Questions tagged [chemstyle]
Chemstyle is a successor to the rsc package bundle, and provides a system for formatting chemistry documents according to the conventions of a number of leading journals. It also provides a number of chemistry-related macros.
63
questions
2
votes
0
answers
101
views
chemnum: compound referencing in scheme not possible using EPSF-3.0
Using the chemscheme and chemnum packages, I would like to number compounds in a chemical scheme as described in: https://www.overleaf.com/latex/templates/automatically-numbering-compounds-in-chemical-...
7
votes
4
answers
265
views
Variable number of repeating command in macros
I am quite new to Latex and for the past few days I have been struggling to create a macro to insert schemes with labels. I use .eps files for my schemes which include a temporary marker that is then ...
1
vote
1
answer
82
views
Left justified table captions with threeparttable and chemstyle
First post here, be gentle. I have a problem that I already spent countless hours on. I am a Latex newbie, so this is taking me longer than it should.
I want to align a caption on the left with a ...
0
votes
2
answers
172
views
Problem with wrapfigure and chemstyle
I have a problem with wrapping text around figures. The following example demonstrates the problem, the text is not wrapped around the figure. By disabling the chemstyle package, everything works as ...
3
votes
1
answer
163
views
Chemscheme package interferes with captions
I would like a caption to be as close as possible to its figure. This can be easily achieved with \usepackage[skip=0pt]{caption}. However, this solution does not work if the package chemscheme is ...
7
votes
2
answers
5k
views
Chemical standard state symbol with achemso article
I am completely new to LaTeX, but I know how to use the chemstyles package to generate the standard state plimsoll in a document that I am working on for, say, my students, etc. However, for ...
2
votes
1
answer
2k
views
How to write organic chemical equation of the following form
I need to write this transesterification reaction and give it an equation number. How can I do so?
2
votes
1
answer
482
views
\ref{fig:foo} outputs Figure 1 [duplicate]
Since I'm using the chemstyle package by Joseph Wright a reference to a figure, or scheme (a float environment defined by the package) is always printed as:
Figure XY
or
Scheme YZ
Normally ...
0
votes
0
answers
354
views
Custom compound labeling with chemstyle
Even though I made extensive use of the help given from this forum, it's the first time I actually ask a question, so I hope to not mess it up :)
I'm writing my chemistry project proposal with LaTeX, ...
4
votes
1
answer
273
views
Customize title of listofschemes
While trying to customize the title that is printed by the command \listofschemes of the chemstyle package, I have encountered an unexpected behaviour.
To quote from the chemstyle manual:
To ...
1
vote
2
answers
269
views
Problems when using chemscheme/chemstyle with Palatino and T1 encoding
Automatic generation of compound numbers by chemscheme (part of chemstyle) works:
In Latin Modern (lmodern) with T1 or OT1 encoding
In Palatino (mathpazo) with OT1 encoding, but not with T1 encoding -...
1
vote
1
answer
278
views
{chemstyle package} how to reference the graph number label in the text part? [duplicate]
I am using chemstyle or chemescheme package to automatically generate labels of compounds in the scheme. It took me a long time to make it work after I notice that it require --shell-escape to display ...
1
vote
1
answer
140
views
Subfiles compatibility issue with chemstyle package [closed]
I am trying to include subfiles in a large document, one of the child tex files uses schemes to input .eps files from chemdraw, which includes automatic numbering from the chemstyle package.
This ...
0
votes
2
answers
1k
views
Chemstyle: TMP labels not replaced
I am trying to use the chemstyle package but am failing to replace the TMP labels with the automatic label numbers. I could go back to manually editing each eps file and inserting it as figures, but ...
5
votes
1
answer
1k
views
\ref is automatically prefixing the string "Fig." to figure numbers and "Table" to table numbers. Why?
I'm not sure what package I've loaded, but my figures are being printed automatically as "Fig. #", while my tables are printed automatically as "Table #".
Is there a way to just get the number?
...
4
votes
1
answer
487
views
Down arrow with many lines using mhchem package
I am using mhchem package for a chemistry chapter in my document. I have a section in which there is a down arrow with many lines, as shown in image below.
The code for this that I've wrote so ...
5
votes
0
answers
286
views
Chemical compound numbering in pdfLaTeX without `--shell-escape`?
The package chemscheme, included in chemstyle, allows for temporary text "tags" in .eps files to be replaced with designated chemical compound enumerations (A, B, C, ...; 1, 2, 3, ... ; etc.). This ...
0
votes
1
answer
177
views
tilde between Figure (or Table) and number when \ref{...} with chemstyle and babel spanish
When I reference a figure or table in the text using \ref{something} it appears a tilde between Figura (or Tabla) and the number (something like Figura~1), but I realized it's only when using packages ...
2
votes
1
answer
533
views
chemstyle doesn't replace temporary labels
I'm a newby in LaTeX, sorry if it has already been answered but I couldn't find any that works for me. I want to number six different compounds on the same scheme, numbering just besides each ...
3
votes
2
answers
1k
views
Hyperref causes error in auto-pst-pdf (used by chemstyle)
While waiting for useful tips to improve my other question, I'm facing another problem with chemstyle package: the MWE of my other question does work with the explicit [TMP1] optional argument passed ...
3
votes
1
answer
649
views
Chemstyle: redefining schemeref to handle autodeclaration of compounds
This is a follow-up question to Numbering of compounds in the order it appears in the schemes (bpchem or similar)
I had the same problem of the author of the previous question and I tried the ...
1
vote
0
answers
293
views
Numbering chemical intermediate compounds with chemstyle
I´m currently writing my bachelor thesis in chemistry and chose to number my compounds with chemstyle. And except of one little issue that works just fine: Is it possible to number intermediate ...
1
vote
2
answers
1k
views
How to edit scheme numbering in a list of schemes?
I'm using chemstyle to create a list of chemical schemes (within classicthesis), but it numbers the list differently from my lists of Figures and Tables. Is there a way to change, for example, 1.1 ...
0
votes
1
answer
287
views
Error with chemstyle when convert eps to pdf through TEX root - hyperref problem
I'm working on my thesis using chemstyle. The numbering and the scheme work fine in memoir class when epstopdf package is not use. Here's the code that is working.
\documentclass{memoir}
\usepackage{...
4
votes
1
answer
621
views
How to wrap text around chemscheme schemes?
Is \usepackage{wrapfig} compatible with \usepackage{chemescheme}?
I'm using chemescheme to number my compounds, but need to wrap the text around some schemes.
Suggestions?
e.g. (but this doesn't ...
2
votes
1
answer
127
views
Automatically return list of all uses of a command, without repeats e.g. \compound using chemstyle
I'd like to automatically generate a comma separated list of all occurrences in my .tex file of a particular command.
Specifically, I want to ensure the correct numbering of chemical structures using ...
4
votes
1
answer
964
views
How can images be separated from text by a horizontal line?
I would like to arrange my text according to the style used by chemical journals such as JACS.
In there, images are separated from text by a dark blue, thick line from the text (horizontal line with ...
0
votes
1
answer
1k
views
Formatting NMR Data
Hi I am trying to write up some NMR data and would like to be able to make some of the formatting a little simpler to setup.
Looking at this this link here I was able to go through and change the ...
4
votes
1
answer
1k
views
Font of \schemeref labels (chemstyle)
I'm using Chemstyle to label the compounds in my thesis and am using the a \renewcommand to re-size the labels. However, this seems to change the font as well. I need the numbers to be in Arial 8 pt ...
1
vote
1
answer
928
views
Arrow in chemical reaction
I want to write these equations:
I used this code:
\documentclass[12pt,twoside,a4paper,openright]{report}
\usepackage{color}
\usepackage[portuguese]{babel}
\usepackage[utf8]{inputenc}
\usepackage[...
3
votes
1
answer
2k
views
Vertical space between caption and main text
I am trying to adjust the vertical space between my captions and the main body of text below it. It is likely to be packages interfering with each other, but I am not sure which.
Herbert suggested ...
5
votes
1
answer
5k
views
Chemscheme numbering of schemes
I am very new to latex and I am trying to use the chemscheme package to help with my compound numbering (which seems to be working ok so far) but I am having trouble with the actual scheme numbering ...
2
votes
1
answer
153
views
autoref not adding "scheme", when converting .eps with auto-pst-pdf
Problem/Question
I'm encountering problem using \autoref (from hyperref package) to reference a scheme-environment (provided chemstyle package), when using \includegraphics[*]{*.eps} (working with ...
1
vote
1
answer
1k
views
How to place the sub label of a figure to the right using package `subcaption'
I am creating a scheme and I need to add to figures, but I want the figures to have the sub caption to the right, this because my figures could be also seen as equations. I don't know if a minimal ...
4
votes
1
answer
104
views
Changing the whitespace before the List of Schemes header
I'm using chemstyle to create a list of schemes and also tocloft. I noticed that the whitespace above the List of Schemes header is larger than the whitespace above the Table of Contents and List of ...
3
votes
1
answer
899
views
Add text to .eps before adding compound labels with chemstyle
I am writing a chemistry report and I have a few graphs that I need to insert. As the series labels I want to have the compound number (assigned by chemstyle) + some more text. I use ggplot2 to ...
8
votes
1
answer
288
views
\ref shows names of referenced objects
For some reason when I reference something in my text, it also gives the type of object referenced (like Tabel 1, instead of just 1). I understand, that this is not standard latex behavior, but I do ...
2
votes
1
answer
844
views
Errors using chemstyle in LaTeX [closed]
I am a total novice with no TeX or programming experience, trying to learn how to use LaTeX in general, but specifically attempting to use the 'chemstyle' package, so as to allow for automated ...
8
votes
2
answers
7k
views
"shell escape" is not enabled - chemscheme/chemstyle
I am having issues with -shell-escape. I do not know really what this is, and how to apply it. Furthermore, I have read elsewhere that I is possibly dangerous to summon this command. Any help would be ...
2
votes
0
answers
429
views
Chemstyle creates export error [closed]
So I finally got everything working after having to add several packages I never thought I'd have to. Live preview shows a perfect manuscript, but for some reason, when I go to export, I get this ...
4
votes
1
answer
2k
views
How to start chemical compound numbering in main text, not table of contents [duplicate]
Possible Duplicate:
Chemcompound package : how to avoid the listoffigures scan ?
I am writing my chemistry dissertation with LaTeX, and I am using the chemstyle package to automatically number ...
1
vote
0
answers
132
views
Need chemnum style, but have the old TeXLive2009 version [closed]
First of all, I am a total beginner with both LaTeX and Ubuntu (and I have no clue about programming etc.), so please explain things in a way that I can follow and thanks in advance for your help and ...
5
votes
1
answer
730
views
Modify \listofschemes output to match memoir class
I am using the memoir class with the chemstyle package. I just observed that the output from my \listofschemes command has a different indentation and format than my \listoffigures output.
I tried ...
2
votes
1
answer
701
views
How to change fontsize of \cmpdref
I was using chemstyle package, but for some utilities I moved to chemnum. With chemstyle I used
\renewcommand*{\schemerefformat}{\fontsize{8pt}{8pt}\textbf{}}
in order to reduce the font size of ...
5
votes
1
answer
2k
views
Numbering of compounds in the order it appears in the schemes (bpchem or similar)
I am using chemstyle and bpchem to number my compounds. I save my chemdraw drawings as eps and use TMP and TMP2 as markers that will replaced by the compound numbers. As long as \CNlabel is used ...
1
vote
2
answers
2k
views
Problems with numbering compounds using bpchem
I have a problem numbering my compounds using bpchem in chemstyle. In the eps files, I use TMP and TMP2 etc, when I insert the figure, I do it like this:
\begin{scheme}
\begin{center}
\...
2
votes
1
answer
306
views
Why does chemstyle display 'TMP1' rather than compound numbers?
The minimal document below compiles fine but the compound number in the scheme in the PDF output still says 'TMP1' rather than the desired '1'. I drew the scheme in chemdraw, used Helvetica for the ...
3
votes
1
answer
430
views
Image scale won't work with \includegraphics
\documentclass{article}
\usepackage{chemstyle}
\begin{document}
\begin{scheme}[ht]
\includegraphics[scale=0.8]{schemes/lab1}
\caption{Experiment 1 reactions and mechanism}
\...
3
votes
1
answer
1k
views
Subnumbering in chemstyle
When I use \schemeref and \schemerefsub, instead of 1 and 2a 2b I get 1 and 1a 1b. So my subnumbering doesn't seem to follow my regular numbering, but when I refer to the compounds I get 1 and then, ...
36
votes
5
answers
96k
views
How do I get "et al." to appear in italics when using \textcite or \citeauthor with biblatex
I'm using biblatex with the chem-rsc package option. I sometimes make use of the \textcite{<key>} or \citeauthor{<key>} commands to put the authors' name into text. When there are many, ...