1
vote
0answers
22 views

Caption with two figures in a single column

How can I put two figures in a single column, with a label (say a), b) ) on the left and in the middle or top of each figure? I was trying \newcommand{\Inserttwopgf}[6]{% \begin{figure}[t] ...
6
votes
2answers
50 views

Arrange three images (with an own caption for each) in two rows using subfig package

I would like to arrange three figures like this: a long one on the left and two smaller square ones right to it (above each other). All three images need to have a separate caption. I am using the ...
3
votes
1answer
34 views

Subfigure captions not centered

Having trouble getting captions in my subfigures centered. I've played around with the caption and subcaption packages a little bit and it seems like the subfigure captions are being treated like ...
5
votes
1answer
45 views

Use \captionof in conjunction \subfigure?

I'm using the KOMA scrreprt class. I have a large figure with 6 subfigures, and a lengthy (but necessary!) caption explaining the figure that doesn't fit on the same page. I'm trying to use the ...
1
vote
0answers
22 views

subfigure global counting caption

I would like to keep subfigure count my figures globally and label them continuesly. This is the way it is: [Fig 1] [Fig 2] [Fig 3a Fig 3b] [Fig 4] And that is the way I want it: [Fig 1] [Fig ...
0
votes
1answer
69 views

Overlay subfigure caption with TikZ

I'm trying to place my figure captions on top of the figures. I've found some code that does this and I can get it to work for a normal figure - e.g. I can overlay "Figure 1" on top of the figure. ...
2
votes
1answer
58 views

How to insert a main caption beside subfigures?

I have 3 subfigures that I insert at width=0.5\textwidth, which leaves some empty space. I would like to insert the main caption in this space. How can I do this? I am using subcaption package for ...
0
votes
0answers
22 views

How can I get the subcaption to be aligned left of the subfigure? [duplicate]

The picture says it all. I would like the subcaption to be on the left of the subfigure, below the top of the subfigure. Ideally, a solution with the subcaption package would be good (if there is one) ...
2
votes
1answer
36 views

matching height of subfloats by defining height screws up captions

I am Using the following method to put two pictures beside each other in one figure: \begin{figure}[ht] \centering \subfloat[ Caption 1 ...
1
vote
1answer
28 views

How to direct all sub-captions of the subfigures in a central caption

Is there a way to direct all the \caption{}'s found within multiple nested subfigure environments within a central \begin{figure} environment given as \begin{figure} ... ...
4
votes
1answer
64 views

Distorted caption in listings

The following code produces strange results. Everything looks fine, if I don't include the subfig package or don't use the xleftmargin parameter. It also works if I use captionpos=t. Is there a ...
4
votes
1answer
35 views

Caption package in subfigures

In Wikibooks it is suggested that to have subfigures, one should use the subcaption package. However, in the given example, the caption package is also included. Is it necessary here? If so, what is ...
2
votes
2answers
140 views

Resize figures using subfloat environment in elsarticle class

I was working with the elsarticle class and subfig package for my article and I used the subfloat environment to include two pictures. However, the scaling of the pictures is completely wrong and the ...
5
votes
1answer
143 views

How to make distance between captions of close pictures?

The captions between the pictures are too close to each other. How can I make some space between them, but do not move pictures itself? \documentclass{article} \usepackage{graphicx,subfigure} ...
2
votes
1answer
57 views

Multiple images and proper side-caption positioning

I would like to put three images on one page (as one figure). First two of them stretched over 100% of textwidth and the third one over 50 % with the caption beside the third picture (to spare space). ...
2
votes
1answer
83 views

Subfigure and caption placement

I have 5 images to place (using the subfigure environment), I would like to place them either in two columns (one with 3 images, the other with 2), or in two lines (idem) and use the empty place that ...
1
vote
3answers
67 views

How to add multiple images in one place using captions like Figure x. a, Figure x.b?

Is it possible to caption the two figures as Figure x.a, Figure x.b?
2
votes
2answers
229 views

Horizontal text alignment in captions for subfigures

Captions in subfigures are justified by default, which does not always look pretty: \documentclass[]{tGIS2e} % http://www.tandf.co.uk/journals/authors/tgislatex.zip \begin{document} ...
4
votes
1answer
94 views

Captions in sub floats using subfloatrow are too narrow

I have a figure that has several subfigures, each with its own caption. I am aligning the subfloats using subfloatrow. How do I make the captions expand at least to the width of the graphic? Currently ...
4
votes
1answer
61 views

Centering Subcaptions including a linebreak

I found an asnwered question concerning this topic already here: Centering a subcaption Copying \captionsetup[subfigure]{justification=centering} doesn't help me thought for I am using different ...
1
vote
0answers
54 views

Caption numbering missing in beamer class when adding subfig package

I am having a problem with the beamer class and subfig package. Once I add the subfig package (for subfloats) the numbering of all my captions disappear. Please see the following minimial working ...
5
votes
2answers
403 views

Top-aligned subfigure with bottom-aligned caption

This is a follow-up to an earlier question regarding left-aligning subfigure captions. Having achieved the left-alignment goal, I would now like the caption of the subfigure to be bottom-aligned, ...
3
votes
1answer
70 views

Two figures side by side with two captions and alphanumeric counting [duplicate]

How can I have two figure side by side with two captions and in the floating format, like fig. 10A. some caption fig. 10B. some caption
3
votes
0answers
69 views

Tricky problem with sources in list of figures

I've a very tricky problem here: MWE: \documentclass[12pt,german]{article} \usepackage[demo]{graphicx} \usepackage{caption} \usepackage[list=true]{subcaption} \begin{document} \begin{figure} ...
3
votes
1answer
287 views

How to annotate figures with TikZ without affecting the float position? a template for western blots

I want to do some kind of figures, typical of Western blotting in biology. The figures are enclosed with a frame using mdframed package. A MWE example is shown below. In the middle of creating this ...
2
votes
1answer
131 views

How to set subfig options independently from caption options

My aim is to set the font style for caption labels as small caps and for sub-caption labels as normal. But apparently the option sc of the package caption also trickles down into sub-captions.. ...
5
votes
1answer
73 views

Alignment of captions in subcaption

I am using subcaption and want to have the following effect. I want the main figure to contain several subfigures. I want the subfigures to have captions that only come from the \caption{} tag, i.e. I ...
2
votes
1answer
97 views

Multiple listings in one box with sub captions and using listings counter

I am using separate counters for (graphics) figures and listings. I am using the caption and subcaption packages. I construct sub-figures using subfigure: \begin{figure} ...
2
votes
2answers
730 views

Put two pictures above one another within one sub float / reference problem

I was going through some crazy hoops to get minipage and subfloat work nicely (?) together, only to find out in the very end that I screwed up the figure references. I have a figure with two ...
6
votes
1answer
671 views

How to keep multiple figure together

I have 6 graphs that I have to keep together while showing. I have to make them almost same width as text width, otherwise the graphs will not be properly seen. So I cannot add them side by side but I ...
4
votes
1answer
102 views

Spacing captions in a subfigure environment

I'm trying to use the subfigure environment to generate side-by-side images with captions, however because the images are different heights the captions come out at different heights. Also, they come ...
13
votes
2answers
459 views

How to draw 3 figures and have them side by side while they're connected

I would like to have 3 figures side by side, as in one of my previous posts. However, this time isn't the same. I would like to link my figures as below: My problem is not only how to put my ...
3
votes
1answer
170 views

subfig Caption Number is 1a, How to Modify it to 1(a)?

In the following document, the sentence in Figure \ref{fig:loop} in the source produces in Figure 1a in the output, but I want it to be in Figure 1(a). How do I achieve my goal? ...
3
votes
1answer
3k views

Reduce space between subfigure and the subfigure captions

How can I reduce the space between subfigure and the sufigure captions ? Preamble \usepackage{float}%exact location \usepackage{graphicx} \usepackage{caption} \usepackage{subcaption} % for ...
2
votes
2answers
286 views

subfigures don't show (a) and (b)

I want to insert to graphs into a paper. I want to make these two graphs arranged like the top 2 graphs in the following pic however, using the following source, I can't see (a) and (b) what are ...
2
votes
1answer
279 views

Title in subfloat without line-break

My code is like this, but the title of subfigure is with line-break, which looks very ugly? How can I solve it? \begin{figure}[!ht] \centering \subfloat[Subgraph]{ \label{fig:subg} ...
3
votes
1answer
77 views

Since the captions have different lengths, I cannot horizontally align the subfigures

\documentclass{article} \begin{figure}[!] \centering \begin{subfigure}[b]{0.24\textwidth} \centering \includegraphics[width=\textwidth]{1.eps} ...
3
votes
1answer
88 views

Why does hyperref break the labels of subfigures with ContinuedFload?

This is a follow up to here: http://tex.stackexchange.com/a/130629/32245 When I insert \usepackage{hyperref} as last line of the preamble. The main figure (or the two continued figures) are labeled ...
3
votes
1answer
706 views

Subcaption Package Error

I'm having an issue compiling with the subcaption package. I'm starting to write my thesis, and I originally started a chapter with a separate document. This compiled fine and had the following ...
4
votes
1answer
463 views

Incompatibility problem of the packages subfig and subcaption [duplicate]

I want have three subfigures in a special order. One on the right, two on the left. Therefor I found a snippet here on StackExchange. Alone the snippet works fine, you can check this by comment out ...
10
votes
2answers
1k views

Subcaption with Beamer

I am trying to use subcaption with beamer, but I get a series of error messages concerning subcaption.sty when I attempt to do so. This doesn't happen in the article document class. Here is a MWE ...
4
votes
1answer
497 views

Manually change caption label in subfig

In the example: \documentclass{article} \usepackage[demo]{graphicx} \usepackage{subfig} \begin{document} \begin{figure}[h] \centering \subfloat[]{\label{first} ...
2
votes
0answers
338 views

LaTeX incorrect figure numbering [closed]

I have several figures and subfigures in a LaTeX file, but only the first few are numbered correctly. Here is the part of the code that is giving me problems: \documentclass[11pt]{article} ...
1
vote
1answer
165 views

subfigure numbering parentheses flipped with babel + right-to-left language + subfig

Eyal's babel incompatibility of the week... this time a question due to H.R. on the IVRITEX mailing list. The babel is incompatible with the subfig package. If you add a subfig with a caption: ...
4
votes
1answer
393 views

custom sub-caption and refs format for subfigures

I've just read questions: Changing the subfigure caption by removing brackets & font of the subcaption Adding parentheses around subfig references How to put two images next to each other with ...
5
votes
2answers
704 views

Horizontal centering with \subfloat

Please how to horizontally center-justify the following array of figures with the subfig package ? \documentclass[11pt]{article} \usepackage[dvips]{graphicx} \usepackage{subfig} \begin{document} ...
5
votes
1answer
10k views

Subfigures side by side with captions

I am using the following code to put my two figures side by side with different captions, \begin{figure*}[t!] \centering \begin{subfigure}[b]{0.5\textwidth} \centering ...
5
votes
1answer
181 views

subfigures in a custom float (subcaption & float packages)

I need figures and subfigures with a custom caption name. In order to achieve my goal I am trying to use float package to define new float type, and subfigure to create the subfigures. However, I get ...
5
votes
1answer
141 views

Subfigures with Captions Above AND Below

I'm using \usepackage{subfig} \captionsetup[subfigure]{labelformat=empty} Is this possible?
5
votes
1answer
235 views

Drawing a grid on each image inside the array of images

Please see what I have written,when I need individual grid on each of picture inside my figure-array. In contrast to previews question Drawing a grid on array of images. Question now is why I can't ...