{captions} is about captions for figures, tables and other, custom-defined floats or non-floating illustrations which are formatted to look identical to these floats. A popular package is caption.

learn more… | top users | synonyms

3
votes
1answer
45 views

Error in footnote inside figure caption

I am trying to insert a footnote inside a figure caption, but I am getting the following errors: *Argument of \@caption has an extra }.* *Paragraph ended before \@caption was complete.* There ...
1
vote
0answers
27 views

How to centre a specific caption?

I know that the same question was already discussed in the forum. The suggestion was to use \usepackage{caption} .. I use \documentclass{ieeeconf} instead of \documentclass{article} and ...
1
vote
2answers
47 views

ConTeXt: Suppress figures from inclusion

Background Using pandoc to convert markdown source text into a .tex file. The .tex file is fed to ConTeXt. There are two different styles. One for a polished version and one for a manuscript ...
2
votes
0answers
24 views

Caption below figure when using \put and \picture

I've been attempting to place the caption below using {put} and {picture} (using put is required as the pdf is larger than the textbox). However, I have not been able to make the caption appear below ...
1
vote
0answers
11 views

Error: \pdfendlink ended up in different nesting level than \pdfstartlink [duplicate]

I'm using overleaf to write my mnras report and I get this error when I am writing a caption for a figure. ./main.bbl:1: pdfTeX error (ext4): \pdfendlink ended up in different nesting le vel than ...
1
vote
1answer
31 views

How to set caption font to \uppercase? [duplicate]

I want to set the caption font for all tables in the document (so I want to do it in the preamble, and not have to specify it in each table) to use uppercase letter (not sc, the small case already ...
1
vote
1answer
35 views

Figure on an even page and caption on the following page

I would like to place a figure on an even page, then the caption on the following page. The reason for that is that the figure + caption is too big to fit in one page, but I want the reader to be ...
2
votes
1answer
37 views

How to get rounded edges for caption boxes using caption/captionsetup

I use the following in my preamble to ensure a gray background for my captions underneath figures and tables: \usepackage{caption} \definecolor{light-gray}{gray}{0.9} ...
1
vote
0answers
50 views

Complex questions: Unbold caption number, unbold number of equations, formatting ToC, and bibliography [closed]

How to eliminate the bold text for the caption's and the equation's number from my style's chapters? Anyone can help me.. This is my MWE: below is mystyle: % % Configuration of thesis rule in ...
3
votes
1answer
42 views

I am trying to modify the table's title with bold

I have the following minimal example: \documentclass[12pt, oneside]{article} \usepackage{booktabs} \usepackage[a4paper,margin=1in]{geometry} \begin{document} \begin{table}[h!] \caption{Final ...
2
votes
2answers
36 views

width in caption package does not react on \linewidth

I observed, that the current version of the caption package does not react correctly on width=0.9\linewidth or width=0.9\columnwidth. Here is a MWE: \documentclass{scrartcl} \usepackage{blindtext} ...
0
votes
1answer
27 views

Problem with Caption of a Table

i am making a table in Latex. Everything is fine but the Caption section is not the way i want it to be. I want the whole caption of the table in one single line, Not in two lines, the way it is ...
1
vote
1answer
46 views

How do I add x and y labels to a plot I'm inserting as an image

I received some plots that were generated in Mathematica such as this one: http://imgur.com/ZHxkI7K I would like to insert them using something like: \begin{center} \large{\emph{\textbf{My ...
0
votes
1answer
36 views

Subfig package caption figure problem

I am trying to fix subfigures. I use subfig package, but when I try to continue the figure to the next page, the second subfig shows me a wrong figure caption \begin{figure} [!htb] ...
2
votes
0answers
29 views

Missing \item when putting image in beamer

I attach my MWE: \documentclass{beamer} \usepackage{graphicx} \begin{document} \begin{frame} \frametitle{Frame title} \begin{figure}[!htp] ...
0
votes
0answers
17 views

Verbments, caption at bottom, centered

I've made a huge effort searching in google and reading the verbments documentation, but I'm unable to find what I want and I have not enough experience with latex to "hack" verbments. Basically, I ...
3
votes
1answer
44 views

I can't figure out why my ref is displaying question marks instead of a figure number regarding a float [duplicate]

Please see figure \ref{loginMock}. \begin{figure}[H] \label{loginMock} \centering \includegraphics[width=7cm]{loginIdea} \caption{Landing/Login Page Example} \end{figure} I am using ...
3
votes
1answer
57 views

captionsetup not working

I'm trying to format the caption of a table using "captionsetup", but whatever options I give it have no effect and no error message is returned. I want to format it so that the label and the caption ...
4
votes
1answer
69 views

Automatically “protect” new paragraph in extended figure caption

(Final code Here) This is an extension for an extended figure caption function I requested in Extended figure caption and accompanying "List of" . The given solution worked, but I would ...
3
votes
2answers
47 views

Hanging captions with first line also indented

I'm trying to match the formatting between a word document and latex document. In the word doc, captions have the caption label at the left margin, the label separator is effectively a tab character ...
1
vote
0answers
19 views

Figure caption problem comes when I implement in my code with memoir class, but works individually fine in memoir class

\documentclass[a4paper,12pt]{memoir} \usepackage[margin=1.3 in]{geometry} \usepackage[demo]{graphicx} \usepackage{subfig} \usepackage{subcaption} \usepackage[section]{placeins} \begin{document} ...
0
votes
0answers
15 views

Stop Classicthesis starting its reference count from figure captions [duplicate]

I'm currently using the classicthesis style and I noticed that it places a list of figure captions as part of the preamble. Now I have references in my figure captions so the result is the reference ...
1
vote
1answer
49 views

Table Border lines are not shown and Caption text width is very short

I am trying to run the following tabular code by using using "\documentclass[prodmode,acmcsur]{acmsmall}" in latex which have two problems. Border is not shown due to the overlapping of cell ...
3
votes
1answer
48 views

Common caption below vertically centered figure and table

I want to extend the answer from Table and Figure side-by-side with Table caption above, Figure caption below by making a common caption beneath the vertically centered image and table instead of ...
3
votes
2answers
33 views

Reducing size of caption box

I'm trying to add a caption which less wide than the size of the figure. I want the caption to be right-aligned and maybe like half the size it is now. Here is my code: ...
2
votes
0answers
24 views

Issue with font replacement in captions when using math mode

I'm getting annoying font replacement warnings of the kind: LaTeX Font Warning: Font shape `OT1/cmr/bx/n' in size <10.5> not available and LaTeX Font Warning: Size substitutions with ...
1
vote
1answer
52 views

Wrong caption with subfigure and tikzpicture

when i run this .tex file as input \documentclass{article} \usepackage{pgfplots} \pgfplotsset{compat=1.12} \usepackage{subcaption} \usepackage{graphics} \usepackage{tikz} \begin{document} ...
0
votes
1answer
33 views

Different font sizes in ONE caption

Update: moewe's comment worked great. removing the package cmbright resolved the problem. when I try using \caption{ bla bla \tiny bla bla} in a normal scrbook document, I keep getting the following ...
3
votes
1answer
32 views

Figure captions: one above and one below, both numbered the same

I have a figure with two captions, one above the figure (headline) and one below (explanation). That is fine, but now I want the below caption to repeat the figure number from the headline. This is ...
0
votes
1answer
32 views

Wrong caption (As Fig. A.1.) in figure when they put in last page

I got rule from journal as The manuscript (including title page, abstract, manuscript text, references, and table/figure legends), tables, and figures. Files should be labeled with appropriate and ...
5
votes
2answers
158 views

Add both a vertical side caption and a normal caption to a picture

Is it possible to add a caption to the side of the picture, written vertically in small size (for the credits), while below the picture is the normal caption? [EDIT] Minor issue: why is it that ...
1
vote
1answer
42 views

How to get latexdiff to show markup for captionof text?

Is there a way to make latexdiff highlight changes in a captionof? For example, orig.tex: \documentclass{article} \usepackage{caption} \captionsetup{parindent=\parindent} ...
3
votes
2answers
51 views

How to indent text within captionof?

Does someone know how to indent the text within captionof? I have a long caption that I want to make two paragraphs out of but indent does not seem to work. \documentclass{article} ...
2
votes
1answer
31 views

How can I replace the dot between the numbers in a caption with a dash?

How can I replace the dot with a dash between the numbers -- only in captions not in chapters or sections? i.e., replace 1.1 with 1-1 in this command: \documentclass[11pt,twoside,fleqn]{book}‎ ...
0
votes
0answers
10 views

Type of entry behind entry in list of figures and list of tables overlaps description [duplicate]

I stumbled over an odd thing when setting up the lot/lof for my document. Here comes my minimal working example: \documentclass[paper=a4]{scrbook} \usepackage{graphicx} \begin{document} ...
0
votes
2answers
54 views

How to add note and reduce the margin to figure in latex

I have two figures. But I want to used them as one figure in latex. I want to add note for them. For example (a) bellows first figure and (b) for second figure. I used below code but the margin top ...
3
votes
1answer
169 views

How to change Figure 1: to bold Fig.1. in latex

I am using default setting in LaTeX that show Figure 1: Caption.... Now, I am following the format of Magnetic Resonance Imaging journal that require Fig. 1. Caption I tried to add the below ...
2
votes
1answer
25 views

Problem while using caption for rows of multiple figures in 2 columns and many rows

I have a collection of 10*2 figures which are subfigures of a main figure. I have been able to place them in my Latex document. The result is like as follows: a b c d . . . Figure: 1 (Caption ...
6
votes
1answer
79 views

Changing the font spacing in figure/table captions

I am writing a thesis. Both the body of the text and my figure/table captions are double-spaced. However, I need my captions to be single-spaced. I tried resetting the spacing on the captions using ...
1
vote
0answers
63 views

Long captions causes table to shift incrementally [closed]

I'm having an odd problem where the table shifts incrementally with the caption when the tex file is reprocessed multiple times. Suppose there is a table with a caption that goes over 3-4 lines. In ...
0
votes
0answers
37 views

Table caption in floatrow environment

I am using the floatrow environment to display a figure and a table side by side. Here is my latex code : \documentclass[a4paper,11pt,twoside]{article} \usepackage{floatrow} ...
0
votes
1answer
55 views

In Latex, I want my caption to be lower relative to my figure. How do I do that?

instead of: Figure 1 I want: -------- Figure 1 How do I manipulate this?
3
votes
1answer
23 views

Changing figurename in paper document class?

I am looking to change the figure name and table name for captions in the paper environment. In particular, I'd like to change both Fig. and Tab. to Figure and Table. The question answered here does ...
2
votes
1answer
28 views

How to fix default table number and description separator

I have 2 tables using different packages, but the caption gennerate different: When I use table with tabularx: Table 1 – A simple example When I use longtable: Table 2: A simple example ...
3
votes
2answers
82 views

Align Caption to the left

I am trying to align caption to the left but its coming centered. Please see the figure. The code is \begin{figure}[!t] \includegraphics[scale=0.22]{Figure 1.pdf} \caption{The caption is coming to ...
3
votes
1answer
49 views

I am struggling to get some of my figures labelled as schemes

Underneath some of the images in my document I would like the caption to read scheme1.1 etc. instead of figure1.1, I was wondering if it was possible to do this selectively as I use Chemdraw to draw ...
3
votes
1answer
102 views

tikz legend in caption and colorbrewer

Related to the question tikz legend in caption I want to use the colorbrewer library (just unzip the archive in the working directory). However, it seems that they cannot be used together. ...
4
votes
2answers
50 views

Why Strange Formatting For My Caption

I am trying to include an image with a nice caption below it. I have the following: \documentclass{article} \usepackage{graphicx} \begin{document} \begin{figure}[h] \centering ...
0
votes
1answer
74 views

\vspace not working as expected

I have a code block using minted and mdframed and a caption afterwards. \begin{mdframed} \begin{minted}[tabsize=4]{c++} some code \end{minted} \end{mdframed} \begingroup\captionof{listing}{some ...
1
vote
1answer
60 views

latex files generated by tikzdevice leaves large space between image and caption

Ive been using the tikzdevice package in R to generate latex code of my plots, I've noticed that it always leaves a large white space between the caption and the figure itself, here is an example I ...