings of the 38th IEEE Conference on}, How to make BibTeX automatically concatenate the sub-string of "Decision and ...
1
vote
0answers
73 views

Customizing references style

I plan to submit a paper to ICVL. Their reference of itspaper template has the following sample. Is it possible to render this structure in LaTeX? 4 References 4.1 Books: Bergman, B. and Klefsjö, ...
1
vote
0answers
131 views

How to cite data?

Data can be cited. Citeable data has fully persistent DOI's that link to recognised data repositories. This ensures that the data used in scientific publications can be obtained and re-used in the ...
1
vote
0answers
298 views

In \bibliographystyle{alpha}, can I sort references by the first author's last name instead of by the marker?

I'm creating a bibliography using \bibliographystyle{alpha}. Consider the following three references. [Gab72] Peter Gabriel... [GJ09] Paul G. Goerss and John F. Jardine... [GR92] Peter ...
1
vote
0answers
75 views

Adjusting longnamesfirst to use et. al. on first occurence with more than 3 authors

I am making final adjustments to my thesis, ensuring that I am using the correct citation rules etc. Now it turns out I need to use all the authors' names in a citation on the first occurrence, as ...
1
vote
0answers
91 views

Problem with natbib and “To appear” and “In Preparation”

The following citations produce a text that reads Meier (To Appear,I) although the .aux file contains the right information: \relax \citation{a,c} \bibdata{SM} \bibcite{c}{{1}{In ...
1
vote
0answers
57 views

Showing bibtex article entry “number” with revtex

I am using revtex4-1 and BibTeX to create a bibliography. Most entries in my bib file shows up fine, but I am having troubles with two journals, Cosmology and astroparticle physics and Living Reviews ...
1
vote
0answers
62 views

custom bib style, book output with pages numbers ex. 522pp

This is my first post, after I have been looking for a while at the related posts without success. I'm using TeXworks (0.4.3 r.857 MikTeX 2.9 64bits) on Windows. Well, I have modified an existing ...
1
vote
0answers
232 views

Tweaking makebst output (chicago-style citation)

I've created a bst file (below) using makebst. Third time round, I've got most of what I want, except: (1) "Surname, First, 2013." should be "Surname, First. 2013." (Fullstop, not comma, between ...
1
vote
0answers
476 views

BibTeX: Citations appear with three names instead of first name + et al

I use natbib and the bibliography style aipauth4-1.bst. When I cite entries that have 3 authors, all three names appear in the text. It is the first time I see something like that, other bst styles do ...
1
vote
0answers
263 views

TeXlipse, bibunits, and multiple bibliographies

I am using Eclipse 4.2 with TeXlipse 1.5 (the version bundled with StatET 3.2) and MixTeX 2.9. I have no problem using TeXlipse, bibtex, and natbib to produce bibliographies. But I often want to ...
0
votes
0answers
7 views

Edit BibTeX items appearance to add line break

I'm using BibTeX with a style called "hispa-annote" (source file), and @Misc items (that I use to link to websites) currently look like this: I'd like to have the title in one line and the url in ...
0
votes
0answers
10 views

latexdiff doesn't mark changes in bibliography (BibTeX)

I'm using latexdiff to show changes between versions of an article written with the achemso package, but it doesn't seem to be able to highlight changes within the bibliography (including added ...
0
votes
0answers
9 views

How can I add annotations to my astroads.bst bibliography?

I'm using the AstroADS BibTeX style (link). I would like to add annotations to my bibliography entries for various scientific papers. Is there an easy fix, or is there another style file I could use? ...
0
votes
0answers
11 views

Bibtex with “ociamthesis” class and Bibliography style “ormsv080”

I am writing my thesis using ociamthesis class and bibliography style ormsv080. I have a large number of citations and when I am compiling the master file which looks as following, I am not getting ...
0
votes
0answers
20 views

modify plain.bst file

I would like to modify the file plain.bst in order to customize my bibliography. I want several things : names in bold followed by date (month year) skip a line between name of authors and title of ...
0
votes
0answers
32 views

Controlling the way bibliography data are printed

I'm preparing the bibliography for my thesis and, while I am overall satisfied with the result, a couple of things are not under my control. I want to cite a document classified as @inproceedings: I ...
0
votes
0answers
42 views

Paragraph ended before \@lbibitem was complete error

I've happily typing up my report and including references when suddenly it refuses to compile and outputs C:\Users\User\Documents\Project work\Latex Report\Main\master.bbl:53: Paragraph ended before ...
0
votes
0answers
33 views

I'm using apa6 and BibTeX in Kile; what's wrong with my bib links?

The Question Why are the links in the Works Cited breaking like that? How can I remedy that? Main File \documentclass[jou,apacite]{apa6} \usepackage{hyperref} \title{Web-based IDEs: A Brief ...
0
votes
0answers
25 views

LyX won't compile without UTF8 document class option

I have a shared LyX document that is using document class article with custom class option utf8. I'm having trouble getting a newly installed .bst file to work (meaning, document will compile but all ...