Use the {context-mkiv} tag if ConTeXt Mark IV answers would be helpful.

learn more… | top users | synonyms

2
votes
0answers
29 views

Why is there a left-shift in ConTeXt's \setuparranging

In this page arranging example, why don't the green lines align with the black lines?
2
votes
1answer
45 views

Distance between the header and the title in ConTeXt's enumerations

I have defined in ConTeXt an enumeration for definitions: \defineenumeration[definition][theorem][ text={Definition}, prefix=chapter, way=bychapter, right=., titleleft=(, ...
2
votes
0answers
361 views

Missing page numbers, first chapter only - ConTeXt

I am typesetting books in ConTeXt, and for some reason the first chapter is missing page numbers! There are correct page numbers in the frontmatter, and correct page numbers in the second chapter and ...
2
votes
1answer
89 views

ConTeXt: Cross-references for Table of Contents hyperlinks

Background Looking to customize the table of contents. Problem In the example, the following problems exist: The last entry in the table of contents is not hyperlinked. All hyperlinks are off by ...
2
votes
0answers
125 views

add text in the middle of the cover page

I found this code in the "cld-mkiv.pdf" manual writing by Hans Hagen. I would like to put some text in the middle of the cover page but i don't know how. I think that i need to define a overlay. ...
2
votes
0answers
180 views

Special layout with multi-page table in ConTeXt

I have a special layout of page to make. It contains blocks of text, a graph and tables. I don't know in advance the length of the tables in the document. I have a dummy two tables example to show ...
2
votes
0answers
110 views

Is there a documentation for \setupTABLE?

I need to know which parameters can be passed to \setupTABLE command. Is there any documentation or can it be extracted from source ?
2
votes
0answers
247 views

Adding vedic accents in sanskrit in devanagari script in red color using Context - not working in all cases

Using the techniques described in Coloring combining characters without changing color of a base character I have been able to color red the vedic accents in sanskrit typesetting using ConTexT MIV. ...
2
votes
0answers
420 views

Body text is overwriting a floating image [closed]

I'm learning to use ConTeXt by formatting a document. I've run into a problem with wrapped graphics. The body text overlaps the image when I use the {\bf text} function on this line (inside the red ...
2
votes
0answers
163 views

How to snap the page dimensions to the grid in ConTeXt? [closed]

In ConTeXt, I am using the setting grid=yes to make all of the text in a document use grid typesetting. ConTeXt seems to automatically adjust the height of this grid based on the size of the font ...
1
vote
2answers
216 views

Why is there an extra space when I create a reference location in a document in ConTeXt?

I am trying to create a simple cross-reference from one page to another, e.g., in part of the document, it says, "see bears, p. 3." From the ConTeXt manual, p. 170, I was able to determine that a ...
1
vote
1answer
101 views

why the year “2007” can not be displayed in my generated pdf after compiling “http://wiki.contextgarden.net/Curriculum_Vitae”?

I want to use the resume template m-resume.tex and cv-resume.tex, and downloaded it, combined the two files into one file called resume.tex, and then used conTeXt mkiv's command context to compile it ...
1
vote
1answer
297 views

Stack margin text in outer margin in ConTeXt Mk IV

I try to stack marginals with ConTeXt Mk-IV. In this question a possible solution was given. The solution works fine, but it turns out that the location=outer parameter does not work any more. Please ...
1
vote
2answers
89 views

How to implement a specific head or top like this in conTeXt?

all I want to use conTeXt for writing my resume, I found the head like the red area very awesome, but I don't know how to implement it, or what elements I should use to do it? After reading ...
1
vote
1answer
79 views

How to write Japanese with ConTeXt?

Would you mind explaining to me why the following ConTeXt code does not work and how I can fix it? \mainlanguage[ja] \definefontfamily[mainface][serif][Heisei Mincho ...
1
vote
1answer
241 views

ConTeXt: How to control vertical and horizontal line thickness in tables?

In LaTeX, I could do something like: \begin{longtabu} to \linewidth {X |[3pt] X} ... \tabucline[3pt]{-} ... \end{longtabu} which would produce vertical and horizontal lines of 3pt thickness. ...
1
vote
1answer
85 views

How to teach ConTeXt to recognize and format custom syntax?

I have a document filled with editor's comments, appearing like this: \starttext This [is ]some text with comment[s] added to show corrections to erro[r]s. \stoptext I need to make ...
1
vote
1answer
410 views

How to make gray-colored text in ConTeXt beta?

As I know, in ConTeXt stable, one can use \color[gray:3]{} to display the text inside the brackets with a very light gray color, e.g.: \setupcolor[rgb] \starttext \color[gray:3]{This is some ...
1
vote
1answer
269 views

How to allow line breaks before the numbers in paragraph enumerations in ConTeXt?

I have some enumerated items, in paragraph form, like this: \setuppapersize[A5] \showgrid \setupitemize[text, r] \starttext \startcolumns[n=2] \startitemize \item This is a ...
1
vote
1answer
172 views

mtxrun opens PDF reader multiple times (in some invalid way)

This seems like a problem that should be well known and easy to fix, but I can't find any information about it. I decided to look in to ConTeXt, and I've hit a couple of stumbling blocks (but one is ...
1
vote
1answer
67 views

Integrating lua-generated Metapost graphics in Context

Normally we can integrate Metapost graphics in Context with the use of \startuseMPgraphic{id} and \useMPgraphic{id}. The idea is to define the graphics somewhere and use them somewhere else. However, ...
1
vote
1answer
93 views

TikZ is colored despite having \setupcolors[state=stop]

In the following MWE I get a red square, but I want it to be gray, as in the also provided LaTeX-document: % ConTeXt MWE \setupcolors[state=stop] \usemodule[tikz] \starttext ...
1
vote
1answer
94 views

Error running Context texexec on Mac OSX 10.10, Ruby 2.2.0 Stable

When I try to run texexec on my context file I get the following error: texexec va.ctx /Users/davidsmith/context/tex/texmf-context/scripts/context/ruby/base/ctx.rb:120:in `manipulate': invalid byte ...
1
vote
1answer
201 views

ConTeXt: Change location of page numbers in table of contents

Background Looking to place the page number on the left of each section heading in the frontmatter's table of contents, similar to the following (where "Title Here" is a section title and the page ...
1
vote
1answer
155 views

ConTeXt: Embed forward referenced figure

Background Looking to recreate the following fancy table of contents where a limited number of images in the ToC are selected at random from all the figures included in the document, without ...
1
vote
1answer
241 views

How to define numbered theorem, definition at ConTeXt ?(ConTeXt)

I have problem about define numbered like theorem, definition, corrollary etc at ConTeXt ? You can see like this my screenshot and my code (sorry, i copy and paste from other document) : and my ...
1
vote
1answer
283 views

LaTeX - ConTeXt converter or there and back again:)

I'm looking for some converter LaTeX -> ConTeXt and perhaps LaTeX <- ConTeXt (just in case). I can write simple script and implement translation of basic syntax, but perhaps someone did it?
1
vote
1answer
347 views

ConTeXt Standalone installation problem under Debian GNU/Linux

I am trying to install ConTexT Standalone under LMDE, a Debian GNU/Linux operating system. I followed the system-wide installation instructions step-by-step without any problem. Except for the final ...
1
vote
1answer
153 views

How to set the line width of vector graphics in ConTeXt?

I have several vector graphics in PDF format that I want to place in my ConTeXt document. I added them with \externalfigure[graphic.pdf], some scaled to different sizes. All of the lines in these ...
1
vote
0answers
40 views

Is it necessary to use nonstopmode in ConTeXt? [closed]

Is it necessary to use --nonstopmode in ConTeXt or using --once is enough ?
1
vote
0answers
18 views

How to use \page[quadruple] while having a cover as last page in ConTeXt?

I am creating a personalised magazine in ConTeXt-LuaTeX. It has a cover (that what you can see before opening the magazine), existing of two .pdf files. It contains several chapters adaptive text, ...
1
vote
0answers
15 views

placefigure left to paragraph inside columnset in ConTeXt

I would like to have a dropcap which is an image and use it's actual size (rather small) instead of specifying a number of lines (as lettrine does). I came up with a somewhat working solution using ...
1
vote
0answers
42 views

conTeXt: What should I do for compile a tex file when I have two different types of modules?

For resolving my previous question , according to [AboAmmar's answer] (http://tex.stackexchange.com/a/253658/81323), I must create a separate file m-resume.tex and use command texexec cv.tex to ...
1
vote
0answers
81 views

Pass parameters to ConTeXt \component, \product, etc

I would like to use, and it appears suited, the \component and related commands in ConTeXt. However, I would like to have multiple parameters to a given component e.g. \startcomponent X ...
1
vote
0answers
127 views

ConTeXt: Prevent page break between heading and image

Using ConteXt, how could one prevent a page break between a heading and an image or text + image? For example, given: \section{With a Chart} \placefigure[here] {}{\externalfigure[Chart.pdf]} % or ...
1
vote
0answers
164 views

How to convert a ConTeXt document to PowerPoint presentation?

I created a very simple, ~100-page document in ConTeXt. It only uses \starttext, \chapter, \section, \startitemize, and \item, e.g.: \starttext \startitemize \chapter{First chapter} ...
1
vote
0answers
164 views

ConTeXt: Bibliographies in current ConTeXt not working any more? [closed]

The "very basic example" of Bibliography mkiv fails to work using current version 2014.03.07 11:42. I put the code inside a tex file test.tex and the provided bibliography database inside sample.bib. ...
1
vote
1answer
99 views

ConTeXt: Retain ToC Hyperlinks using alternative command

Background A custom Table of Contents entry was suggested to move page numbers from the right-hand side to the left-hand side. Problem The custom command loses ToC hyperlinks. I have tried to ...
1
vote
0answers
33 views

Scale figure to remaining page height in ConTeXt [duplicate]

I have a page with some content on it and some remaining space at the bottom of this page. |=========| | header | |---------| | | | page | | content | | | |---------| |remaining| ...
1
vote
0answers
93 views

How to prevent page breaks from appearing at the point where a sub-itemized list begin in ConTeXt?

I have a lengthy document containing lots of itemized lists, in two levels. It is like this, but often much longer: \startitemize[r] \item This is a statement. \startitemize[n] ...
0
votes
1answer
137 views

ConTeXt: How to make table of contents to show only those entries which go after its placement?

\setuplist [chapter][ style={bold}, color={default}, ] \setuplist [section] [color={default}] \setuplist [subsection] [color={default}] \setuplist [title][ style={bold}, color={default}, ] ...
0
votes
2answers
356 views

ConTeXt: How to place a short caption under a wrapped figure?

This is a follow-up question to a previous ConTeXt solution. That solution dealt with wrapped figures in a ConTeXt document generated from Pandoc Markdown. Now, I would like to extend that solution ...
0
votes
1answer
137 views

ConTeXt: Left-justify text to overlap hidden/disabled frame border

Background Looking to left- and right-align text in a footer. Problem The following image shows that the word "Betasec" is not left-aligned with the black horizontal line above it: I believe ...
0
votes
0answers
82 views

How do you set AUCTeX so that it displays the compilation buffer in a new frame?

I'm using AUCTeX with Aquamacs to work with ConTeXt. When I compile the document, it results in a split window with the compilation output displayed in the lower window. If I tell Aquamacs to show ...
0
votes
0answers
53 views

conTeXt Mkiv: the number of parameters can not be more than 9?

For testing, I have a definition: \define[9]\DEFINETEST{#1,#2,#3,#4,#5,#6,#7,#8,#9} context test can work fine, when I modify the above into: \define[10]\DEFINETEST{#1,#2,#3,#4,#5,#6,#7,#8,#9,#10} ...
0
votes
0answers
72 views

Error again, Simplesildes at Context after updated 2014.10.16?

I have a problem again with Simpleslides at ConText after updated modules. I have MWE like this : \usemodule[simpleslides] [style=BottomSquares] \setupTitle [ title={Title of the ...
0
votes
0answers
205 views

Is it possible to install ConTeXt on Windows without admin rights?

Well, the title says all. On contextgarden it is written: NOTE: You will need admin rights to your Windows to manage the installation process. If you don't have that, get somebody who does. Is ...