{double-sided} is about double-sided document layouts, e.g. different margins for left and right pages or chapters always starting on a right page.

learn more… | top users | synonyms (1)

1
vote
2answers
36 views

How can I preserve the page numbers between a twoside and a oneside layout?

I want to publish a document in both printed and electronic versions. I use twoside,open=right for the printed version and oneside for the electronic version. Due to the empty pages which are ...
2
votes
1answer
29 views

Margins on two-sided documents using LyX

I have an issue trying to set my margins on LyX. I am using a two-sided document, the box for this option is checked. I've set the value of inner margins (4cm) and outer margins (2cm), but on my Pdf ...
3
votes
1answer
46 views

Wrong vertical spacing in twocolumn mode

I want a consistent spacing between the top of the page and the table-of-content-title/ chapter-titles throughout my document. However, in two-column mode, it appears that the space between the top of ...
4
votes
1answer
120 views

print double sided playing cards

My apologies if this is already answered somewhere (typical opening I suppose) but here goes. I've modified code from the thread Creating playing cards using TikZ for the purposes of my needs. Now ...
0
votes
2answers
34 views

Change twoside to oneside mid-document

Title says it all, i've found answers to changing oneside to twoside but the other way around won't work. So is this possible? And if so, how?
4
votes
1answer
91 views

Align horizontal footer rule to outside margin with memoir class

I'm using the memoir document class with the twoside option, and want to use a \textwidth horizontal rule underneath my header, but a smaller horizontal rule above my footer. Unfortunately, the footer ...
1
vote
0answers
55 views

scrbook pagemargins with titlepage [closed]

I've finished writing my Bachelor's thesis and want it printed like a book. So I need to make the inner margins a bit broader than the outer ones ("BCOR"). Additionally, I want my chapters always to ...
1
vote
1answer
104 views

Tufte Fullwidth Bibliography across pages

I am trying to print the bibliography in a tufte-book using the whole width of the page, since I don't intend to put marginalia into the bibliography. Edit: I am using an updated version of tufte ...
4
votes
2answers
40 views

Paragraph numbering (lineno for paragraphs)

How can I add margin numbering for paragraphs? It should be alternating (left and right) for odd and even pages. So basically like lineo with the switch option but for paragraphs instead of lines.
3
votes
2answers
93 views

Automatically switching the margin

I created some new commands to type the question and answer in the margin under "You Try It": \newcommand{\margins}[1]{ \marginnote{ \flushleft{\color{framerule}{Simplify: \; #1}}}[-1cm] } ...
0
votes
0answers
30 views

change the options of documentclass for specific pages

I am using the following document class: \documentclass[11pt, twoside]{Thesis} As far as i understand the twoside option except from changing the margin in a book format style it also starts a ...
2
votes
1answer
59 views

twoside page number alignment on first page

I have a document which doesn't have the first page as "front", but rather the content follows immediately after \maketitle. It starts with: \documentclass[twoside,a4paper,12pt]{article} ...
5
votes
1answer
75 views

Odd/even page wrongly detected if there is not enough space on the current page

I'd like to put: some text on the outer side of the page, some another text on the inner side of the page. For this, I make use of the (\checkoddpage) \ifoddpage test provided by the changepage ...
0
votes
0answers
30 views

brokenpenalty for two sided documents

A hyphenated word where one part is on the left and the other part on the right page of a doubled sided document isn't so bad and sometimes necessary to prevent ugly page breaks. However, I would ...
2
votes
1answer
78 views

Table in double column paper format

I am writing a research paper in double column format but the table is not fitting in the format . It looks like this My table is not displayed properly. This is my code. \begin{table}[!h] ...
4
votes
1answer
84 views

Making marginnote to appear either side of twocolumn, twoside document

I have the following MWE in which the \marginnote need to appear at correct margin. For example the margin notes one, two, three and four need to appear on left margin of first page. In the second ...
4
votes
1answer
75 views

Start only some chapters on right-hand side after a set page/chapter

I'm working on my masters thesis, and have a fairly decent structure (I feel..), but I have one issue. I want my chapters to start on the right-hand side, which in itself is not hard to do. However, ...
0
votes
0answers
53 views

avoid two odd pages one roman and another arabic

I have a two-sided thesis, and tables of contents page numbering is roman and the chapter 1 starts with arabic page numbering. I set higher margin for odd pages, but I dealt with two pages in a row ...
0
votes
0answers
64 views

marginal notes in both margins depending on the page number

The lines of my text are numbered because I'm producing an edition with notes in the bottom. I'd like to have marginal notes as well on the left for even page numbers and on the right for un even page ...
0
votes
0answers
19 views

twoside making wrong margins [duplicate]

I'm using twoside on my article. The first pages in the report (Abstract and preface) has the correct margins (larger margins to the right for left-pages, and larger margins to the left for ...
3
votes
1answer
46 views

Twoside footer produces extra vertical space

The below code produces the correct spacing for odd side pages but incorrect spacing for even side pages. Correct spacing: Wrong spacing: In my attempt to optically distinguish between the two ...
2
votes
1answer
79 views

Equation across a double page

How can I achieve typesetting a long multiline equation across a double page, like this: ________________ | 1 | 2 | | ---- | ---- | | ---- | ---- | | E=|mc^2 | |_______|_______| ? ...
3
votes
0answers
189 views

How to set a binding offset with tufte-book class?

I'm typesetting a book using the tufte-book class. For printing I need to set a binding offset (say, 0.5in). However, I can't seem to get this to work using the geometry package settings as one would ...
7
votes
1answer
269 views

Start a specific chapter on the left page?

Using the book class with the twoside option, I get chapters that start on right/odd pages, which is the expected behavior. Still, I would like to have some specific chapters starting on a left/even ...
2
votes
1answer
85 views

Avoiding widows while keeping text height even across two-page spread

In The Elements of Typographical Style, the author notes (§2.4.8) that widows—single lines occurring at the top of a page—should be avoided. Yet the text height of two facing pages should be the same, ...
2
votes
1answer
61 views

Output pdf margin VS attributed margin in Latex

After a very long search on the net, I post these two questions: The code is: \documentclass[12pt,twoside]{report} \usepackage[a4paper,left=3.5cm,right=3cm]{geometry} ...
2
votes
1answer
95 views

How to switch from one sided to two sided document?

I have been writing a thesis that is currently in one sided layout, but I would like to switch everything except for contents, abstract, acknowledgement and dedication into two sided layout. Is it ...
4
votes
1answer
144 views

Margins for even and odd page using the Memoir class

I have read a lot of posts about this topic now but still I cannot figure out why the even and odd pages has the same margin. I would like them to have different margins to make Space for the spine of ...
11
votes
0answers
402 views

Setting different recto/verso margins size (geometry) on this example

CONTEXT. Because of specific University requirements (1), I had to use this nice code found on tex.stackexchange http://tex.stackexchange.com/a/96366/50507 written by David Carlisle, that was ...
4
votes
1answer
119 views

Table of contents only on right-hand side pages

I need to have a table of contents only on right-hand sided (even) pages, a goal similar to what was described here: Table of content only on right-side pages. However, I have a table of contents ...
0
votes
0answers
110 views

Twoside margin width. How to take into account binding?

I came here to understand why latex had this "odd" habit to set the outer margin wider than the inner in two sided documents. As many have asked before me, I expected the inner margin to be wider to ...
1
vote
0answers
50 views

Problem with adjusting the width of even pages in a two sided document wifh changepage package

I am using changepage package to locally control the text margins of a twosided document. An example of what I am actually doing is the following: \documentclass[twoside]{article} ...
1
vote
0answers
31 views

Force 'openany' half way through document [duplicate]

I am using a double sided document for my report, which always have new chapters starting on a page to the right, which sometimes means leaving a page blank. However, for my appendix I would like to ...
1
vote
1answer
70 views

How remove margin in a paragraph that continues in two pages with different margin?

I've created a document whose margins have different odd and even pages. I want to write a paragraph with no margin in two pages runs. If I use the command \newgeometry new paragraph starts at the ...
1
vote
1answer
169 views

Using titlesec to have \chaptertitle and \sectiontitle in twosided report

I would like to customize the headers of my report. These should contain chaptertitle and sectiontitle. From here: Header not displaying correctly on chapter page due to subsection I have made an ...
2
votes
0answers
31 views

Remove blank page after end of chapter [duplicate]

I have used a double-paged template and it currently creates a blank page such that the new chapter always begins on the left side. However, my report is quite small and I would like to remove these ...
1
vote
0answers
30 views

Problems with two sided print in Latex [duplicate]

I am trying to enable even and odd margins in latex. When I use \documentclass[12pt, twoside]{report}, the structure of report becomes very bad. I am attaching a screenshot of a page. There is ...
0
votes
0answers
55 views

Stop switching content orientation in double-sided article

Is it possible to stop the switching content orientation of appendices when using a double-sided article? I want to keep the same fixed orientation of all figures, but every time an appendix is ...
6
votes
2answers
275 views

How to get two logos side by side

I need to put a logo left side aligned and a logo on the right side, I also need to add text between both logos? I've reviewed the questions about figures side by side, subfigure and minipage, but ...
1
vote
1answer
68 views

Issue with the lengths of the margins in article class in twoside mode

Simply, put the solution to my problem is that for everything before the first section, the odd margin must be swapped with the even margin and vice versa. At the first section, everything must be ...
2
votes
2answers
516 views

How can I print index cards two-sided with multiple cards per page?

There are several answers about "learning cards" here on Stackexchange, pointing to several solutions, but this particular part of it is not my problem. I already designed them, created them (DIN A 6) ...
1
vote
0answers
93 views

How can I influence in which margin the output of \marginnote gets printed?

Is there a way to specify the side of the margin note in a double-sided paper according to where \marginnote is called? The following figure explains what I mean: Here is my test code: %% ...
2
votes
2answers
288 views

Full header in scrbook

I want to produce full header including margin. Even page header is correct. But Odd page header does not include the margin in the left side. \documentclass[12pt]{scrbook} ...
1
vote
0answers
21 views

Force placement of pairs of figures on even and odd page [duplicate]

Is there a possibility to place pairs of figures on the even page and the corresponding odd page, respectively? The scenario is that I have e.g. 2 figures showing the same statistic (separating males ...
4
votes
2answers
231 views

Memoir footnotes in margin with ragged2e

I would like to set up memoir so that when I use \footnote{foo}, foo is displayed in the margin with the proper label and preferably break over pages. There is an option \footnotesinmargin which ...
0
votes
0answers
19 views

In Lyx how do I fix the border shift for binding? [duplicate]

WIth regards to piping answers into Lyx GUI, I am continuing the my question from here. The layout of chapters starting on the odd pages appears to be correct, however the shift left or right I ...
4
votes
1answer
597 views

In Lyx how do I get chapters to start on odd pages

I'm using Lyx and I want the pdf output to print Contents, new chapters and bib on a odd page. How can I do this? What information do you require from lyx? Class is Report. Document > ...
7
votes
1answer
141 views

Parallel paragraphs across odd and even pages

I have a document where paragraphs should be aligned across odd/even (left/right) pages. I use the following code from this answer (courtesy of Nicola Talbot) \documentclass[12pt]{scrbook} ...
1
vote
0answers
157 views

KOMA-Script/Twoside > Extra right margin on odd and even page :-S [closed]

I'm trying to use KOMA-Script with scrbook class but whatever I do, I always have an extra margin on the right of every page. Does anyone have an idea to strip of this space ? Here are some ...
7
votes
1answer
418 views

Misplaced marginpar in twoside+twocolumn layout with pdfpages

\includepdf from the pdfpages package messes up the margin placement for this MWE: \documentclass[10pt,a4paper,twoside,twocolumn]{article} \usepackage[outer=6cm, inner=2.5cm, ...