{blank-page} is about creating and handling blank pages in (La)TeX

learn more… | top users | synonyms

1
vote
0answers
45 views

How to insert blank page after tittle in two sided document

I have a two sided document and I want to print. The abstract comes on the back side of the title which is not neat. I want the abstract to be on a separate page (right sided). I will have to do ...
0
votes
0answers
19 views

Overpic+graphics full size image

I'm using graphics+overpic to create the title page of a book and I had a struggle eliminating a blank page that the code generated at the beginning of the book. So I insert the image with overpic, ...
0
votes
1answer
27 views

How to move section label to new page if it is at the end of the page [duplicate]

In my report, sometimes, the section label is getting completely at the bottom, or if sometimes not completely, after the section label, there is only one or two lines, like the picture below: How ...
0
votes
0answers
23 views

Pushing the whole block of text to a new page [duplicate]

I wrote a a command in latex which takes a source (from where the text came from) and a block of text to display it. Here is the command: \newcommand{\quranVerse}[4]{ \\[1\baselineskip] ...
3
votes
1answer
26 views

Changing the default for indexing from two columns to one, and getting rid of default page break

I need to create a table of cases for my thesis in international law and I'm using imakidx. Cases decided by international tribunals have long names and numbers as part of their citation, so if I have ...
2
votes
0answers
28 views

Remove blank page after end of chapter [duplicate]

I have used a double-paged template and it currently creates a blank page such that the new chapter always begins on the left side. However, my report is quite small and I would like to remove these ...
4
votes
1answer
62 views

How could I remove the blank page before the title page?

I'm using latexian to edit my manuscript. However, the first page is blank. The following is my latex code. How could I deal with this problem? \documentclass{article} \usepackage{authblk} ...
0
votes
0answers
56 views

How to remove a blank page between a landscape and a portrait pages

I am using an article class document for my thesis. I have created on of the tables in a landscape format and the next table on a portrait page, however, I am getting an empty page between them. How ...
1
vote
1answer
49 views

Empty Last Page in IEEE Conference Format

I am writing a conference paper with a preamble like this. \documentclass[conference, 10pt, letterpaper, twoside, twocolumn, final]{IEEEtran} The conference has a page limit of five pages. After a ...
0
votes
0answers
79 views

How prevent extra page and text running off bottom of page in Latex?

I am struggling trying to build a Latex document using the report document class in TexMaker outputting to PDF on a Debian system. My second chapter inserts a blank page between it and the beginning ...
4
votes
1answer
64 views

How to begin a multiplepage ToC on the left and to insert blank pages around it

I use this the article class (I prefer to stick to this one for compatibility), in twoside mode with a toc taking two pages (but it would be better if the code copes with an arbitrary number of ...
7
votes
1answer
166 views

Different headers/borders for each page

I'd like to apply a different heading/border for each page. The footers will all be the same. I want it to look like this: I can make the first two pages different but I don't know how to get ...
1
vote
1answer
84 views

How can I avoid blank spaces when I insert a pdf figure?

in the following piece of latex code, I would like to place a pdf figure called sharpideq2 at page 1 among the text rows, avoiding blank space. What I get instead is the figure placed alone in the ...
2
votes
2answers
49 views

Misalignment chapter titles with hang option of titlesec package and redefined \cleardoublepage

When I redefine the command \cleardoublepage to include the words "This page has been intentionally left blank", the titles of the chapters are misaligned. \documentclass{book} \usepackage[a4paper, ...
0
votes
0answers
18 views

Adding blank pages when generating multiple copies of a document [duplicate]

I'm generating multiple copies (right now, 2, but a general solution would be nice) of a letter with minor variations using datatool. I just realised that if I'm printing it double-sided. and if the ...
6
votes
2answers
70 views

How to remove sep. rule from blank pages when using two-column mode?

In the following example: \documentclass[twocolumn]{memoir} \usepackage{lipsum} \setlength{\columnseprule}{0.4pt} \begin{document} \twocoltocetc \tableofcontents \chapter{test} ...
2
votes
1answer
56 views

Blank page changes headings and footers

I am trying to insert a blank page in a article class document, and I want it to have the same headers and footers as the rest of the document (which I have already set up using fancyhdr). However, ...
3
votes
1answer
141 views

Extra blank page while designing front cover with tikz

I’m trying to design the front cover of a book with tikz package. The following is my latex code: \documentclass[b5paper,11pt]{article} \usepackage{geometry} \usepackage{tikz} \begin{document} ...
2
votes
1answer
128 views

Need to remove blank page

I have a blank page in the middle of my document that I'm unsure how to remove. Beginning \documentclass{article} \usepackage[a6paper, top=1cm, bottom=1cm, left=1pt, right=1cm]{geometry} ...
5
votes
2answers
450 views

An extra blank page in the document

the following code inserts an extra blank front page in my document though I have not even mentioned any title or whatsoever. Please guide me where am I going wrong. Thanks In advance. ...
3
votes
1answer
63 views

How to remove unncessary whitespaces between two lonely figures on page

Im sure it's an easy question but I cant figure it out and I was searching google for different keywords crossing my mind but couldn't find a relevant post. I have two tables which are positioned on ...
0
votes
0answers
125 views

Remove blank page between last chapter and appendix?

I'm having this problem: last chapter [annoying blank page] appendix I tried solving it by looking up for some answers here but nothing seems to work for me. Please help me. Thanks. ...
2
votes
1answer
164 views

Can't insert/remove a blank page in main document

I'm on Win7 with TeX Live 2013 and TeXstudio. I have a main.tex file (\documentclass[...]{scrartcl}) with 2 \input{file} commands. I want to put a blank page between the table of contents and the ...
3
votes
1answer
267 views

What is producing this blank page before the title?

After compiling the code below, I get a blank first page in my output (which is undesirable). I have no idea why I'm getting this blank page. Can someone help? ...
1
vote
1answer
606 views

How to remove a blank page after maketitle, scrbook

There appears a blank page between the title page and the table of content. Many had this problem, but no solution works for me, because no one used the scrbook class. ...
2
votes
4answers
3k views

How to remove a blank page “before” the title page

I'm using MiKTeX 2.9 and TeXniCenter for writing my thesis. I have a lot of packages and everything was going well, until last night that a blank page with ".0" written in the top left corner kept ...
2
votes
0answers
876 views

Unwanted blank pages before and after a chapter [closed]

I use Xelatex, and the class Report I have a document that follows this simple architecture : \part (thee) \chapter (nine chapters and two chapters* (for introduction and conclusion) \section ...
1
vote
1answer
405 views

Why do I get an unnecessary blank page between abstract and acknowledgement?

There is an unnecessary blank page between abstract and acknowledgement. The content of abstract.tex is between \begin{abstract} and \end{abstract}. The content of ack.tex starts with ...
3
votes
1answer
428 views

remove blank pages from ClassicThesis

I am using ClassicThesis in LyX. I have problems with the autogeneration of blank pages in the template. At the moment a blank page is inserted infront of a chapter if the chapter would have started ...
2
votes
0answers
340 views

Blank page with page number after list of figures

I am getting a blank page after list of figures after compiling my TeX code. When I use \clearpage command, the page is removed but it reduces the total number of pages in my entire document. I am ...
3
votes
1answer
237 views

Trouble with Bible Style page header lines

I'm attempting to typeset a Bible for my mom and I'm running into a few problems and I was hoping someone here could help. First I'll start with the easy question. I'm currently using two columns ...
3
votes
1answer
1k views

Blank pages after \include in LaTeX report class

I'm writing my thesis as several separate chapters and incorporating them into one .tex file. Some of the chapters are pdfs of articles, and they are simply added to my master.tex using \input. ...
1
vote
0answers
179 views

How to remove blank pages with random numbers coming between two chapters? [closed]

I am writing my thesis using \documentclass[12pt,a4paper,twoside]{book} but at the end of some chapters I am getting a blank page with a random number on the top of the blank page.Can anyone ...
4
votes
1answer
215 views

blank page shows up after adding \usepackage[pdfpagelabels]{hyperref}

I have index.tex that I made a copy of it. renamed the copy to index_bad.tex, and added the line \usepackage[pdfpagelabels]{hyperref} to its preamble. So the 2 files are identical other than this ...
0
votes
0answers
45 views

Make chapters start on odd pages [duplicate]

I need to make my chapters start on odd pages and keep heading and page numbering for the blank page before it. I read somewhere that Latex makes this in book documents by default, but I'm still ...
2
votes
0answers
36 views

How do I put a blank page between two pages of the table of contents? [duplicate]

My table of contents have two pages, page ix and page x, but I want to just let even pages have contents, so I have to put a blank page between those two. So I need to have the TOC at pages ix and xi, ...
1
vote
1answer
70 views

How do I put a blank page IN summary?

my summary have two pages, page ix and page x, but I want to just let even pages have contents, so I have to put a blank page between those two. So I need to have the summary at pages ix and xi, and ...
0
votes
1answer
817 views

Unwanted blank page prepended to large table

Problem-ku: A page-long table Gets a blank page prepended I do not want this The table is very large (69x20) but fits on one page. Here's the code I'm using at the beginning and end of the ...
0
votes
3answers
328 views

How to start document with empty page followed by table of contents?

In a book class document, I am trying to insert one empty page before the table of contents. I tried with the following code : \documentclass[a4paper]{book} \begin{document} ...
4
votes
1answer
502 views

Inserting a blank left starting page in a Koma-script book

I am finishing my dissertation, and I'm using the Koma-script scrbook class. My text starts on a right page, which is exactly what I want, but for printing I need to add a completely blank, unnumbered ...
3
votes
1answer
301 views

How can I get rid of a blank page that appears me before my references?

I'm using WinEdt 7. I would like to know how can I eliminate the blank page that appears before my references. This is my code (.tex): \renewcommand{\bibname}{ ...
3
votes
1answer
152 views

Avoiding empty page between a very full page and the index?

I'm getting an empty page between the last page of the book and the index. The reason seems to be an over-full last page of text. I'm already using openany. In the following example, all the "bla" ...
6
votes
2answers
727 views

Latex inserting blank pages between figures

I have a large number of (.eps) figures which I want to put into a stand-alone .pdf document. I have a script which puts together the code shown below twice (but is repeated dozens of times). The ...
3
votes
2answers
240 views

Why is a blank page inserted in the middle of the first signature when impositioning with Context?

Tonight I'm impositioning a book for doublesided printing on A4 sheets. The book is in A5 format and will be bound with octavo signatures (4 pieces of A4 sheet are folded in half to form 16 pages of ...
1
vote
1answer
197 views

How do I use \hfill and \maketitle without creating a blank page?

I'm trying to put my name in the right-hand side of the header and have a title that is not on its own page. When I put \hfill before \maketitle, I get a page with just the header, followed by the ...
0
votes
1answer
394 views

How to remove blank first page in document that contains only tables and figures [closed]

Actually I want to move my figures and tables to a separate LaTeX file. But when I compiled that new file I got a blank first page. So I want to know how can I remove that blank first page. By the ...
1
vote
1answer
406 views

Force scrbook class to have only oneside option

In my custom .cls class file I'm using the following code \LoadClass[10pt,twoside=true,open=right,cleardoublepage=empty,chapterprefix=true]{scrbook} This is ok, but I would like to force oneside ...
6
votes
2answers
510 views

How do I get a blank column?

I'm trying to create a program (i.e. the paper kind you hand out) in LaTeX. I've got \documentclass[landscape, letterpaper] and I'm running into problems with the columns. I've tried multicol, ...
6
votes
2answers
1k views

Deleting blank page after title page

Using amsbook, I get a blank white page after the title page and before the TOC. Any way to delete this page? Many thanks. Here is a MWE, for what it's worth: \documentclass[openany]{amsbook} ...
1
vote
1answer
235 views

blank page not created

I create a blank page using \newcommand\blankpage{ %comando pagina vuota \null \thispagestyle{empty}% \addtocounter{page}{-1}% \newpage} Here it is one my page: ...