{double-sided} is about double-sided document layouts, e.g. different margins for left and right pages or chapters always starting on a right page.

learn more… | top users | synonyms (1)

0
votes
0answers
152 views

fullwidth environment doesn't work across pages [duplicate]

Possible Duplicate: How to switch between two margin sizes? As a young in LaTeX days now trying to find a solution to my problem. I try to use fullwidth command at tufte-book but because ...
10
votes
1answer
1k views

How to switch between two margin sizes?

This question led to a new package: fullwidth This is a followup to a similar question. The idea is to switch between two different margin sizes. The answer provided by @godbyk work very well. ...
4
votes
1answer
278 views

Horizontally centered figures in twoside margin of book using wrapfig

I would like to put figures in the outer margins of a book. I am using wrapfig to do so, but the figures are aligned differently on even and odd numbered pages. On odd pages, they align based on the ...
3
votes
1answer
370 views

Odd problem with spacing using memoir when switching from oneside to twoside

For reasons I won't bore anyone with, I being forced to change my document at the last minute from oneside to twoside using memoir. However, when I do, I suddenly get odd problems with spacing; the ...
1
vote
1answer
520 views

Make page numbers alternate between the right and the left corner when using apa.cls

I'm using the apa.cls (with the doc-style option) to typeset my document. This puts the number of each page in the top right corner. However, I'm going to print this document so I would like every odd ...
16
votes
1answer
1k views

Two-column LaTeX class for a photobook

I am looking for a solution to produce a two-column(ed) LaTeX-based photobook. Text and comments should go on the outer column (in a two-sided document)--something like a wide outer margin. Photos ...
6
votes
2answers
2k views

Add white page after table of contents before abstract

How can I add a white pages after the table of contents in order to have the abstract on a right page? If I add \clearpage \newpage I cannot get the white page added. Ideas?
0
votes
1answer
366 views

Figures on left pages, text on right ones with class book (cont.)

In addition to the very useful discussion Figures on left pages, text on right ones with class book, numbering only on right pages, I would like to handle 2 other features: the suppression of blank ...
6
votes
1answer
1k views

How do I make a figure that spans a spread of two pages? [duplicate]

Possible Duplicate: How to include a picture over two pages, left part on left side, right on right (for books)? I have a huge TikZ graphic inside a figure environment. I would like it to ...
1
vote
1answer
1k views

Appendices one after another

I am writing a document with the following documentclass: \documentclass[a4paper,twoside,openright,12pt]{report} Since I have some Appendices to the text and they are rather small, I was thinking ...
6
votes
2answers
1k views

Equations in the margin: automatic flush right or left?

How can I automatically have equations in a \marginnote aligned flush left or right in a two-sided document? A previous question suggested to make equations flush left by using flalign* and extra ...
4
votes
1answer
2k views

Forcing new chapter not to start on an odd page [duplicate]

Possible Duplicate: Chapter on the right side - How to turn it off? I am using a document class amsbook which I like very much, except for one thing: each new chapter starts on an ...
3
votes
1answer
1k views

Including a two-page size picture?

This is question with regards to the previously asked question How to include a picture over two pages I think this is a great little bit of code, however it doesn't seem to be working for me. I've ...
4
votes
2answers
5k views

Changing oneside and twoside layout

Is there any solution to use different layouts according to the oneside or twoside specification? The first part of my report (abstract, ToC, LoF, LoT) should be in oneside mode and the rest of the ...
4
votes
1answer
285 views

Suggestion of activities calendar in LaTeX

Is there any way to make a kind of activities calendar to put five activities per month in LaTeX, what would you recommend to make it look nice. Something like: Month Activities ...
3
votes
3answers
6k views

How to force LaTeX to put even pages on the right hand side in documentclass article

In documentclass article I try to put even pages on the right hand side of a twoside document (unfortunatelly it is no option for me to change the document class). My point is to start with ...
3
votes
2answers
993 views

Different \marginparsep for odd and even pages?

What is the most robust way of increase the effective \marginparsep on even pages only? I have been playing with outdented lists, section heads etc. which leads to an issue with margin notes: I need ...
3
votes
1answer
1k views

Chapters only on even pages, sections without pagebreaks?

I'm having a few questions about KOMA script configuration and would love if you guys could help me out: How can I make all chapters only appear on even pages? How can I make all sections NOT have ...
7
votes
0answers
135 views

How to put one big image on each page [duplicate]

Possible Duplicate: How to include a picture over two pages, left part on left side, right on right (for books)? The problem is the following: I am formatting a twopage book on latex and I ...
6
votes
1answer
347 views

Equation tag in twoside-mode outer

At the moment I thinking about the following think. When I use the twoside mode to write a book I want to print the number of the equation outer. I can modify it manually with these two commands: ...
4
votes
3answers
2k views

Same margins when specifying “twoside” in memoir?

I'm using the memoir document class with options openright and twoside. However, as the document will be printed on regular paper instead of being binded into a book, I wish the left and right margins ...
3
votes
2answers
2k views

Make titlepage one-sided (centered) while all other pages are two-sided

I am using scrbook to write a small paper. I am trying to create a title page which displays its contents (title, author, institution) with a one-sided layout, while all other pages should use a ...
0
votes
1answer
325 views

Include a file (chapter)

Is it fair to assume that if an \include command does not add a blank page both before and after, it is because the chapter starts on a page with an odd page number ? EDIT: I thought I was having ...
3
votes
1answer
2k views

Odd pages should be right

I'm writing a document using srcbook. It has quite many pages and I have the following scenario: The first ~10 pages are numbered with small roman numbers (i.e. i, ii, iii, iv, v, vi, vii, ...). ...
3
votes
1answer
416 views

What is required to format a document with alternating margins?

What is exactly the command or the document class which is required to format a document such that it has alternating margins? Default values for margin space which are appropriate for dissertations ...
3
votes
2answers
1k views

Blank pages header [duplicate]

Possible Duplicate: How to remove head- and footlines for pages between chapters? I have a problem that I'm not able to solve with LaTeX: I'm in book mode. Then LaTeX leaves a blank page ...
66
votes
1answer
4k views

How to include a picture over two pages, left part on left side, right on right (for books)?

When writing a long book (from 300 to over a 1000 pages), there is often need to include large pictures and one wishes to have them displayed over two pages, left half on the left page, right half on ...
3
votes
1answer
1k views

Set up sidewaysfigure to have the bottom of the figure toward the spine

I am typesetting a book. There are a couple figures that are wider than they are tall, and appear too small if placed on a page in the usual fashion. I have found that using the sidewaysfigure ...
11
votes
1answer
1k views

Chapter on the right side - How to turn it off?

As a documentclass I use book. Chapters always start on the right hand side. How can I turn it off? I don't want to have empty pages. I don't care on which side starts new chapter.
5
votes
1answer
2k views

openright in book class not taking effect

I have the following command in my preamble: \documentclass[letterpaper,twoside,openright]{book} But \chapter{}s still start on the left. I have seen this thread and this thread but the solutions ...
8
votes
2answers
512 views

How can I add margin notes on inner side of a page in two sides mode?

How can I add margin notes on inner side of a page only for even pages in two sides mode?
4
votes
2answers
4k views

sidewaystable vs landscape environment (pdflscape-package) for landscape tables spanning double pages

As explained in several other posts, I'm currently trying to create wide tables. The document is in portrait format A4, but the tables shall be typeset in landscape format. As the tables have more ...
14
votes
3answers
7k views

How to display cover page alone in the “two page view” mode

For some pdf ebooks, Adobe Reader displays the cover page alone even though the display mode is "two page view". Other than the cover page, the rest of the pdf content is displayed as two pages at ...
0
votes
1answer
2k views

Report, how to start with a “right”-page?

I am writing a report and use the following preamble: \documentclass[10pt,b5paper,twoside]{report} \usepackage[lmargin=25mm,rmargin=25mm,tmargin=27mm,bmargin=30mm]{geometry} Now latex think that ...
3
votes
4answers
2k views

How to have a blank even page before every chapter

I've started to use Latex to create a book. I feel like I've gotten the basics down, but I am still very much at the beginning of my learning curve. Google has been a great resource, but I have not ...
4
votes
0answers
436 views

Ensure last page is even and blank [duplicate]

Possible Duplicate: How I can automatically add a page if the total number of pages is odd? I am writing a report in two-sided mode. Report is based on the erdcclass file (with ...
3
votes
1answer
2k views

KOMA handling of even/odd pages

I don't know if this is a bug or a configuration option that I've missed, but I've just noticed that in my document, KOMA script is putting odd pages on the right and even on the left, and yet the ...
17
votes
2answers
1k views

Figures on left pages, text on right ones with class book, numbering only on right pages

My problem is that I would like to have either blank or figures on the left pages, and text on the right ones, with the numbering of the right pages to be 1,2,3,4,5 and not 1,3,5,7. It means, in a ...
1
vote
1answer
373 views

Alternating offsets for logical pages within larger physical pages

I'm typesetting a book using dblatex/XeLaTeX that will be printed 2-Up on 8.5x11 paper (double sided), then cropped to a smaller size and bound. I have external tools to take a pile of 5.5x8.5 pages ...
8
votes
1answer
291 views

Chapter on any page, but recto after part

Using the book style, I need chapters to start on anypage (as in openany) BUT to be recto after a part (which is also recto). fussy eh!
4
votes
1answer
545 views

marginfix makes KOMA's \marginline flush towards the outside, rather than the inside?

The marginfix package seems to do something funny to KOMA's \marginline command. Here is an MWE: \documentclass[mpinclude=true]{scrbook} \usepackage{lipsum} \usepackage{marginfix} ...
4
votes
1answer
3k views

Remove unnecessary blank page after creating an appendix

Declaring appendices, an unnecessary blank page is created immediately after. Leaving a 1-page break before the first appendix!? How can this blank page be removed. MWE below. ...
12
votes
2answers
7k views

How to force output to a left (or right) page?

I am putting together a document that has several cover pages, both for front and back cover. The bulk of the document is two-sided. Cover pages, however, must be right-side (or left-side, for the ...
4
votes
1answer
351 views

Marginnote with geometry package

In my document i'm using the packages geometry and marginnote. The problem ist the following: If I use a newgeometry, the marginnote will stay on odd pages at same horizontaly position as by the ...
8
votes
1answer
778 views

How to make landscape mode rotate properly in a twoside book?

How can I use pdflscape (or some other?) package in a twoside book so that landscape mode is always rotated so that top of the page points to the middle of the book? By default it seems landscape mode ...
10
votes
3answers
3k views

Two-sided document: reverse page margins for hardcopy

Background Wrote a manual in LyX. The PDF is two-sided. Using KOMA Script v2. The pages are 8.5" x 11". Problem The spacing on the margins is not printer-friendly, it is reversed: Since this ...
2
votes
3answers
1k views

Twosided book with same page setup for every page (I want to use fancyhdr)

Here is my problem: Im writing my thesis using the book class. I want my thesis to be onesided (left and right margins of same size), but I would also like to use the fancyhdr package to give me ...
3
votes
2answers
489 views

Is there package to create a “Problem-Solution” environment that is symmetric for “twoside” pages?

Background The following screenshot shows a Problem-Solution environment that is symmetric for twoside papers. NOTE: The problem heading is on the right side for odd-numbered pages. For ...
9
votes
1answer
1k views

When using a book class (memoir), text shifts from left to right on each page

I'm very new to latex, and I've noticed that using a book class causes the text on one page to be on the right and then left on the next and so on. I'd like for it to all to be on the left or ...
14
votes
1answer
4k views

How to start new chapters on the right hand side

I use the report document class, and I would like that chapters always start on the right hand side, anyone an idea how this could be easily done?