4
votes
1answer
86 views

How do I set only one side of a tikz node's border color?

I want to have a node with different border colors: One for the upper and left border, one for the lower and right color. The result should look like this: Is this possible? From all examples I ...
1
vote
0answers
30 views

how can I load a tableplot, put random colors, and the legends automaticaly using a foreach?

\begin{tikzpicture} \begin{axis}[scaled x ticks={real:1e3},xtick scale label code/.code={$\cdot 10^3$}, axis lines=left, %xticklabel={$\pgfmathprintnumber{\tick}\lambda$}, pone lambda al lado del tikz ...
7
votes
1answer
133 views

How to plot scatter points using pgfplots with color defined from table rgb values?

I am trying to plot a set of data points (scatter points not linked to each other), where each point has a different color. The color definition is given by predefined rgb values written in the same ...
7
votes
1answer
97 views

How to specify a direct color in a tikz picture

I want to model gradients in TikZ for a paper covering color gradients. These are rather special, so a cannot rely on a TikZ shade alone. Thus, I want to model the gradient using consecutive TikZ ...
4
votes
1answer
107 views

Add gradient to colorbox

Newby here. I found a great template for technical reports here . . http://www.latextemplates.com/template/stylish-article I would like to change the background color of the abstract and section ...
3
votes
2answers
122 views

How to highlight a path in Tikz with two different colours?

I have a small graph drawn in Tikz with two paths through it highlighted in different colours. However, these paths are going to share an arrow. What I would like is to highlight this arrow with both ...
20
votes
4answers
944 views

How to shade text in different colors?

I need a single character in two colors. Figuring I could use the shadings library of TikZ, I followed the manual (section 23.4.1, the TikZ example): \documentclass{article} \usepackage{tikz} ...
2
votes
1answer
109 views

How to fill logic gates in circuitikz?

How can you specify a fill color for logic gates in circuitikz? It does not work as I would have expected: \documentclass{standalone} \usepackage{circuitikz} \begin{document} \begin{circuitikz} ...
14
votes
2answers
384 views

“Drill holes” using glyphs or TikZ's even odd rule for text

I know how to use TikZ even and odd rule, but what I need is to apply it on a node text. Compare I need the text to be punched out such that when I use the resulting pdf on top of a background, the ...
3
votes
2answers
111 views

Drawing a Venn-Style-Diagramm underlying a Graph with TikZ

I want to draw a graph (the data structure) such that certain subgraphs form a sunflower (a notion from combinatorics). In other words I want to indicate that the sets overlap in the middle ...
2
votes
0answers
60 views

TikZ: Printing press cannot print document due to RGB colors, layers and transparency

The place I print my thesis needs the PDF file to conform to certain demands. Demands I was not aware of prior to sending them the document. So, here is the challenge: Using PGF/TikZ how can I bulk ...
5
votes
2answers
181 views

Coloured box with tikz

I'd like to break a coloured box when the page which contains it breaks... here is an example which shows this issue: \documentclass[11pt]{report} \usepackage[explicit]{titlesec} ...
6
votes
1answer
325 views

Create style for a new section

anyone can help me to do something like this? for an informative section in my document
14
votes
2answers
640 views

Color gradient fill between three corners of a triangle

Updates Update1: Tried to implement solution by Harish Kumar (below) Update2: Added a real example of what I would like to get in the end. I have a feeling I tried to leave to many things out. ...
3
votes
2answers
175 views

Someone can help me draw this

I want to draw the symbol of my engineering and be able to change the color, anyone can help me with this?
5
votes
2answers
109 views

Recreate default colors

How is it possible to specific the colors shown in the sample plot here: The code is below and copied from the site! \begin{tikzpicture} \begin{ternaryaxis}[ ternary limits relative, ...
4
votes
0answers
128 views

TikZ Chromaticity Diagram

I'm trying to make a chromaticity diagram in tikZ, does anyone know how to make one? I want this My issue is not in forming the spectral locus that I can do, right now I'm only using three points ...
6
votes
1answer
149 views

Listing with two columns in a single fancy frame

I am playing a little with lstlistings and I wonder whether such a thing would be achievable for all my listings: How to achieve this kind of things? Note : I am searching for a solution I can ...
4
votes
1answer
56 views

Axis part coloring

I try/want to color the x-axes in a special way. I want to get the bottom x-axis red, but not the whole line. Only the 3 parts under the graph have to be colored. I tried it with options separate ...
6
votes
1answer
135 views

Newsletter Formatting

First post here but I'm trying to create a newsletter. However, I'm having some difficulties. I want it to look similar to this example: http://www.calvin.edu/admin/hr/newsletter/MAY%202012%20(e).pdf ...
3
votes
3answers
236 views

Filling rectangle in TikZ with more than one color

To draw a rectangle and fill it in gray in TikZ: \draw [fill=gray,very thick] (0,0) rectangle (2,1); Now, I want to fill it in both gray and yellow. The best way would be if I can make diagonal ...
3
votes
1answer
217 views

TikZ: transparency causes problems with the color black (opacity, transparency, color model, Adobe Reader)

I want to have a fill color with transparency but I also want the text to be perfectly opaque. But somehow it does not work. \documentclass{article} \usepackage{tikz} \usetikzlibrary{shapes,} ...
8
votes
1answer
204 views

Why do colours defined using CMYK give inconsistent results in TikZ mindmaps?

Background I was trying to draw a mindmap using the tikz mindmap library for possible use in a beamer presentation. The Problem Depending on my choice of colours, the colour of nodes does not ...
10
votes
2answers
291 views

make enumerated button in TikZ

Is it possible to make an enumerated button, similar to the ones shown in the figure below? I will be using them as pictures in an external document (not TeX).
7
votes
1answer
226 views

Color and legend for 3d surface

I'm trying to plot a 3d surface using pgfplots and this is what I have done so far: \usepgfplotslibrary{patchplots} \begin{tikzpicture} \begin{axis}[% width=12cm,height=12cm, xlabel={$J_1$}, ...
10
votes
3answers
438 views

Filling in the area under a normal distribution curve [duplicate]

I'm trying to fill the area between the two $z$-scores but I'm not having any luck. Could someone please help me with this? \begin{tikzpicture} \begin{axis}[ no markers, domain=0:6, ...
4
votes
1answer
189 views

How to differentiate many lines in a chart? [duplicate]

I create a chart with many (actually 10) lines in different colors (see example). I want to make it as easy as possible to differentiate the different lines. Some possibilities I have in mind: ...
6
votes
0answers
179 views

Different color [closed]

I use the following code to generate a plot \documentclass{article} \usepackage{xcolor} % colorize your documents \usepackage{graphicx} % and use graphics \usepackage{tikz,pgfplots} % ...
16
votes
1answer
339 views

Color Blind Friendly Mesh Colormap

I have a plot with a mesh and it uses a lovely colormap, however, I can't find a way to make tikzpicture only use colorblind friendly colors. I'm not colorblind, but I know at least some of the people ...
5
votes
2answers
329 views

pgf/tikz: Making the filling / gap between double border lines transparent

I have a rectangular box with double border lines. The pgf manual (chapter 15.3.5 Graphic Parameters: Double Lines and Bordered Lines) says that the default filling is white. I want the gap to be ...
7
votes
1answer
211 views

How to map value to color using TikZ?

I am trying to draw rectangles, each of which has a corresponding value, which will be mapped into a color from a color map based on the value. This is how I want the write the code. What is missing ...
8
votes
3answers
237 views

Two backgrounds in a graph

How can I set two different backgrounds in a graph using pgfplots? In my case, I need a colored background for x<5 and a different background for x>5.
8
votes
2answers
193 views

How to define an environment with a colored tikz node included

I would like to define a new environment like \begin{mybox} some text \end{mybox} that would automatically expand to something like \begin{tikzpicture} \node[fill=red!0.5] {some text}; ...
12
votes
4answers
499 views

Colored box around sentences

I want to have a colored box around the text/sentences and its width will be fixed to be 80% of the page width. I tried \fcolorbox but it can't break lines. It is possible to do it with TikZ or is ...
8
votes
3answers
304 views

How to use a large number of arbitrary rgb colors in a TikZ image?

I have a document with some TikZ images in it, which are automatically generated from a program I have written. All images are fairly similar, and each of them contains of a large number of squares ...
5
votes
1answer
208 views

How to change the color scheme to make this figure more elegant?

Here different colors means different weight of the edge, and the color of the points is arbitrary. The tex code: \documentclass[aps,prl,superscriptaddress]{revtex4} \usepackage{subfigure} ...
0
votes
1answer
1k views

Incompatible color definition when using tikz with color package

I am using the tikz package to draw some diagrams. In addition, I need the color package for some highlighting. As the wikibooks page of the color package states, it has to be used before the tikz ...
10
votes
1answer
484 views

Transparent shade using TikZ

I wonder whether it is possible to create a transparent shading effect (like the one below) without an exact specification of the fill color. This solution is good until I have to change the ...
6
votes
2answers
374 views

Path with complicated colormap in TikZ

I want to draw a path in tikz whose local color is a function of position. Here are two examples of what I have in mind: I found the answers from Path following color gradient in TikZ very ...
12
votes
1answer
370 views

Tikz patterns and cmyk color model

Consider the following example. \documentclass{standalone} \usepackage[cmyk]{xcolor} \usepackage{tikz} \usetikzlibrary{patterns} \begin{document} \begin{tikzpicture} \tracingall \draw [pattern = ...
1
vote
0answers
103 views

Color/Opacity of a circle segment [closed]

I'd like to know how to color a segment of a circle, more specifically using the provided example in this link. For example I want to color the circle in 45 degree segments or similar. I'd also like ...
9
votes
3answers
357 views

How can I shade from red to green along a curve?

Let's take the following picture as an example. I want to shade the fan-shaped area from red to green along the curve shown with the arrow in TikZ. How can I do this? Code: ...
4
votes
2answers
68 views

Why is \color moving the relative position of an entire \picture environment?

I've been writing a set of simple line drawing macros for some piecewise functions. For some reason, when I attempt to add color to the lines, each segment is translated to the right. I've verified ...
3
votes
2answers
281 views

How to define the distance of color regions in radial shading using TikZ?

I am making a series of figures explaining the photolithographic process, and need to find a way to illustrate edge beads during spin coating. To show this I initially wanted to use radial shading, ...
15
votes
2answers
323 views

Is it possible to detect the “current color”? (for example in a pgfplot drawing?)

Is there a code to deduce the current color of a PGF plot to which a node is associated? Better yet, is it possible to get the RGB decomposition as well? ... addplot coordinates{ (0,0) (1,1) } node{ ...
6
votes
1answer
363 views

How do I create a Tikz mindmap that has two connected roots?

I am creating a mindmap that has multiple root concepts instead of just one. How can I create such a mindmap using Tikz? These are the mindmaps: \begin{tikzpicture}[small mindmap,concept ...
25
votes
2answers
836 views

Using Pantone/spot colors and TikZ together

This question led to a new package: xspotcolor I came to the end of writing book in LaTeX. Thanks to this great community I have succeeded to apply designer's wishes into document and I ...
9
votes
1answer
437 views

How to adapt the color of a label using pgfplots

I created this style that shifts the labels and put them on the bottom of the ybars. However, I have a problem with the bars that have too short length (for example, see the 8.7 and 5.1 in the ...
6
votes
1answer
388 views

PSTricks and Tikz in plain TeX

I would create both pstricks and tikz picture in my plain TeX documents. If I try, I get an error, maybe caused by the use of the xcolor package. The error is the following: \\color@black ...
3
votes
0answers
126 views

Node colors change after building (texmaker pdf and real pdf looks different)? [closed]

I have tried (my own way) to make the example in the TikZ & PGF Manual for Version 2.10 (p. 68). When I build this code, the pdf-file does not look identical to the PDF viewer in texmaker. What ...