{cleveref} is a package that enhances LaTeX's {cross-referencing} features, allowing the format of references to be determined automatically according to the type of reference.

learn more… | top users | synonyms

3
votes
2answers
369 views

Change the output format of \cref from table to Table and from eq. to Equation

if you use \cref then you get references as eq. (1) / table (1) / fig. (1) but I want it to produce Equation 1 / Table 1 / Figure 1 how to I set this? I also want to know if it is possible to use ...
3
votes
1answer
67 views

Making broken \cleveref references extra-visible

In Making broken references extra-visible, I asked how to make LaTex's normal ?? and [?] markers for broken references instead render as some super-annoying, colored text, so that in skimming a long ...
3
votes
1answer
89 views

Change item font style when referencing

I constructed my own list longmainenum which has bold item labels. Now when referencing them with cleveref's \crefI want to have the bold font removed. A minimal example: \documentclass{scrartcl} ...
3
votes
1answer
115 views

Switch off “on page” for varioref

For referencing I'm using the three packages \usepackage{varioref} \usepackage{hyperref} \usepackage{cleveref} In the text I cite with \vref, which is redefined by cleveref and does its job very ...
3
votes
2answers
83 views

cref table caption: works in body, not in lot

I am using cleveref package. In one of my table, i'm refering to an equation in the text. The reference works fine (also hyperref) in the caption just below the table. Unfortunately it doesn't work in ...
3
votes
2answers
143 views

Cleveref to Nomenclature?

I am writing a book and use nomencl to print a list of symbols at the end. How do I cleveref to this list? In the introduction of the book, I would like to write something like "All the notation we ...
3
votes
1answer
290 views

Editing cleveref's format for multiple label references

I am using the cleveref package to refer to theorems, equations, etc, in an article (LaTeX). I wish to have the format of reference as: Thm. (1) for single theorem (or equation, figure, etc) and Thms. ...
3
votes
1answer
92 views

cleveref: \lcnamecref fails to work with theorem names that are not pre-defined

I'm using cleveref with the capitalise option, and I'd like to use the \lcnamecref command to give the name of one of my theorems in the text. But if this is not one of the theorem types pre-defined ...
3
votes
1answer
927 views

How to make sub figure referencing work in memoir + cleveref?

In the following example: \documentclass{memoir} \usepackage{cleveref} \newsubfloat{figure} \begin{document} \chapter{Example} \begin{figure} \centering \subtop[apple]{fig ...
3
votes
2answers
73 views

Refer to the “name” of an equation, while a List of Equations is generated using these names

I link two questions below because I use their solution, to number my equations and generate a list of my equations. My question about numbering equations: Number of Equation: 1, 1a, 1b Generate a ...
3
votes
1answer
59 views

Varioref's “Preceding Page” broken when cleveref is loaded

I'm using varioref together with hyperref and cleveref. Everything works fine except that as soon as I load cleveref, varioref forgets about "on the preceding page" and simply uses "on page N". ...
3
votes
1answer
158 views

Subcaption format with cleveref

I need to get Figure 1.1 (a) when i put \Cref{fig:NiceImage1}. I have to use \Cref{fig:NiceImage}\subref{fig:NiceImage1} for getting same result. \documentclass{scrbook} \usepackage[demo]{graphicx} ...
3
votes
1answer
101 views

How to cross-reference a list of sub figures at once? [duplicate]

How can I define a command similar to \ref for referencing a list of subfigures at once? Just like what cite package does for citations. A command like \myref{a,c,d} which can be tuned to generate ...
3
votes
1answer
153 views

Name formatting with cleveref - question about types

I want to customize the text that appears when I do a \cref{}, so for example, I want to make a link to section 0.1 but I want the text to say 'Summary' not section 0.1. I had this part working with ...
3
votes
2answers
786 views

Extra “appendix” when referencing using cleveref in elsarticle

How do I get rid of the extra "appendix" appearing when I cross-reference an appendix section? Example output is "...see appendix Appendix A". MWE as follows: \documentclass[preprint,3p]{elsarticle} ...
3
votes
2answers
262 views

cleveref counter and ref label number format with padding zeroes

I am using cleverref and a custom counter to typeset a special kind of reference, where I need the same text on the definition side and the reference side. Currently I use ...
3
votes
1answer
30 views

Is it possible to remove parenthesis from single cref references?

I am using cleveref to crossreference everything. Sometimes I write the reference inline like eq.(1). That is fine. But when it is enclosed in parenthesis it turns out like (eq.(2)). Which is not so ...
3
votes
1answer
71 views

Special \cref display for \externaldocument

I am using cleveref pointing to equations within my document, as well as to a technical appendix in a separate file (loaded by \externaldocument) Setup Lets that the the first file was in main.tex, ...
3
votes
1answer
98 views

Using \cref and custom labels for inference rule names

I have an array environment that is used to present inference rules (via a custom command). Now, these inference rules have names and i would like to refer to them using \label and \cref commands. I ...
3
votes
2answers
195 views

Editing the reference style for subfigures using cleveref and memoir

I'm using the cleveref package to reference floats (in this case subfigures) in the memoir class. Currently the output looks like this (sorry for the danish, I don't think it matters): Using the ...
3
votes
1answer
125 views

How to place text flushed right in math mode (next to equation number)?

I have equations like this: \documentclass[DVI=17]{scrartcl} \usepackage{amsmath} \usepackage{cleveref} \DeclareMathOperator{\FA}{FA} \DeclareMathOperator{\RA}{RA} \DeclareMathOperator{\MD}{MD} ...
3
votes
1answer
965 views

cleveref, hyperref and algorithm2e package produce wrong hyperlink (though correct page reference)

I'm using the packages as stated above in their latest version (also oberdiek-package is up-to-date). The following code produces the wrong pdf-link to a float environment (refers to the same page as ...
3
votes
2answers
47 views

Changing cleveref type for a single chapter

I have an appendix in my thesis that, due to fancyheader constraints, I define as \chapter* and not \appendix. However, now when I refer to it using \cref I get "chapter", I can change this manually, ...
3
votes
1answer
59 views

Cleveref does not sort self defined tags

Because I have many equations in my document and most of them do not need to be referred to, I always use \begin{align*}...\end{align*}. For the times I do need an equation number I have written a ...
3
votes
1answer
91 views

Are htlatex (TeX4HT) and cleveref compatible?

Simple question: When I use cleveref and \Cref{} or \cref{} I am able to compile the code and produce a PDF. When I use htlatex I get ?? in place of what I expect would be the object name and ...
3
votes
1answer
74 views

Can cleveref treat sections in other chapters as chapters?

I am using cleveref for my thesis. When referencing another chapter, if I put the label at the top of the chapter, it will say "chapter X", but if I put the label after defining a new section or ...
3
votes
1answer
278 views

chemmacros reaction environment and cleveref reference

I have a problem with the automatic reference by cleveref and the chemmacros package. When i refer to a reaction with cleveref, then cleveref types "eq. (1)" because chemmacros use the equation ...
3
votes
1answer
907 views

Defining cross-reference names for custom theorem environments in cleveref

I am concerned with the difference between this working example \documentclass{article} \usepackage{amsthm} \usepackage[capitalise]{cleveref} \newtheorem{thm}{Theorem} \begin{document} ...
3
votes
1answer
67 views

Using Cleveref with LIPICs documentclass fails for theorem environments sharing the same counter

I want theorems and lemmas to be referred to in the text as "Theorem 1" and "Corollary 2", sharing the same counter. This works fine when I'm using the normal article documentclass, but fails when ...
3
votes
1answer
1k views

How to correctly label an included PDF?

I have this: \label{appendix:b} \includepdf[scale=0.8,pages=1,pagecommand=\chapter{interview}]{interview/interview} \includepdf[scale=0.8,pages=2-,pagecommand={}]{interview/interview} ...
3
votes
1answer
71 views

Change the \crefrange title once

I'm using cleveref and want to use \crefrange in a German sentence but it doesn't create the correct title for this case: In den Abschnitte 7.3.1 bis 7.3.3 wurde für den […] In den ...
3
votes
1answer
132 views

Using a half-space with abbreviations in cleveref?

I'm using cleveref with abbreviated forms such as Fig. 1, and would like to have them typeset using a thin space/half-space rather than the ordinary non-breaking space. However, I'd only want this ...
3
votes
0answers
193 views

Prefix for \externaldocument references in \cleveref

The question Special case for last element with \foreach manually changed the references, and added the ability to have a prefix on references. Can I do the same thing using \cleveref? (Note: This ...
3
votes
1answer
209 views

Varioref, cleveref and autonum together

I'm trying to mix varioref, cleveref and autonum to have the following behaviors: Automatic adding of reference type (i.e. adding "section" when referencing a section). -> cleveref; Adding the "on ...
3
votes
0answers
110 views

Reference source code line in minted environment with cleveref

I'd like to reference lines in the minted environment (solved here for regular \ref) using cleveref. MWE: % !TEX TS-program = arara % arara: pdflatex: { shell: yes } % arara: pdflatex: { shell: yes ...
3
votes
0answers
519 views

Incompatibility of caption and cleveref package [closed]

The following code produced a TeX capacity exceeded error \documentclass{scrbook} \usepackage{caption} \usepackage{cleveref} \begin{document} \begin{figure} Text \label{fig:figures:1} ...
2
votes
1answer
131 views

Why cleveref references don´t works in this example?

I was compiling with PDFLATEX and appears ?? instead references. \documentclass[12pt,a4paper]{article} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage[spanish]{babel} ...
2
votes
1answer
333 views

Reference Lemma from the same document

I am writing a document, where I have 3-4 Theorems, and a Lemma. I want to refer to the Lemma in the Theorems (possibly highlighted and a link to the Lemma). How should I go about doing it? I tried ...
2
votes
1answer
72 views

cleveref for theorems with same type

I usually create theorem environments in pairs - one uses the ordinary theorem style, the other (whose name starts with a capital letter) uses the "break" style, which inserts a line break before the ...
2
votes
1answer
165 views

Cleveref displays ?? 3.2.2 instead of the correct reference name

I'm trying to use cleverref for my references but up to now it does not work for me. Currently my setup looks like this: \documentclass[a4paper]{article} % PACKAGES ...
2
votes
1answer
2k views

\ref not working with achemso

I'm trying to write a document with the achemso package, but my \ref are not working right. achemso links to a package called cleveref, then renames cleveref's \cref into \ref, so any answers for ...
2
votes
2answers
65 views

Numbering tables sequentially [duplicate]

I would like to number my table so that I have, e.g. Theorem 1.3 Table 1.4 Lemma 1.5 How can I achieve this result? I am also using cleveref, so ideally \cref{ThatTable} would produce a linked ...
2
votes
1answer
104 views

Generate HTML from document that uses autoref/cleveref

I have an existing document that was written using hyperref and natbib, and am trying to generate a website alongside the PDF that is already built. The document was written using autoref references ...
2
votes
1answer
240 views

Is it possible to use abbreviations with cleveref?

I would like to use the full name in most circumstances for references. But sometimes, e.g. in $\xRightarrow{\cref{prop:15.2d}}$ the full name might be too long. In this example, it gives ...
2
votes
1answer
271 views

Creating hyperlinks with imakeidx using cleveref

I'm using imakeidx to create the index of my thesis and I would like to have hyperlinks to the pages that are hereby cited. Unlike this discussion, I'm using the cleveref package. Here is the MWE ...
2
votes
1answer
857 views

Referencing externalized pgfplots with subfig and cleverref

I use pgfplots to produce a vast amount of images in my document. Due to limited LaTeX memory, I am forced to use \tikzexternalize. Moreover, I also use the subfig package to group several pictures ...
2
votes
1answer
31 views

Always getting upright numbers in references created with \cref, with italic-correction for conjunction between references

How do I make it so that I get upright numbers all the time in references created with \cref? I believe I'm supposed to do this with \crefdefaultlabelformat{#2\textup{#1}#3}. But in my example below, ...
2
votes
1answer
34 views

Remove space in the default `\cref` command

I have my crefs defined as \crefname{section}{§}{§} \crefname{subsection}{§§}{§§} And when I reference it displays, for example, like § 4.5. I would like the middle space to dissapear and this ...
2
votes
1answer
335 views

new command for including a custom string into \cref

In this thread here: Subfigure labelling for a single figure I suggested a solution how to include a custom string into the hyperlink created by the \cref command. I'd like to create a compact new ...
2
votes
1answer
306 views

cleveref and marginfigure in memoir

I'm running into a problem when using cleveref to refer to marginfigures in memoir. The following code illustrates the problem (apologies for the somewhat long preamble, but I need the space in the ...