{captions} is about captions for figures, tables and other, custom-defined floats or non-floating illustrations which are formatted to look identical to these floats. A popular package is caption.

learn more… | top users | synonyms

8
votes
1answer
7k views

subfig caption spacing

How do I reduce the vertical space between a caption of a subfigure and the image of that subfigure? I tried: \subfigure[\vspace{-0.2in} caption words] doesn't seem to do anything.
8
votes
2answers
235 views

Align position of a table exactly to another one

I have a problem. I just made a table which was very wide, so I decided to split it into two smaller ones. Turned out the 2nd half is a little bit smaller in width than the first one. Now I want these ...
8
votes
1answer
4k views

Centering a subcaption

I have three figures that I want to place next to each other. That is fine. In addition, however, each subfigure has a caption on its own and the crucial thing with these is that I have to have two ...
8
votes
1answer
607 views

Controlling the subcaption space in memoir

Memoir provides these two declarations to control the vertical space surrounding a subcaption: \tightsubcaptions \loosesubcaptions I was wondering if there is a way to control this spacing more ...
8
votes
1answer
299 views

Citations in captions as separate argument

Whenever I include a table of a figure in my research papers, I cite the source of the information in the caption itself. However, I don't want this citation to appear in the List of figures/tables. ...
8
votes
1answer
349 views

display the caption of a figure as if it was a subfigure

I know how to use the subfig package to fit many subfigures (each with its own caption) into a larger figure (with a general caption). I know how to use the sidecap package, the put a figure's ...
8
votes
1answer
195 views

subcaption: remove page number from lof

I use the caption and subcaption package as shown in the example below: \documentclass{article} \usepackage{caption} \usepackage{subcaption} \captionsetup[subfigure]{list=true} \begin{document} ...
8
votes
1answer
540 views

Remove footnote marks from \listoftables

I'm using footnote marks in my table captions like this: \caption{This is title\protect\footnotemark with a foot note} and then I just use a \footnotetext{Closer explanation...} . This works just ...
8
votes
1answer
421 views

Produce PDFs with only the figures/tables without captions and with only the captions without figures/tables

I'm submitting the final copy of a journal paper and got the following requirements: Camera-ready copies of all figures and tables in a single pdf/ps file (that is, produce a single ps/pdf file ...
8
votes
2answers
556 views

combining listings and tufte-book, listings caption on tufte's margin

I am not very familiar with all latex details, but I'd like to use the listings package in a tufte-book document. However, the listings package places its captions above or below the listing and I ...
8
votes
1answer
1k views

How to localize label using algorithm and algorithmic packages

I am writing a paper in Italian and I need to include pseudo code in my latex document so I am currently using the algorithm and algorithmic packages. At the top of every algorithm the label Algorithm ...
8
votes
2answers
10k views

How to place subfigure caption on the side?

Is there some way to tell subfig package to place subfigure captions to the left or to the right of subfigures? There is sidecap package which does it for the main captions, but it does not affect ...
8
votes
2answers
708 views

Indent further paragraphs in the caption of a table

I have a little problem how to create a caption to my table. It looks ok as of now, but I would like to indent the heading of a new paragraph. Also right now, I cannot even create a new paragraph ...
8
votes
3answers
4k views

How do I make figure captions span multiple pages?

How do I make figure captions span multiple pages? I have a very long caption for a figure and would like it to carry on to the next page. EDIT: I would like this to work in both one sided and two ...
8
votes
1answer
208 views

Prevent pagebreak between minted and captionof

I know there are already many questions there covering that or at least similar topics. I've read this for example but can't get it figured out... At first here comes my MWE: ...
7
votes
2answers
3k views

Issue with capt-of package

I'm using the capt-of package to create a caption for my figures: \newcommand\figureFrame[4]{% \begin{center} \includegraphics[#1]{#2} \captionof{figure}{#3}\label{#4} ...
7
votes
3answers
3k views

Caption issue when placing figure side by side

I placed 2 figures side by side using the minipage method from this post, and the figures look perfectly fine. However, the caption of the right figure stick out into the margin, why is that and how ...
7
votes
2answers
17k views

Insert figure in a multicol article

I am trying to insert a figure with a caption into a multicol article. When the figure was inserted on its own, it was fine: includegraphics[width=0.5cm]{image} However, when I tried to insert the ...
7
votes
2answers
9k views

How to put two images next to each other with a) and b) labels?

I want to put two images next to each other and in order to do that I have written these code: \begin{figure}[h] \begin{minipage}{16pc} \includegraphics[width=16pc]{P_1.eps} \caption{\label{fig4} ...
7
votes
2answers
166 views

How can I take precise control over the size of caption text of images?

In the caption of the images of my text, the size of the text "Figure 1.1" (and so) is greater than the text itself. The result is How can I take precise control over this text? The code is ...
7
votes
4answers
615 views

Only get filename and extension of listing, not whole path

I am trying to add the file name as caption. I was able to do this setting caption=\lstname but this shows the full path. I am now trying to get the name of the file and extension to show only. I ...
7
votes
2answers
711 views

KOMA script: How to reduce vertical space below caption

The vertical space below figure caption is large how to reduce it. \documentclass[a5paper]{scrbook} \usepackage[demo]{graphicx} \begin{document} \chapter{Sample chapter} \section{Sample section} ...
7
votes
4answers
1k views

Background color for the caption of a listing

I'm considering this piece of code \lstinputlisting[ language=C, breaklines=true, basicstyle=\scriptsize\ttfamily, numbers=none, ...
7
votes
1answer
2k views

How to use color in `caption` package?

I am using caption package to customize captions in my thesis. My current code is: \usepackage[width=0.6\textwidth ,font={small, sf,it},labelfont=bf, labelsep=endash, ...
7
votes
2answers
982 views

How can I turn off table and figure captions?

I am using my figures and tables both in report documents, where I want them to have caption text, an in presentations made with Beamer, where I want them to not have a caption text. I am using the ...
7
votes
2answers
5k views

Horizontal and Dashed lines in caption

What I'm looking to do is caption a graph with something like "It can be seen from x (solid line) and y (dashed line)" Where "solid line" and "dashed line" are replaced by two solid and dashed ...
7
votes
3answers
738 views

How does one create, caption, label and refer to a subfigure?

So its a fairly simple question to a problem people normally experience. I have a rough idea of what to do, but I am looking for the correct way of doing things. So in the solution I will include what ...
7
votes
1answer
6k views

Space after float with [h]

this is my first time here, and I have this question: I'm writing my thesis, that includes many tables and figures in a float environment, with the caption at the end of it. I defined the space ...
7
votes
1answer
2k views

Make Caption of Image longer than Image in Subfloat

I have little icons (48x48) and I want to display them using subfloat. To prevent that images from being pixelated I set the width to 1cm. But now the caption has also a length of 1cm and looks ...
7
votes
1answer
422 views

Using siunitx in captions?

I am using pdflatex(texlive 2011) to compile a document. Unfortunately it does not compile. ! Undefined control sequence. \metre ->\ERROR l.69 ...feld \num{6}{\metre} mal \num{6}{\metre}} ...
7
votes
2answers
2k views

Caption on side by side matrices

I have two matrices side by side, like this: \[ \left[\begin{array}{cc} a & b \\ c & d \end{array}\right] \qquad \left[\begin{array}{cc} e & f \\ g & h ...
7
votes
2answers
2k views

How to put the url centered under the caption of a figure?

I would like to put a source under the caption of my figure. The only thing that is not working is when I put the URL, the caption and the URL don't stay in the middle. Also \url{...} didn't work by ...
7
votes
2answers
4k views

How do I format subfigures captions using memoir?

I switched to using the memoir class and stopped including subfigures. All of my subfigures now interpret the caption as actual text, i.e. as [caption...], which shows up in the document with the ...
7
votes
2answers
5k views

Width of the caption of a figure

I am having trouble making the caption beneath a figure to be of same width of the figure (less than the width of the paragraphs in the same page). How can I force the caption width to be the same as ...
7
votes
2answers
2k views

The caption package and letterspacing

Problem Statement I adjusted the caption format for my figures and tables using the caption package, such that the words "Figure" and "Table" are typeset using small caps. Now I want to obtain ...
7
votes
1answer
5k views

How do I put two footnotes in the caption of a float?

This question Using \footnote in a figure's \caption already has some suggestions on how to get a footnote in a caption. None seem really satisfactory because it seems hard to get the footnote ...
7
votes
1answer
3k views

scrreprt – How to adjust distance between caption and table?

I am new to LaTeX, tentatively using it to prepare a complicated industrial document (laboratory test report). I had selected the report class. After numerous experiments, I have just found that just ...
7
votes
1answer
958 views

Caption placement for new float in tufte-book class

I am using the tufte-book document class and I am trying to create a new float environment for example boxes that will include captions in the right margin similar to table/figure captions. However, ...
7
votes
3answers
4k views

How to redefine the caption command with optional arguments

I'm writing a thesis that has double spacing on by default throughout the document. However, captions on figures need to be singlepaced. I can do that like this \normalsize \singlespace \caption{ ...
7
votes
1answer
106 views

I redefined \- but it does not work in captions

I defined \+ and \- macros for conveniently entering notation. Surprisingly, I noticed that in table and figure captions \- does not work while \+ works. (The same problem appears also in the content ...
7
votes
2answers
2k views

Table caption not appearing in PNAS document class

I am unable to get table captions to show up when using the PNAStwo document class from 2008 (the latest version includes printer marks that I do not want). The documentation says "Figure and table ...
7
votes
1answer
3k views

Raggedright and caption package

I am trying to format my tables and figures' captions with the caption package. What I want is the caption label separated from the caption text by a new line and both of them completly to the left ...
7
votes
2answers
8k views

Figure and Table next to each other (memoir class) [duplicate]

To save space, I would like to place the following table next to each other. Each has a separate caption. I have this, I want this, Sample code, \documentclass[]{memoir} ...
7
votes
1answer
20k views

Setting font size for caption package

I wish to set the font size for caption package, how should I do it, now I have this in my preamble \usepackage[skip=2pt]{caption}
7
votes
1answer
6k views

Algorithm Caption

I want algorithm to NOT show the number in caption. How can i do that? Below is the code: \begin{algorithm} \begin{algorithmic} \caption{ My Algorithm} \IF \ELSE \end{algorithmic} \end{algorithm} ...
7
votes
2answers
751 views

Subfloat indexes misaligned when using setcaptionwidth

I have the following document: \documentclass{article} \usepackage{subfig} \usepackage{graphicx} \usepackage{geometry} \setcaptionwidth{12cm} \begin{document} \begin{figure}[t] \centering% ...
7
votes
3answers
221 views

Formatting figure captions overlayed with TikZ

I am using full-page figures as cover images for chapters, see Marginless full page figure with caption overlay magazine-like. However, I am unsatisfied with the format of the caption. The following ...
7
votes
1answer
202 views

How can I make the width of the caption match that of the listing?

How can I fix the captions width to match the listing? As in the picture below: Code is here: \documentclass{article} \usepackage{xcolor} \usepackage{listings} ...
7
votes
1answer
286 views

Redefine figure counter with scrbook

I am using the scrbook (KOMA Script) class, as this MWE shows: \documentclass[11pt,a5paper,twoside,BCOR=8mm,DIV=12,headings=normal,open=right]{scrbook} \usepackage[ngerman]{babel} ...
7
votes
1answer
152 views

How to change the order of words in a caption?

I'd like to change the order of word in the captions of figures and tables. Instead of Figure 1 , I'd like to use 1. ábra. How can I do this? Thank you in advance