{cross-referencing} is about making connections from a point in a document to related information elsewhere, usually within the same document. Standard commands are \label and \ref. For questions about citing or bibliographies, use {bibliographies} instead.

learn more… | top users | synonyms (1)

8
votes
2answers
77 views

Is there a way to show Reaction instead of Equation when referring to an equation?

I'm writing a thesis in which I have both equations and chemical reactions. I was wondering if it can be changed something in equations referencing, so that when you refer to one of them that is a ...
4
votes
1answer
30 views

How can I create context-sensitive reference names for an environment which defines label prefixes on-the-fly?

Background: I asked a rather muddled but related question earlier. I received an excellent answer from Manuel to that question but my confusion about the problem means that I unfortunately asked the ...
5
votes
1answer
64 views

Would it be possible to create a navigation menu at the end of each section with automatically generated links?

I want to make a navigation menu at the bottom of each section|subsection|subsubsection|paragraph. This document will be embedded in the binary of an application. It is what the user will see when ...
3
votes
2answers
60 views

Creating new counter formats on-the-fly with enumitem's \AddEnumerateCounter*

Aesthetic caveat: I am actually using small-caps with hanging figures and not lining. However, in creating a minimal example, I have succumbed to the defaults and created a typographical monstrosity. ...
9
votes
2answers
85 views

\ref with macro as parameter

I would like to write a macro (using Latex3/expl3) that can automatically refer to say plot using several key-value parameters. Here is what I currently have: \keys_define:nn{label}{ Re .tl_set:N ...
3
votes
1answer
76 views

\subfloat \caption odd behavior

I'm very new to Latex and trying my best to adopt it as my method of choice for paper and my Thesis. I have always managed to solve any problems encountered by browsing through this forum but can't ...
1
vote
1answer
22 views

Marking something as undated in the bibliography

I would like undated books to show up in the bibliography as undated, e.g. as something like: Oslo kommune (undated). Nedre poenggrense for inntak til Vg1 (videregående trinn 1) for ...
6
votes
2answers
88 views

Make footnote clickable both ways

Using the hyperref package, footnotes become clickable and lead to the bottom of the page where the footnote is printed. However, clicking on the footnote's number does not bring the reader back to ...
2
votes
1answer
33 views

How to make a reference to the first occurence of a citation in biblatex

How can I get the number of the footnote where an entry was cited for the first time using \ifciteseen? MWE: \documentclass{article} \usepackage[ backend=biber, citetracker=true, ]{biblatex}...
2
votes
1answer
38 views

citation with page number does not work

i want to cite some books as references and add the page number to the reference, for example i have this bibliography entry : @book{ref2, title={Introduction to Information Systems: Supporting and ...
4
votes
1answer
59 views

Re-using label names for different items across chapters

I'm writing my thesis (using a university-specific document type) and am importing many chapters (using the package import). Each chapter is taken directly from a latex file that once served as an ...
1
vote
1answer
28 views

Mis-referencing of a label from an enumerate environment

MWE: \documentclass[12pt]{article} \usepackage{icomma} \usepackage[english]{babel} \newcommand{\bookcite}[6]{#1, #2: \textit{#3}. #4 ed. #5, #6 pp.} \usepackage{enumitem} \usepackage{hyperref} \...
0
votes
0answers
15 views

Natbib - Cite full author name [duplicate]

I'm using natbib for formatting my references. I want to include; World Health Organization (2015) or (World Health Organization, 2015) as \citet and \citep. However, as you may guess, it only ...
6
votes
1answer
134 views

Insert caption text to body

The \ref command can refer only the number of the table, like the following code. \documentclass{article} \begin{document} According to Table \ref{table} [[HERE]], we blah blah. \begin{table}[tb] \...
0
votes
0answers
55 views

How to cross reference across child documents in Classicthesis LyX version

I have perfect solution for cross referencing propositions etc within each Chapter, that is, each child document, see my previous question. but I am stuck again in cross referencing them aross Chapter ...
3
votes
1answer
61 views

Is it possible to insert figure, caption, graphic from other tex file

I have two .tex files. The first .tex file includes two figure: Fig.1 and Fig.2. Could I cross reference whole detail of each figure in other tex file, including graphic, caption, figure number...? ...
1
vote
2answers
41 views

Failure to use bibliography in other tex file

I have two .tex files: reftest.tex which contains the main details: reference, figure, equation; and cross_ref.tex. In cross_ref.tex, I want to cross-reference citation of refernece in the reftest.tex ...
1
vote
2answers
79 views

How to cross reference theorem lemma etc as for example “Theorem 1” in LyX

I have loaded the theorem by type and theorem by type within Chapter (TIP for learner:add the first in order to add the second). So I use theorem environment for different types: proposition, ...
2
votes
1answer
27 views

Changing the printing of a counter only in references

I have the following problem : I have a counter (in my case enumi) that I want to use for referencing with a different name than when it is appears first. Is there a tool in Tex/Latex to do this? ...
1
vote
1answer
98 views

Appendix and cross-referencing

first my code: (I added all packages I'm currently using) \documentclass[12pt,a4paper,notitlepage]{report} \usepackage[utf8]{inputenc} \usepackage{amsmath} \usepackage{amsfonts} \usepackage{amssymb} \...
1
vote
1answer
55 views

Problem Hyperref Coloring Only TOC

I would like to use the hypperref to create blue links for only toc sections and subsections. \documentclass[12pt,oneside]{book} \usepackage{amsmath,amssymb,amsthm,amstext,amscd,amsfonts,amsbsy,...
2
votes
1answer
36 views

Cross Reference of Environments

I defined a personalized table environment as follows: \newcounter{Table}[section] \newenvironment{Table}[1][]{ \refstepcounter{Table} \newcommand{\tbtitle}{#1} \begin{center} } { \vspace{0.3cm}\\\...
1
vote
0answers
30 views

Cross-referencing inside empheq environment

Today I encountered a problem getting a cross-reference of one of my equation inside the empheq package. I use the gather environment inside my empheq equation and would like to label both equation ...
0
votes
0answers
18 views

changing cross-references' names in LyX 2.1.0

Salut. I am writing an article in LyX 2.1.0 in a language other than English. How do I change the cross-references' names, eg. from "Figure 1" or "equation 1" to "xxx 1" and "yyy 1" ? I have been ...
1
vote
1answer
44 views

Problem with inserting “page” in Glossary

I read this question to insert "Page" before the occurencing page of a Glossary Entry. I tried the proposed solution, which rely on the following code : \renewcommand{\glsnumberformat}[1]{% (\...
0
votes
1answer
37 views

Change label numbering prefix

I want to change the labeling of my figures from A.1, A.2, ... to Abb. 1, Abb. 2, ..., because my appendix chapter is already labeled with A and this causes some confusion (whether A.1 is meaning the ...
2
votes
1answer
42 views

unexpected linebreak when using `\nameref` in marginpar

I have an unexpected linebreak in my \marginpar and don't know where it comes from. It appears right in the middle of the \nameref... Does anyone see the mistake? \documentclass[a4paper,twoside]{...
0
votes
1answer
44 views

What package should I load to use refsegment?

I am using this thesis template: https://github.com/kks32/phd-thesis-template/ I want to print a reference list for each chapter. When I insert the following command I get a lot of errors. The ...
4
votes
4answers
134 views

Excluding subsection from toc but allow proper referencing

I am involved in the later stages of a big project, in which we use the following \tocless command to exclude specific subsections from appearing in the table of contents: \newcommand{\nocontentsline}...
7
votes
3answers
217 views

Best practices in labeling (giving labels to equations, theorems, items, etc..)

Are there some Latex style guides with part dedicating to labeling? I want to use some persistent labeling scheme, but don't know any (except for uncertain one in my mind). What labeling scheme ...
2
votes
1answer
49 views

How to separate glossary entries from section references in hyperref

I have a document, a glossary and references. I am using the hyperref package to create hyperlinks \usepackage[colorlinks = true, linkcolor = red, urlcolor = green, citecolor ...
2
votes
0answers
38 views

How to modify the sorting of cleveref?

In the backmatter of my document I have the part with plates. Each page is one plate with several figures in it. The counter for the figures starts on each page/plate, but the number of the figure ...
0
votes
0answers
19 views

Cross-reference line numbers [duplicate]

I recently found a helpful post about cross-referencing line numbers in LaTeX. This seems great for responses to reviewers, but suffers from a particular limitation. Quoting the original article, ...
1
vote
1answer
55 views

PGFPlots external crossref updates

I’m using the PGFPlots package along with its external library for my dissertation. Overall, it's worked great and has been extremely helpful. But I've had issues when trying to update cross-...
3
votes
2answers
105 views

Postfix for cross references of enum lists

I have a question to manipulate cross references to enumeration lists. To change the appearance of the list, I know the commands \theenumi to choose the type (roman, arabic, alph...), \labelenumi for ...
1
vote
0answers
23 views

how is the easiest way to refer to references in the text as supernumbers rather than bracketed numbers. I am using documentclass article

How is the easiest way to refer to references as super numbers rather than as bracketed numbers (e.g., [3]). I am using documentclass article with no special bibliography indications.
0
votes
0answers
21 views

Back reference in the bibliography

Hellow I used this source to view the bibliographie \usepackage{harvard} ..... \bibliographystyle{dcu} \bibliography{These} I search how view the cited pages in the bibliographie references? I ...
0
votes
0answers
28 views

Italic correction after a reference

It seems that italic correction doesn't work after a \ref. I wanted to name a variant of a theorem with a prime, and this causes a problem if there's a reference in italic mode. Here's a simple ...
0
votes
1answer
22 views

Reference to table into appendix

I am a new user of latex and I want write in my text some reference to several table in appendix If from a chapter write \ref{tab:1d_1_sta} I have only A.1 and not A.1.1 How can solve this ...
2
votes
1answer
200 views

Order references alphabetically with “elsarticle-num-names.bst”

How Can I order my references alphabetically using the bibliographystyle "elsarticle-num-names.bst"? Here is a MWE, copied from the elsarticle template folder itself: elsarticle-template.tex: \...
1
vote
0answers
18 views

Help in the citation : how add “et al” in the references

I used this template : \documentclass[a4paper,11pt,oneside]{StyleThese} \makeatletter \def\nospace{% \begingroup \catcode32=9\relax \nospace@} \def\nospace@#1#2{% \def\next{\def#2{#1}}% \expandafter\...
1
vote
1answer
27 views

How to make the text in front of the eqution or figure number become a hyperlink?

I found that in many journals not only the number but also the text such as Fig or Eq can be a hyperlinked so one can be directed to the equation or figure by clicking the hyperlink. This is what is ...
4
votes
3answers
86 views

Remove cross-reference to a footnote, but keep the footnote

I would like to achieve this: Where I can cross-reference a footnote without it showing up as a superscript. However, I don't want to change the behavior of \footnote globally, I just want to be ...
1
vote
0answers
21 views

Lyx References Broken

I lately moved my .lyx file to a different computer. Now all my citations and Formatted cross-references to subsections are broken. Formatted references to sections and images are still working for ...
4
votes
2answers
58 views

How to use \nameref with xstring package to check string length

I need to measure a number of characters in string, that I returned from label through \nameref command. Here is my MWE: \documentclass{article} \usepackage{hyperref} \usepackage{xstring} \begin{...
1
vote
1answer
67 views

Caption in figure and cross-reference them properly

I want to know how should I cross-reference the following caption in manuscript in following way Fig 1a and Fig 1b. \begin{figure} \minipage{0.50\textwidth} \includegraphics[width=\textwidth]{...
2
votes
2answers
74 views

Knitr: How to make a crossreferences to figures and tables generatrd by code chunks?

I would like to make cross-references to images and tables generated from knitr code chunk in the same way as to standard figures and tables. In a standard figure I use control sequence \label, but i ...
11
votes
1answer
197 views

Refer to a node in tikz that will be defined “in the future” (two passes)?

I have devised a small couple of commands to have a nice "callout thing" for my notes; please consider the following MWE (the problem is also explained there): \documentclass{book} \usepackage{tikz}...
2
votes
2answers
62 views

Reference Color

\documentclass[preprint,review,12pt]{elsarticle} \usepackage[colorlinks=true, citecolor=black, linkcolor=black, urlcolor=black]{hyperref} \begin{document} ... \cite{ML1986} ..... ... see \...
1
vote
1answer
116 views

Bad crossref error [closed]

I am using TexMaker on Mac. In my BIB file, I have an item like: @inproceedings{DBLP:conf/wsdm/YeungI11, author = {Ching{-}man Au Yeung and Tomoharu Iwata}, title = {...