{chapters} is about the \chapter command which is one of the sectioning commands forming the logical structure of documents. This tag should only be used *in addition* to the more general {sectioning}.

learn more… | top users | synonyms

1
vote
1answer
19 views

Customizing chapter title code to act slightly differently for table of contents?

I'm using this code to customize my chapter titles: \chapterstyle{default} \renewcommand*{\chapterheadstart}{% \par \needspace{10\onelineskip} \vspace{\beforechapskip} ...
2
votes
1answer
38 views

Don't break page for new chapter unless chapter heading won't fully fit on current page

I am using the memoir class. I'm trying to ensure that new chapters happen on the same page as the last one, except in cases where parts of the chapter heading would have been split across two pages. ...
1
vote
1answer
88 views

Chapter formatting and spacing

I use report document class and the thing is that I would like to change the chapter both in format, letterspace and place on the page. Right now a chapter look like this: I want it to look like ...
-1
votes
1answer
79 views

Page number problem in chapters of my thesis, how to make chapter title page with no page number?

I am working with my thesis. I want all my chapter title should be in single page and in page centered and my first section introduction start on new page, by doing this my chapter title page also ...
2
votes
1answer
45 views

Remove chapter number from memoir class ToC

Is there a way to remove the chapter numbers from a memoir class table of contents? I would like to have the name of the chapter followed by the page number on which it occurs. It would be nice to ...
3
votes
1answer
53 views

Avoid chapter in new page

Hello i would like to prevent the new chapter begins in a new page, i am using memoir class and here is the MWE: \documentclass[french,12pt,openany,oneside,openright]{memoir} ...
3
votes
1answer
30 views

Decouple nomencl from chapter class, to have its own formatting

I'm using the nomencl package to keep track of my abbreviations in my \documentclass{report}, where I am using xelatex to change the font. However, since I've made changes to the way \chapter{} is ...
0
votes
0answers
45 views

Starting chapters on a right-hand page not working

As document class I'm using itsas_pfc, with the content I pasted below. I know it's big but, as I'm not very familar with LaTeX, I dont want to touch a lot the code so better if I post the entire ...
0
votes
1answer
26 views

printbibliography outside of \include{Chapters/Chaptername}

I am using the scrbook class and compiling through PDFLaTeX. I have my document setup such that I include the different chapters that each have their own \cite, but would like to print one ...
0
votes
0answers
50 views

Set Page numbers at Bottom in Memoir Class

I am using memoir class and am getting page numbers differntly positioned for even and odd numbered pages. I am using : \settrimmedsize{297mm}{210mm}{*} \setlength{\trimtop}{0pt} ...
6
votes
3answers
191 views

Number chapters as 01, 02, … , 10, 11, … appendices A, B

Minimal example (the problem is obvious): \documentclass[]{report} \makeatletter \def\@makechapterhead#1{ \vspace*{-5.0em} {\parindent \z@ \normalfont \interlinepenalty\@M ...
4
votes
1answer
40 views

Add a figure on even page before chapter starts

I'm trying to do something very specific and I'm not able to find it on StackOverflow. I'm building a novel, I've set all my chapters, and they always start on the odd numbered pages: PERFECT! That's ...
0
votes
0answers
52 views

Add custom logo before chapters with Pandoc

I want to add a custom image near my chapter headings (using the report documentclass). I want to get something like this: http://tex.stackexchange.com/a/124083/78981 but with the logo above the ...
1
vote
1answer
27 views

Align a chapter* title with a chapter title in memoir

I want to align chapter*-title with chapter-title in memoir, as show in the following +---------------------------------+---------------------------------+ | | ...
2
votes
1answer
87 views

Decorate “Contents” and “listof” pages with TiKZ in scrbook class

I'm using the scrbook class to write a document because of its high flexibility. The problem is when I tried to customize my chapters I succeeded in changing only the mainmatter chapters, but for ...
0
votes
1answer
50 views

Remove Bibliography Title

My document class is \documentclass[a4paper,11pt,leqno,openbib]{memoir}. And my bibliography page is appearing like I do not want the Bibliography heading. Instead I need References heading on ...
2
votes
2answers
110 views

Rename last chapter to epilogue,

First of all: I read through many possible solutions here, but none seem to work for me. I want to rename the last chapter of a book to be named "Epilogue" in the ToC and for all similar purposes AND ...
1
vote
2answers
39 views

Per-chapter page numbers (<chapterPage>/<chapterPageCount>)

I am currently working on a document which needs a header which contains the page number and page count within the current chapter. \documentclass[a4paper,12pt]{scrreprt} ...
1
vote
1answer
44 views

Tracking in chapter titles with titlesec

I've been trying to add tracking (letter spacing) to my chapter titles with titlesec, but to no avail. I'm using fontspec and XeTeX, so microtype isn't available to me. Another post said this can be ...
0
votes
0answers
29 views

Chapter without numeration, page break and included in table of contents

I work on my bachelor thesis and i have some issues. I need to make chapter "Introduction", that is not numbered, included in the table of contents and doesn't do page break. So on the same page ...
2
votes
1answer
54 views

Adding chapter prefix for Appendix

I am working on a larger report and need help with chapter naming for the appendices. I want to add "Appendix" as a prefix to the chapter numbering for the appendices in my document in the actual ...
0
votes
0answers
74 views

How to “unbold” this?

I am using TeX maker and I am facing a small problem. What I am doing is I am including my abstract that is already found on another .tex file under the name (abstract.tex). Now the thing is my ...
2
votes
1answer
93 views

Centering chapter titles

In the MWE below. What is the most convenient way to center the titles Preface and Abstract, rather than setting them flush left? \documentclass{book} \begin{document} \chapter*{Preface} ...
1
vote
1answer
43 views

Height chapter number or height chapter name in memoir

I use memoir class. I want add some vertical space before chapter name or chapter number. I got that with \beforechapskip command, but this way add a fixed vertical space for all chapters. There are ...
1
vote
1answer
101 views

How to adjust line spacing in wrapped chapter lines with KOMA-script?

I'm using scrbook. Some chapter titles are long and wrap, some of those even twice. When it goes on the third line, the spacing is different than that between the first and second lines. Looks ...
2
votes
1answer
63 views

How to get rid of the “chapter” word with \leftmark?

I'm using fancyhdr to make customs headings and I would like to know if there is a way to get rid of the "chapter" when I use \leftmark in my header ? The document is in oneside report. Thanks !
6
votes
2answers
307 views

KOMA-Script: How to style the title of a chapter

How does one apply a custom styling to the chaptertitle in KOMA-Script? I know about the existence of the titlesec package but I've read that it doesn't play very well with KOMA-Script which outputs a ...
1
vote
1answer
45 views

Change ToC to \section instead of \chapter

I'm using the report class, and because of this, my table of contents is also displayed as a chapter (i.e. using a chapter heading for "Contents"). This is overly large, and just causes my ToC to wrap ...
1
vote
1answer
36 views

How to change justification of chapter and chapter title?

I am using the report package for writing my project report. However, I need to make few changes in the report package in order to meet the university guidelines. Currently I am facing difficulties in ...
0
votes
2answers
46 views

Changing the position of the Chapter heading

I am trying to alter the chapter heading that is preset in the book template. I have found a style I like from Vincent Zoonekynd’s web-page, http://zoonek.free.fr/LaTeX/LaTeX_samples_chapter/0.html, ...
2
votes
1answer
66 views

Multiple chapters per page, only if they “fit”

I am typesetting a book which has some very short chapters. If two consecutive chapters are short enough, I would like to fit them both on the same page. Otherwise, the next chapter should always ...
1
vote
1answer
65 views

Formatting Chapter Headings

I am using documentclass book and generating short chapters (one or two pages each). The chapter headings use too much space. I want the title at the top of the page, not pushed down. I reduced ...
2
votes
1answer
73 views

What is the command for writing out the chapter name in the memoir class? [duplicate]

Say I have \chapter{Test Chapter} in my document, and I want to insert the title of the chapter into some code or into the text further down the document, what is the command for inserting the ...
2
votes
1answer
142 views

Redefine chapter title appearance with arsclassica

\newcommand\Chapter[2]{ \chapter[#1: {\itshape#2}]{#1\\[2ex]\Large\itshape#2} } don't function for a result like this: My code: \documentclass[10pt,% % corpo del font ...
1
vote
3answers
39 views

custom chapter numbering with decimals

I would like to start a report with the Chapter 3.6 (and consecutive) until 3.9. I have been looking for these types of commands, but they are not working as I want. Please help
2
votes
1answer
57 views

Make only one page for each chapter

Is it possible to generate only one page per chapter(or section) without splitting the document file? The page width is fixed but the page height should be automatically adjusted by the content ...
7
votes
2answers
192 views

Giant number next to chapter title

I want to make chapter titles that look something like this: I'll be using a different font, but the idea is the same. If possible, I'd like it to work like this: Pick the size of the number ...
2
votes
1answer
92 views

LaTeX report - table of contents without chapter

I am trying to write a LaTeX report (using class report) but I don't want to use chapters, only sections, subsections and subsub. Using \renewcommand{\thesection}{\arabic{section}}, my sections ...
3
votes
1answer
176 views

What is the name of the variable containing the current chapter title?

Consider a chapter in a french book defined by: \chapter{Blablabla} It will generate the output: Chapitre I : Blablabla Then, we have the following variables: \chaptername corresponds to ...
0
votes
1answer
35 views

chapter headings change alignment to center and without the word “chapter”

I want chapter heading as 1. chapter_name and center aligned. How can I get this? I have searched the net for an answer but I am able to get only separate answers but not combined answer for the both ...
2
votes
2answers
56 views

How to add new chapter to an existing project?

Im new to the LaTeX. I'm working with the existing project, but now I want to add a new chapter to it. The document class i'm using is book. Please help me.
2
votes
3answers
79 views

Removing the word “Chapter n”

So I am trying to remove the words Chapter n, and replace it by the chapter title. BUT I want it to show up in the table of contents... (So I cannot use \chapter*{...}). Is there a way to achieve ...
3
votes
0answers
47 views

Including chapter as a separate TeX file [duplicate]

I am trying to include a separate TeX file that will contain the text of a chapter, however when I try to point the main TeX file to the chapter TeX file, there is an error which claims to not be able ...
5
votes
2answers
109 views

How to use this chapter style such that it takes up less space?

I like the box chapter style from here: http://hstuart.dk/2007/05/21/styling-the-chapter/ Here is a MWE based on this style: \documentclass{memoir} \usepackage{tikz, blindtext} ...
2
votes
1answer
40 views

How do I change @makeschapterhead to center the title of chapter?

I redefined \@makechapterhead to short the space after and before a chapter title, but i don't know how to center it... any help? \makeatletter \def\@makechapterhead#1{% %%%%\vspace*{50\p@}% %%% ...
4
votes
2answers
80 views

Import \chapter into amsart

I would like to create a document with the appearance of amsart, but with added \chapter command (styled as in amsbook, or differently). How can I do that? I tried to make LaTeX load both amsbook and ...
0
votes
1answer
64 views

How do I get rid of the Chapter title? [closed]

I am using document class {book} and I want to get rid of the chapter titles. I don't want them to show up at the beginning of the chapter, but I do want the name of the chapter to still show up in ...
2
votes
1answer
94 views

Fancyhdr - No “Chapter” Word, but part number

I am having trouble defining my headers with the fancyhdr package. Here is what I want : - on the left page, on the left side : partnumber.chapternumber. Chapter Name - on the right page, on the right ...
3
votes
2answers
47 views

Package changes horizontal pipe to horizontal for chapter formatting

I need to change the style of my chapters to a different one. I found a package which would do that, and it works nicely. However, my code before the edit was like this: ...
3
votes
1answer
62 views

shaded letters in chapter [closed]

This week I have wrote this word : \documentclass{book} \usepackage{xcolor} \definecolor{Monvert}{RGB}{229,36,36} \definecolorseries{MONVERT}{rgb}{last}{Monvert}{black} ...