{double-sided} is about double-sided document layouts, e.g. different margins for left and right pages or chapters always starting on a right page.

learn more… | top users | synonyms (1)

3
votes
1answer
673 views

How to reverse margin of tufte-book?

I want to change position of tufte-book(twoside) class in my thesis. In normal mode, margins for odd pages is on the right side and for evens, is on the left side of page. I want to change the ...
5
votes
2answers
666 views

Does \documentclass{book} by default take care of gutter for inner side of page?

I'm hoping to create a book at the site lulu using LaTeX instead of Microsoft Word, and they say: Leave at least .5" margins on all your pages. Most books will require a gutter of .2" to .3". I ...
2
votes
1answer
171 views

Pre-text (cover, dedicatory, table of contents, list of figures) printed one-sided, rest two-sided

My thesis commitee demands that the pre-text elements, including table of contents, list of figures, list of algorithms goes only on the odd pages, with the body of the thesis go two-sided, with new ...
4
votes
1answer
590 views

Shift Odd Page in Duplex Print

This is more a printer problem, but I have no way to solve it on the printer side. When printing a two sided document, the sides do not match vertically. That means for example the line of ...
9
votes
2answers
1k views

Can I put a logo in the header of a twoside document?

I would like to include a graphics file with a logo in the header of all pages of a twoside document (left and right side). The logo should be left-justified on the left side and right-justified on ...
3
votes
1answer
614 views

Centering the frontpage using memoir

I'm using memoir (two-side layout). I have the problem that my front page is centered with respect to the margins, which are not equal in left and right side. \begin{center} will not solve this, since ...
11
votes
2answers
661 views

Conditional figure environment (sideways, bottom captions)

For my phd dissertation I would like to have a new environment for figures that gives me the possibility to either place the caption sideways if there is enough space (say the figure width is < 0.6 ...
3
votes
1answer
210 views

Rotating figures to point to the outside edge

I am writing my thesis in LaTeX book style. I have a large figure that I want to rotate to make it viewable sideways. I can do this with the includegraphics option angle=90. My question: Is there a ...
1
vote
1answer
185 views

Insert a figure on odd pages

I would like to insert a logo on each odd pages of my document (but the first) I know how to do it for each page but cannot figure out how to only do it on odd pages. So I have \makeatletter ...
7
votes
1answer
142 views

ifoddpage not working

I'm testing ifoddpage but it seems to say that every page is even: \documentclass{article} \usepackage{lipsum} \usepackage{ifoddpage} \newcommand\printpage{% Page is \thepage. It is \ifoddpage ...
4
votes
1answer
111 views

Making text go on the odd page in a book class

In the book class, how do I make sure a particular text I type goes on the odd page? Is there a command to "flush" the current page only if it happens to currently be an even page?
3
votes
1answer
509 views

Combining the caption and fltpage package when using twopage setting in book class

I have run into a strange problem when using the caption package and the fltpage package in the book documentclass with the twoside setting. After eliminating all kinds of variable it turned out that ...
11
votes
1answer
737 views

Marginnote on left side only, using document class book with twoside

I'm trying to use marginnote on document class book with twoside, but I can't see to get the margin notes strictly on the left. I don't want to be putting \reversemarginpar on all the odd pages. Can ...
7
votes
3answers
848 views

Section open right in scrbook

Using scrbook, I would like sections to open on a new odd page, like chapters do. How can I achieve that?
7
votes
1answer
489 views

Different chapter headings for odd and even pages

Is there a way to have different chapter headings for odd and even starting chapters using fncychap with scrbook class? I'm using a personal style (a mix of Sonny and Bjornstrup) that has a large ...
12
votes
1answer
1k views

marginnote always on right side of the page

My documentclass is book, so I've got an even and odd sides. I like that the equation number are always aligned on the right side - independent of the page (even/odd). I started using marginnotes. I ...
8
votes
1answer
7k views

Remove blank page between list of figures and list of tables

Please how can I delete the blank page between List of Figures and List of Tables? I tried this: \listoffigures \nopagebreak[0] \listoftables but nothing changed. Here is my code: ...
1
vote
1answer
267 views

“This page was left intionally blank” on center of page [duplicate]

Possible Duplicate: How do I make pages which were “intentionally left blank”? Assuming I am forcing amount of pages to be even using Raphink's solution : ...
9
votes
3answers
787 views

Forcing even number of pages in output (LaTeX — pdflatex) [duplicate]

Possible Duplicate: How to keep the last page number even? Is there a way of forcing an even number of pages in output ? What I mean is to make pdflatex document "intelligent" it will add ...
7
votes
2answers
5k views

Distinguish even/odd pages in header with oneside option

See the MWE below. How can I achieve (in the standard book class) that despite the oneside option odd and even pages are distinguished in the header? I would like to have that, also with oneside ...
1
vote
1answer
4k views

\evensidemargin & \oddsidemargin geometry package

how can I put this length with the geometry package? \setlength{\evensidemargin}{92.58438pt}% \setlength{\oddsidemargin}{24.38356pt}%
4
votes
1answer
369 views

How do I get LaTeX to output to the right-hand page only?

I am doing a book of poetry for a friend, using Memoir and the poetry package. She would like the poems to print only on the right-hand pages. I can get poems to begin only on right-hand pages, but ...
5
votes
1answer
328 views

Question about changing the position of the footnote rule

My question is after I redefine the length of footrule, the footrule doesn't change the position on even or odd page, it's always at the left side. Did I lost something or there's the other way to ...
2
votes
2answers
2k views

Twoside: headsepline is missing at beginning of a new chapter

Today I changed in my latex document for my dissertation the option to "twoside". After that I got a problem with some headseplines. Everytime when it comes to a new chapter, the first side doesnt get ...
6
votes
1answer
501 views

Remove blank pages after title and Table of contents

I'm using the book style, and I've got a title and ToC, they generate a lot of blank spaces after them that is completely unnecessary; how do I stop this behaviour? Here is my example code ...
15
votes
1answer
284 views

Chapters that openleft unless the chapter is only one page long

I'm using the memoir class, and would like new chapters to begin on the left-hand page, unless the chapters in question are only one page long. Neither openleft nor openany give this behavior. I am ...
2
votes
1answer
646 views

Page layout for two-sided document

In the minimal example pasted below I would like to have: left margin on even pages = 1.5cm right margin on odd pages = 1.5cm (understood as absolute values, not added to/substracted from default ...
4
votes
1answer
2k views

Different headers for odd and even pages

Please help me to design pages with a different title on odd and even pages: I mean I would like to have for example name of author on odd pages. name of article on even pages. How can I do it? ...
12
votes
1answer
2k views

Wrapfigure-Minipage Woes: How do I correctly typeset wrapped text boxes within a \parcolumns environment modified for a two-sided document?

This is a follow-up question concerning an experimental chapter layout I'm trying to implement for a novel I'm writing. So. My initial problem of finding a way to modify the innards of the parcolumns ...
6
votes
1answer
929 views

twoside introduces incorrect linespacing at end of section

I have: \documentclass[a4paper,11pt]{report} with no special customisation. In one page, at the end of a section, I have a big figure with two paragraphs of text below it, and these two paragraphs ...
2
votes
1answer
972 views

Handling header part in report class

I have a small problem with the report class file. Actually I need that the odd pages have chapter title and page number in the header, while the even pages should have page number and chapter title. ...
4
votes
1answer
823 views

Figures on left pages, text on right pages

I'm writing a thesis in the book document class and I'm using a lot of figures to explain the working method. If I use the method proposed in Figures on left pages, text on right ones with class book, ...
4
votes
1answer
255 views

How can I place marginal notes always on the right but show normal odd/even headers?

I would like to typeset a book where the odd/even pages have the same format: each has a long text section on the left and a place to put small marginal notes on the right. If necessary, I want the ...
4
votes
2answers
116 views

How can I allow lists to appear on odd page?

\documentclass[12pt,a4paper,openright]{mwrep} \usepackage[top=2cm,bottom=2cm,left=3cm,right=2cm,twoside]{geometry} \usepackage[section]{minted} \usepackage{lipsum} \begin{document} \tableofcontents ...
25
votes
1answer
1k views

How can I reverse the positions of two (unequal width) columns so that the wider one is always against the inner margin?

I'm new to LaTeX and I'm trying to use it to write a spotlessly-typesetted draft of my novel (from the rough, typewritten hard draft) for MFA program applications, and eventually to send to ...
6
votes
1answer
938 views

Switch from two sided to one sided type

I'm trying to write a document using LaTeX using IEEEtran.cls (two sided by default). In my document, I have a portion of code, which has a big width. It would look nice to switch from the two sided ...
3
votes
2answers
862 views

Geometry Package - Layoutoffset: Distinction Between Odd and Even Pages Possible?

Currently I'm preparing a book for publishing. My printer wants a non-circumferential bleed around the pages, 0.125" at the top, bottom and outer side, but no bleed at the inner side. As far as I have ...
6
votes
4answers
764 views

Switch to one-sided mode in the appendix of a double-sided document

I have a larger document (book class) which should be typeset double-sided, i.e. with the twopage class option. However, in my appendix I have some technical diagrams which should not be printed ...
9
votes
2answers
6k views

Centered title page in twoside report

I'm writing my thesis using a twoside report. However, when it comes to the title page I think I want to have it centered i.e. the left margin and the right margin to be equal. How can I achieve this ...
21
votes
5answers
2k views

How I can automatically add a page if the total number of pages is odd?

I need automatically add a blank page (also without document header, numbering and footer) at the end of the document, if the total numbers of pages is odd. How I can do that? And preferably without ...
7
votes
1answer
712 views

How can I make selected sections always start on an even page when using document class article or book?

The reason I want this is as follows: I want my printed paper reports to have a results section where the result description is on the left side of a facing double page, and the results table is on ...
13
votes
1answer
2k views

Placing figure on an even/odd page

I'm writing a two sided document (it will be printed as a book) and I've got two figures which takes up a whole page each. These two figures are related so I want them to be side by side in the ...
2
votes
1answer
129 views

How to make specific items only appear in recto pages in ConTeXt?

I would like for some items in my book to begin only on recto, or right-hand pages, such as, e.g.: The first page. The table of contents. The beginning of a \part. I believe such a configuration ...
2
votes
1answer
213 views

How to give different margin sizes for verso and recto pages in ConTeXt?

I am creating a simple page layout for a book, which should have 1 cm margins along the top, bottom, and edge, but leave 3 cm in the middle margin, where the pages will be glued together. ...
2
votes
1answer
488 views

Problem when imitating one-sided printing with double-sided printing in Memoir Class

I use memoir class and I imitate one-sided printing with double-sided printing thanks to the command (find in the memoir manual) \setlength{\evensidemargin}{\oddsidemargin} The problem is that I ...
5
votes
2answers
250 views

Make all pages odd

I have a memoir document, with custom settings for margins, headers and footers, etc. I just found out it is being printed single-sided instead of double-sided, and I was wondering if there is a ...
10
votes
2answers
193 views

How to make different caption placement for figures on odd and even pages?

For small figures, I want for captions to go on the right or on the left depending on the page number, whether it is odd or even. To do that I define the command \row as follows: ...
3
votes
1answer
345 views

doublepage but with almost every leftside blank

Short Version Can I create a pdf for doublepage print where the left pages does not interact with the pagecount and having most of them blanks while content on others? Long version I have a printer ...
10
votes
1answer
558 views

How to make all figures float on the outer margins of two-side document?

I want to make a double-sided problem booklet that contains several questions. Each question has a distinct number and may have zero or more figures. Each figure has a caption and floats on the outer ...
9
votes
1answer
2k views

Centered page numbers although set “twoside” option

Using article class and the twoside option still gives me the page numbers in the center of the page. Isn't the twoside option supposed to put the page numbers on the left in even pages and on the ...