The tag has no usage guidance.

learn more… | top users | synonyms

1
vote
1answer
30 views

Curved arrows between two circles

I'm wondering if it's possible to make this sort of diagram in Latex: This question seems like a good place to start, but I don't see how to replace the nodes with circles. Also, I couldn't find ...
4
votes
3answers
200 views

How to make a circle the same size as \otimes?

I would like to make a circle the same size as \otimes (but without the \times symbol in it). It seems that \circ is too small, and \bigcirc is too large.
1
vote
2answers
77 views

How to add 25/50/75/100% filled circles to a table?

Often I see in a paper a table with a column of circles which are filled for 25/50/75/100% to show priority/level of meeting requirements, to mention yes/no/unknown/NA etc? Do such (usage of) ...
4
votes
3answers
71 views

Custom label circle at specific degree intervals

In order to draw a circle with numeric labels at specific degree intervals, I use the following code. \documentclass{standalone} \usepackage{tikz} \begin{document} \begin{tikzpicture}[line ...
8
votes
2answers
316 views

Want to Draw circle with sector and segment

I am able to draw a simple circle. \documentclass{minimal} \usepackage{tikz} \usepgflibrary{shapes} \begin{document} \begin{tikzpicture} \draw (10,0) circle (3cm); \end{tikzpicture} \end{document} ...
7
votes
1answer
167 views

Drawing a circle on non-plane in 3d - Tikz

So I'm trying to draw a circle in a nonstandard plane with TikZ, but can't seem to find any documentation. I originally tried what was found here: Drawing a circle on a non xy-plane with TikZ But this ...
4
votes
1answer
102 views

How to draw a circle with the length of a segment?

Previously I posted a question and one answer brought me another question. Here is the code: \documentclass[margin=10pt]{standalone} \usepackage[utf8]{inputenc} ...
2
votes
1answer
69 views

Draw lines in three intersected circles

I am new user of LaTeX. Kindly can some one please help me out on how I can draw these lines in circles from center to the boundary of circles? The fourth line coming from outside should be an arrow ...
3
votes
2answers
108 views

How to draw points on a circle (chords) and connect them Like the following picture?

I want to draw circles like the above picture and I also want to draw mroe than two dots and more than two chords. Can someone provide me with one simple example for the circle with two dots and ...
4
votes
1answer
95 views

Drawing dashed circles around words using TikZ

I am looking for a code to create the following schemes. As I have never worked with drawing packages in LaTeX before, any help will be appreciated. It would be great if someone could help me by ...
0
votes
1answer
39 views

How to insert a mindmap with TiKZ in a A4paper

I need to create a mindmap by LaTex. After rading the manual, I made the mindmap below as changing an example. \documentclass[article, 12pt, oneside]{memoir} \usepackage[a2paper]{geometry} ...
4
votes
2answers
93 views

Circle two terms in an equation linking them by an arrow

I'd like to know if it's possible to do something like that in an equation using beamer
3
votes
1answer
84 views

Tikz circle diameter when letter inside?

I have the following tikz code: \tikzstyle{city} = [draw, fill=white!20, circle, node distance=0.5cm] \begin{tikzpicture}[baseline={(current bounding box.center)},node distance=0.7cm] \node [city] ...
8
votes
4answers
327 views

Color specific sections of three concentric circles

I'm trying to recreate the following image with TikZ: (Please ignore the sections in black, I just messed it up. Some are correct, others not. I'm looking for an generic answer for any case.) I've ...
3
votes
3answers
60 views

Point object distorted because of proportions command

I'm struggling with my first Tikz graph. I would like to plot a circle in the coordinate (20.48,0.6358) which corresponds to a minimum. However, given that the axis have different scales ...
1
vote
1answer
58 views

How could text be placed at different points with respect to a TikZ circle path?

I have the following code which generates a little circle of circular images using TikZ. How could text be placed at different points with respect to this circle? Specifically, how could some text ...
1
vote
1answer
189 views

Drawing a circle around text within itemize and enumerate on a beamer slide

I have the following code that defines a single frame of a beamer presentation: \begin{frame}{Focus on Merkel Cells} \begin{itemize} \item \textbf{1875}: Merkel cells discovered by Friedrich ...
22
votes
3answers
857 views

Draw a progress circle around text

I would like to draw a circle with a border containing two colors. One color should be the base color and the second color should fill up the border up to a certain percentage. For now I am only ...
2
votes
1answer
76 views

A simple cycle with text instead numbers

can somebody help me to replace numbers to any text in the following graph: % A simple cycle % Author : Jerome Tremblay \documentclass{article} \usepackage{tikz} \begin{document} \begin{tikzpicture} ...
3
votes
3answers
421 views

how to shade portion of a circle using Tikz?

Could you show how to shade regions within circles using tikz?
3
votes
1answer
116 views

Colored circles from data

I have a data file which gives x-position (xpos), radius, and color. I wish to draw a circle at ever (xpos,0) with appropriate radius and color. How do I achieve that? I have used two approaches. ...
2
votes
1answer
208 views

Tikz Circle Divided into Quadrants

I'm trying to create a circle, divided into four quadrants by a dashed "cross", where the top slice is slightly smaller than the bottom slice. I want to label the four quadrants with labels a, b, c, ...
3
votes
1answer
66 views

Drawing two TQFT diagrams (a circle and a loop) using xypic

I have been searching online the last few hours and how do you draw the following two diagrams using xypic? I used the following but the circle looks too small. Thanks in advance! ...
2
votes
3answers
358 views

Venn diagram with customized colors in overlapping regions [duplicate]

I actually want to reproduce the following Venn diagram: For this, it is important that the central overlapping zone is yellow; it would be nice to reproduce the other overlapping colors too... ...
3
votes
1answer
112 views

Adding a circle to a section title

I want a circle around a roman numeral inside a section title. A command \circled is made from: \documentclass[11pt,a4paper]{article} \usepackage{tikz} ... %Circle around characters ...
6
votes
1answer
449 views

How do I draw a circle around a term in an align* equation?

Here's what my equation looks like; it's in an align* environment: I want to put a circle around $\varepsilon \frac{dL}{d\varepsilon}$ and everything else unchanged. Q: How do I draw a circle ...
2
votes
1answer
104 views

Family Tree gone “wrong”

Trying to make a simple tree, but when I finished I realized I'd gone about it totally the wrong way... Would appreciate some help trying to make this the "correct" way. Oh, and also to circle the ...
5
votes
1answer
256 views

Five percent circle with fuzzy edge using tikz

Consider the following code: % DOCUMENT TYPE \documentclass[12pt,a4paper]{article} % PACKAGES \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage[english]{babel} \usepackage{lipsum} ...
3
votes
2answers
200 views

Monte Carlo Method Drawing

I would like to produce a Monte-Carlo-Plot with tikz and pgfplots, similar to this: I've already tried to adapt from this thread: Filling specified area by random dots in TikZ I've tried defining ...
2
votes
2answers
163 views

Help with an easy tikzpicture (mathematical proof)

I'm completely lost trying to make this (I guess) rather easy picture. Any help would be greatly appreciated
1
vote
0answers
43 views

Help in shadow of cycles

want to know how do I make the shadow of cycles \usepackage[tikzpicture] \begin{document}[article \begin{tikzpicture}[x=\imagescale ,y=\imagescale] %posicione a imagem ...
5
votes
1answer
134 views

How to circle one part in an electric circuit?

I am working in this circuit. I need to circle a part of it, but even after search I could't see how to do it. The code is: \documentclass[11pt]{article} \usepackage{circuitikz} ...
3
votes
1answer
72 views

tikz circle with number change vertical space between lines

Arg, i try to replicate the diverse answers using tikz i read into this post and in this post, without success, my circle explode the space between lines. Don't understand why the result is ...
2
votes
1answer
129 views

How can I parametrize two tikz circles to fit tufte marginpar?

Ho can I parametrize the circles to fit the tufte marginpar? I want to able to change the sovrapposition of the circles (possibly in ratio from 0 to 1) and get an adjusted \diameter to fit ...
2
votes
1answer
160 views

How to circle multiple cells? (special case)

I need to circle multiple cells, on different rows/columns. This is a problem which has been solved. However, I have a more particular case of the problem. I need to draw a circle that needs to ...
7
votes
4answers
644 views

Drawing a circle with an angle using TikZ

I'm trying to re-create this picture using TikZ: I, however, have a very limited understanding of TikZ, and, despite trying to learn how to draw this for an hour or so, have gotten nowhere on my ...
3
votes
2answers
163 views

A circular version of \underbrace or \widehat

I'm new to LaTeX and am searching for a function that acts like \underbrace or \widehat but is circular (I don't want the pointed middle part). Does such a function exist? I tried using Detexify but I ...
2
votes
0answers
271 views

Square root long division method

I wanted to draw the working column for this method of finding square roots: http://youtu.be/UnshaiwljGY Here is an image example of the process: But I am unable to draw it because I am new to ...
5
votes
1answer
251 views

How can I add open and closed circles on either side of a jump discontinuity?

How to indicate "including" and "excluding" dots on the graph? \documentclass[paper=a4, fontsize=11pt]{scrartcl} \usepackage{pgfplots, pgfplotstable} \usepackage{tikz} \begin{document} ...
3
votes
1answer
191 views

Multipart graph with linear and circular node patterns

I'm trying to draw a graph (PDF output of code below attached) that's a linear process, with a potentially circular element in it. As you may see in the upper picture, the the B,C,D elements aren't ...
3
votes
0answers
48 views

Tikz, Tangent Line to a Circle [duplicate]

Why is the tangent not really horizontal? \documentclass{article} \usepackage{tikz} \usepackage{circuitikz} \usepackage{pst-solides3d} \usetikzlibrary{shapes,decorations} ...
9
votes
1answer
683 views

Circled equal with same size as \oplus/\otimes with pdflatex

My question I am trying to make an equal circled of the same size as \oplus or \otimes, etc. I tried to use the solution provided here : How do I put a circle around an operator? However, the ...
4
votes
1answer
2k views

How can I annotate a figure with lines and circled numbers

I want to replace static image annotations with annotations in LaTeX to have them be all the same size. I always use figures and sometimes subfigures. How would I get the same lines as in the image ...
6
votes
1answer
292 views

The intersection of a sphere with planes through an axis tangent to the north pole

I am trying to draw a picture of a very simple sphere - i.e. one big black circle with additionally, an equator indicated with solid line in front, dotted in back. on this sphere I want to draw a ...
4
votes
1answer
364 views

How to fill random spaces with random circles in tikz?

Does anybody know how to efficiently draw either one of the following pictures in tikz? Specifically the "Well Graded" interests me, as one would have to fill random spaces between circles - with ...
2
votes
1answer
152 views

Calculate label angle from a value list

As a beginner of tex and tikz i stuck on array handling together with foreach. I would like to draw two circle with text along its circumference. \documentclass[tikz]{standalone} ...
6
votes
2answers
877 views

How to draw checkmark inside a colored circle in latex?

Referring to this question, how can I draw a checkmark inside a solid circle as shown as a picture? Regards
1
vote
2answers
224 views

sketching semicirles and horizontal lines

I want to sketch this parallel lines and semicircles between them sth like the attached figure... would you plz help me?
1
vote
3answers
123 views

Dashed circular arcs not created in texmaker

I am trying to run the following sample codes, containing PStricks codes generated by Geogebra, in Texmaker in the sequence Latex+dvips+ps2pdfviewpdf (in Ubuntu). \documentclass[10pt,a4paper]{beamer} ...
1
vote
1answer
190 views

Circle with legs - node anchors not enough [duplicate]

I need to draw a circle with n legs and one with n+2 legs. Usually I would connect to legs to the circle with the anchors. But north, north east, north west, etc... simple aren't enough. It looks ...