4
votes
2answers
64 views

Change numbering level for one chapter only

Apologies if this is duplicate but couldn't find it. I have a document using amsmath for chapter, section & subsection numbering, & everything (theorems, lemmas etc) uses the same numbering ...
2
votes
1answer
69 views

Adding different entities to a table of contents, part 2

This is a follow-on to the question: Adding different kinds of entities to table of contents As I build a huge document, things don't work as in the MWE from the previous problem. I stripped out the ...
3
votes
2answers
55 views

(lyx) Chapter Number after Part Number (Chapter 4.4 instead of Chapter 4)

I know its counter-intuitive and doesn't make any sense at all, but bear with me. I am using the classic thesis style (in lyx), and the recommendation of my university ask me to do so. So currently My ...
3
votes
1answer
80 views

Table of contents: Include part number for chapters entries

I have the following code \documentclass{scrreprt} %\usepackage[titles]{tocloft} %\renewcommand{\cftchappresnum}{\thepart.} \begin{document} \tableofcontents \part{First Part} ...
7
votes
1answer
276 views

“Literal” numbering of chapters

I'm finishing a book, and I want the first page of each chapter to begin with the literal numerotation: Chapter one ... Chapter two ... chapter three etc. I've seen it in several ...
1
vote
1answer
62 views

Skipping Chapter numbering but getting the Chapter layout

I'd like to set up the structure of my report as follows. Different chapters should have a nice big heading, like the one of the Chapter environment, and should be separated in the table of contents ...
3
votes
1answer
91 views

Prepend different stuffs to starred and unstarred \chapter commands

For the unnumbered sections units of documents built with a personal class (which inherits from the book class), I'd like to use: not the starred form of the corresponding commands, instead the ...
4
votes
2answers
162 views

Show Chapter and Page Number in List Of Figures

I am creating a document framework for my mini-dissertation. The document will consist of multiple chapters. In each chapter the page numbering will start at 1. This is achieved by using ...
2
votes
0answers
123 views

\usepackage[Glenn]{fncychap} and missing numbering [closed]

I created my thesis using \usepackage[Glenn]{fncychap} for chapters. Sadly not all chapters of the parts are numbered. It's quite odd that in part I, chapters 1-2 are numbered but 4-5 are not. In part ...
2
votes
1answer
165 views

Sections without chapters in a LaTeX document [duplicate]

I have a document generated by doxygen with just \section directives and no chapters, so they're getting numbered as 0.1 Section 1 0.2 Section 2 0.2.1 SubSection 1 How can I skip the chapter number ...
0
votes
0answers
75 views

Chapters numbering

A question about chapters numbering and the ToC. I do this: \include{disclaimer} \include{dedication} \include{epigraphe} \include{ackno} \include{abstract} \setcounter{page}{1} ...
12
votes
0answers
184 views

“Chapter 2 1/2”: Custom Chapter Number [duplicate]

I'm copying to LaTeX my notes on Maths subject. My professor is quite weird, and "invented" a Chapter 2 1/2 (two and a half) between chapter 2 and chapter 3. For example: Chapter 2 Vector spaces and ...
3
votes
1answer
77 views

Update references and labels of equations after changing the order

This seems again trivial, but I cannot find any solution to my problem in the questions that have been asked on referencing. The issue can be explained easily: I am making a document with many ...
0
votes
0answers
40 views

How do I remove numbering from the chapter titles? [duplicate]

At the moment I get this: 1 Chapter 1 1.1 Subsection I would like to remove the number preceding the Chapter 1 part to give: Chapter 1 1.1 Subsection
4
votes
2answers
483 views

Move chapter number to chapter title in classicthesis

I'm using classicthesis 4.1 in LyX to write my thesis and I need help to relocate the chapter number. The top half of the image shows what I have The bottom half shows what I want:
8
votes
2answers
224 views

Multiple appendices, distributed throughout document

For my dissertation, I have multiple parts to represent each separate paper. I'm trying to get the appendix for each part to follow the part, and then have chapter numbering reset to 1 (rather than ...
3
votes
1answer
104 views

Table numbering in unnumbered chapters (e.g. \chapter*)

I've tried to google this in about a dozen different ways, but didn't find anything. I have an introduction chapter that uses \chapter*. The numbering of the subsections is fine - they're still ...
3
votes
1answer
229 views

Chapter redefinition

For a system userguide, I have to follow a style guide. This style guide imposes me to have : Chapters title in TOC without number neither word 'chapter' (in TOC and in the text) In the text I have ...
7
votes
1answer
826 views

Chapter number starts at 2 not 1

How can I start my chapter from "Chapter 2" instead of "Chapter 1". I am preparing LaTeX document for each chapter. when I put \chapter{Introduction}, it produces "Chapter 1" Introduction. However I ...
3
votes
1answer
425 views

Display appendix chapter like: “Appendix”, and sections like “Appendix A: My appendix title”

I wish to make my appendix chapter like: "Appendix", and sections like "Appendix A: My appendix title" "Appendix B: My second title" by writing: \chapter{Appendix} \section{My appendix title} ...
0
votes
0answers
50 views

Is it possible to remove chapter number from align environment? [duplicate]

Basically I have written a proof using the align environment in a new .tex file and the numbers in the proof came like this (how I want them): Line1 (1) Line2 (2) Line3 (3) Now I've ...
7
votes
1answer
164 views

Dividing chapters into ch. 1, ch. 2a, ch. 2b, ch. 3 etc

I'm typesetting a book and one of the chapters separates into two chapters so I need it to count like so: chapter 1 --------- chapter 2a ---------- chapter 2b ---------- chapter 3 --------- ...
2
votes
4answers
15k views

How to remove chapter numbering without removing it from tableofcontents

It seems I have a two day trying to find out the solution of my problem. I have just finished typing my M.Sc thesis using LATEX (MIKTEX 2.9). Unfortunately, all my chapters begin with the chapter ...
3
votes
1answer
68 views

Last chapter number

Is there a way similar to what is achieved by the lastpage package to get the Last Chapter number? I would then like to use this information to design chapter headings.
3
votes
1answer
114 views

Initial and final chapters appearing in the table of contents without numbering

I'm editing a document whose preamble starts with \documentclass [12pt, a4paper]{extbook} I wish the chapter 'Introduction and its sections' appear in table contents at the beginning of the text ...
4
votes
1answer
499 views

How to display Arabic numerals with \ref but Roman numerals otherwise?

To show all chapter numbers as Roman numerals, I’m using \renewcommand\thechapter{\Roman{chapter}} The fourth chapter, for instance, is therefore “Chapter IV” everywhere. Is it possible to show ...
4
votes
1answer
173 views

Fit the height of the chapter number to n-times the height of the chapter name

I would to get the chapter number tall n-times the chapter name in order to have a better proportion between the two elements. Why I get errors and how can I fix that behaviour? I thought something ...
5
votes
1answer
364 views

Numbering to start from section not chapter

I want chapters not to have any numbers (both in the text and in the table of contents) and the numbering in each section to start from 1. For example (both in text and toc): Introduction 1 Section ...
6
votes
1answer
1k views

How to move chapter number in classicthesis class

I am using classicthesis for my thesis. In each chapter LaTeX puts its number, but I need to move it. Here you have an screenshot example, in this image I wish to move "4" number to the left.
1
vote
1answer
420 views

Remove chapter number on algorithm numbers (scrbook)

I write my bachelor thesis using a document class provided by our institute based on scrbook. I write pseudo-codes using algorithm2e which I put in the appendix since otherwise they would "interrupt" ...
9
votes
2answers
630 views

Header not displaying correctly on chapter page due to subsection

(Complete source code below.) (Note: Not sure if I am using LaTeX or just TeX. I am editing with TeXworks, as TeXStudio was not rendering what I typed without +20 seconds of lag.) I apologize if ...
4
votes
1answer
75 views

Negative or zero chapter number not appearing in list of figures (lof)

Usually figures 1,2,3 of chapter n appears as "n.1, n.2, n.3" in main text and in List of Figures (lof) but this format is not respected if n <= 0, in this case figures appear simply as "1, 2, 3" ...
4
votes
1answer
959 views

How to design a nice looking chapter title and page

I want to create something like the images I have below: ( I couldn't draw well the chapter number and its font) and ( I couldn't draw well the page number) --------------UPDATE According to ...
8
votes
1answer
550 views

\part and \chapter commands output both numbered and named headings

I have the following LaTeX document being compiled in TeXstudio 2.3 on Windows 7 (mode is PdfLatex + PdfViewer): \documentclass[a4paper,12pt]{report} % Modified \part and \chapter from report.cls ...
1
vote
0answers
130 views

General help with 'report' chapter numbering and bibliography [closed]

I've slightly 'inherited' a set up from another document and it's not behaving as I'd wish right now... Here is the preamble, \documentclass[a4paper,11pt,twoside]{report} ...
8
votes
2answers
1k views

Omitting chapter numbers in section headers using memoir

I'm trying to find a way to remove the chapter number from the section headers when using memoir. Right now I'm using parts, but no chapters and zeroes appear in front of all section numbers. I tried ...
5
votes
3answers
1k views

How to reset footnote numbering at \chapter* and at frontmatter chapters?

A comment to my answer to Biblatex and citation reset between chapters made me realize that, contrary to normal chapters in the book and report class, \chapter* (the starred version) does not reset ...
12
votes
1answer
706 views

Biblatex and citation reset between chapters

I have a feeling that there is an obvious answer to this question that I'm somehow managing to miss. However, I've tried most of the commands in the biblatex documentation and I still can't figure it ...
1
vote
1answer
149 views

Error in numbering theorems in section zero of a chapter in report

I'm writing a multichapter report and I'm having a problem with the theorems being numbered correctly of section zero of a new chapter. For instance, chapter two ends with Corollary 2.3.21 and ...
3
votes
2answers
895 views

Chapter without number in memoir

I want one of the chapters in my memoir book to be unnumbered. I want it to have a chapter heading, show up in the table of contents, etc.--the only difference being that it is not given a number. ...
8
votes
3answers
1k views

Adding numberless chapters to the table of contents

How do I include a chapter reference within the table of contents without giving it a chapter number? I am using the report document class. Normally, I would create a chapter as follows: ...
1
vote
3answers
163 views

labeling tables per chapter both in the body and in toc [duplicate]

Possible Duplicate: Continuous v. per-chapter/section numbering of figures, tables, and other document elements How can I label the tables per chapter in document class report rather than ...
9
votes
3answers
2k views

How to change the chapter number to display as text (One, Two, …)?

In LaTeX, how do I change the chapter number to display as text? eg: CHAPTER ONE not CHAPTER 1; CHAPTER THIRTEEN not CHAPTER 13.
6
votes
2answers
3k views

Chapter title without number

Now that I have turned numbering on, \leftmark shows chapter title with number in my header. like 1 ChapterTitle How do I remove the number? these are my settings ...
8
votes
2answers
297 views

French chapter numbers

This question led to a new feature in a package: impnattypo French typography recommends that chapters be numbered in uppercase roman numbers, except for chapter 1 which should be called ...
5
votes
4answers
2k views

How can I produce an unnumbered chapter for the introduction?

If I did \setcounter{chapter}{-1} \chapter{Introduction} then I get Chapter 0 Introduction. I just want the word Introduction, and I want it also in the contents when I use \tableofcontents How ...
2
votes
1answer
89 views

How can I include bibliography into numbering?

\documentclass[12pt,a4paper]{mwrep} ... \chapter{First chapter} ... \chapter{Another chapter} ... \begin{thebibliography}{999} ... \end{thebibliography} I have in ToC: 1. First chapter ....... 1 ...
9
votes
2answers
8k views

One chapter without numeration

How can I make one chapter (Introduction) without number? I have: \documentclass[12pt,a4paper]{mwrep} \chapter{Introduction} \chapter{Chapter 1} \chapter{Chapter 2} In ToC I have: ...
3
votes
1answer
549 views

Each chapter with own contents? [duplicate]

Possible Duplicate: List sections of chapter at beginning of that chapter I'm wondering whether its possible to have each chapter of a thesis with its own contents page? I tried it ...
6
votes
2answers
1k views

Adjusting the postion of chapter numbers in the Tufte-Latex class

I'm using the Tufte-latex book class, and trying to figure out how to use numbers in the chapters/sections. The default style has no numbers, which I turned off by commenting out this line: % Turn ...