{double-sided} is about double-sided document layouts, e.g. different margins for left and right pages or chapters always starting on a right page.

learn more… | top users | synonyms (1)

1
vote
1answer
128 views

How to split a footnote only to odd pages

I have a document which uses the eledpar package to edit parallel texts. On the even pages, I have a original text from an author and on the odd pages I have my commentary of the text. All is ...
4
votes
1answer
31 views

Table of contents only on right-hand side pages

I need to have a table of contents only on right-hand sided (even) pages, a goal similar to what was described here: Table of content only on right-side pages. However, I have a table of contents ...
0
votes
0answers
41 views

Twoside margin width. How to take into account binding?

I came here to understand why latex had this "odd" habit to set the outer margin wider than the inner in two sided documents. As many have asked before me, I expected the inner margin to be wider to ...
1
vote
0answers
25 views

Problem with adjusting the width of even pages in a two sided document wifh changepage package

I am using changepage package to locally control the text margins of a twosided document. An example of what I am actually doing is the following: \documentclass[twoside]{article} ...
1
vote
0answers
28 views

Force 'openany' half way through document [duplicate]

I am using a double sided document for my report, which always have new chapters starting on a page to the right, which sometimes means leaving a page blank. However, for my appendix I would like to ...
1
vote
0answers
31 views

How remove margin in a paragraph that continues in two pages with different margin?

I've created a document whose margins have different odd and even pages. I want to write a paragraph with no margin in two pages runs. If I use the command \newgeometry new paragraph starts at the ...
1
vote
1answer
36 views

Using titlesec to have \chaptertitle and \sectiontitle in twosided report

I would like to customize the headers of my report. These should contain chaptertitle and sectiontitle. From here: Header not displaying correctly on chapter page due to subsection I have made an ...
2
votes
0answers
28 views

Remove blank page after end of chapter [duplicate]

I have used a double-paged template and it currently creates a blank page such that the new chapter always begins on the left side. However, my report is quite small and I would like to remove these ...
11
votes
2answers
565 views

How to float until on left (or right) page?

I have two sideways tables that I want on two facing pages so the reader can turn the entire book and read them both in one turn. For the moment I keep moving them around to keep them on facing pages. ...
6
votes
1answer
2k views

How to prevent the paragraphs to spread out over the page?

I have a problem. I have several large equations within the text. And when LaTeX does not manage to put the equation on the same page and moves it to the next one, he spreads the paragraphs of the ...
1
vote
0answers
30 views

Problems with two sided print in Latex [duplicate]

I am trying to enable even and odd margins in latex. When I use \documentclass[12pt, twoside]{report}, the structure of report becomes very bad. I am attaching a screenshot of a page. There is ...
2
votes
2answers
154 views

How can I print index cards two-sided with multiple cards per page?

There are several answers about "learning cards" here on Stackexchange, pointing to several solutions, but this particular part of it is not my problem. I already designed them, created them (DIN A 6) ...
0
votes
0answers
31 views

Removing headers on pages between chapters while using \include to input chapters

I am writing a document using the report class with the options twoside and openright. I want to remove headers and footers from blank pages between chapters. I tried the emptypage package as well ...
0
votes
0answers
41 views

Stop switching content orientation in double-sided article

Is it possible to stop the switching content orientation of appendices when using a double-sided article? I want to keep the same fixed orientation of all figures, but every time an appendix is ...
7
votes
1answer
220 views

Full-width figure, odd/even pages + margin

situation I'm using the memoir class, two-sided. I left place for margin notes. Thus the text block is not at the center of my "sheet of paper" and this non-central position is different for odd and ...
1
vote
1answer
44 views

Issue with the lengths of the margins in article class in twoside mode

Simply, put the solution to my problem is that for everything before the first section, the odd margin must be swapped with the even margin and vice versa. At the first section, everything must be ...
6
votes
2answers
71 views

How to get two logos side by side

I need to put a logo left side aligned and a logo on the right side, I also need to add text between both logos? I've reviewed the questions about figures side by side, subfigure and minipage, but ...
2
votes
2answers
131 views

Full header in scrbook

I want to produce full header including margin. Even page header is correct. But Odd page header does not include the margin in the left side. \documentclass[12pt]{scrbook} ...
1
vote
0answers
64 views

How can I influence in which margin the output of \marginnote gets printed?

Is there a way to specify the side of the margin note in a double-sided paper according to where \marginnote is called? The following figure explains what I mean: Here is my test code: %% ...
12
votes
2answers
955 views

How to create twoside book with oneside margin?

I want to make a twoside book with oneside margin such: odd pages: even pages: full header, with margin figure(or table): I used tufte-book class, but cannot set margins as i need. It's margins ...
1
vote
0answers
19 views

Force placement of pairs of figures on even and odd page [duplicate]

Is there a possibility to place pairs of figures on the even page and the corresponding odd page, respectively? The scenario is that I have e.g. 2 figures showing the same statistic (separating males ...
4
votes
2answers
108 views

Memoir footnotes in margin with ragged2e

I would like to set up memoir so that when I use \footnote{foo}, foo is displayed in the margin with the proper label and preferably break over pages. There is an option \footnotesinmargin which ...
13
votes
1answer
170 views

How can one ensure that footnotes page-wrap only from verso (back, even-numbered) to recto (front, odd-numbered) pages?

How can one ensure that footnotes page-wrap only from verso (back, even-numbered) to recto (front, odd-numbered) pages? With the following code, the line to which the second footnote is attached ...
23
votes
5answers
5k views

How to remove headers and footers for pages between chapters?

To ensure that a new chapter starts on a right-hand page, the book class (and the report class with the options twoside and openright) will insert blank pages between chapters if necessary. However, ...
0
votes
0answers
17 views

In Lyx how do I fix the border shift for binding? [duplicate]

WIth regards to piping answers into Lyx GUI, I am continuing the my question from here. The layout of chapters starting on the odd pages appears to be correct, however the shift left or right I ...
3
votes
1answer
115 views

In Lyx how do I get chapters to start on odd pages

I'm using Lyx and I want the pdf output to print Contents, new chapters and bib on a odd page. How can I do this? What information do you require from lyx? Class is Report. Document > ...
7
votes
1answer
96 views

Parallel paragraphs across odd and even pages

I have a document where paragraphs should be aligned across odd/even (left/right) pages. I use the following code from this answer (courtesy of Nicola Talbot) \documentclass[12pt]{scrbook} ...
2
votes
2answers
125 views

Header on even or odd pages

Hi everyone I have been trying to create a different header for even or odd pages where I want to see the name of the section and the name of subsections. This is what I have done but it is not ...
17
votes
1answer
258 views

Footnotes per page spread

Now, I heard of footnotes per page, section, chapter, part or document, used all of them, but recently I got a (strange?) request to have footnote counter reset per page spread, i.e., after every odd ...
1
vote
0answers
92 views

KOMA-Script/Twoside > Extra right margin on odd and even page :-S

I'm trying to use KOMA-Script with scrbook class but whatever I do, I always have an extra margin on the right of every page. Does anyone have an idea to strip of this space ? Here are some ...
0
votes
0answers
85 views

putting a logo in a classic-thesis report

I am currently writing some documents using the template that is present at this link: http://www.lorenzopantieri.net/LaTeX_files/TesiClassica.zip It uses koma-script and ...
25
votes
1answer
896 views

How can I reverse the positions of two (unequal width) columns so that the wider one is always against the inner margin?

I'm new to LaTeX and I'm trying to use it to write a spotlessly-typesetted draft of my novel (from the rough, typewritten hard draft) for MFA program applications, and eventually to send to ...
5
votes
1answer
159 views

Misplaced marginpar in twoside+twocolumn layout with pdfpages

\includepdf from the pdfpages package messes up the margin placement for this MWE: \documentclass[10pt,a4paper,twoside,twocolumn]{article} \usepackage[outer=6cm, inner=2.5cm, ...
6
votes
0answers
90 views

Notes and page bibliography on verso pages

I thought this would sound crazy, but there have been similar questions already: Placing text and footnotes on separate pages A pagestyle with note taking area on the verso page Figures on left ...
7
votes
1answer
173 views

How to flip even/odd page style?

I write a document that is to be printed 2-on-1 (on A4 paper) so double-sided layouts seem reasonable, e.g. for margins. Therefore, I use scrartcl with twoside. My problem is that this assumes that ...
3
votes
4answers
3k views

How to have a blank even page before every chapter

I've started to use Latex to create a book. I feel like I've gotten the basics down, but I am still very much at the beginning of my learning curve. Google has been a great resource, but I have not ...
16
votes
2answers
702 views

Package for game/playing cards (not only poker)

Is there a package to design playing cards (NOT ONLY POKER and similar card games, but board games like this and that) in TeX (and friends)? I'm well aware of this one and a half years old topic ...
0
votes
1answer
60 views

Forcing two tables to be at the top of the page on facing pages

The person at the desk next to me is writing his Ph.D. thesis, and is trying to decide how to lay out some tables. He has too much data for one table, but is not a fan of rotated tables. So we were ...
4
votes
2answers
142 views

Remove blank pages in twosided book class without openany

I am writing my thesis using \documentclass[12pt,a4paper,twoside]{book} At the end of chapters, I get a blank page. This is because chapters start from right side (Odd page number, [RO] and that ...
0
votes
0answers
41 views

inserting two column image in desired place

I am creating an IJCA article.I have a situation where I have to insert a two column image at some place.After that normal text follow.I used the package float.I am attaching the code below. ...
5
votes
2answers
93 views

How to override a subclass of book to get TOC on even page?

I am trying to get my table of contents on a verso page (i.e., an even-numbered one). I have seen several threads on similar topics here, and many of them recommend making your own command more or ...
1
vote
0answers
54 views

How can I change the side of all (or single) pages of a twoside book?

My book's first page is righthanded the second page is lefthanded the third righthanded and so on but I want it of the form: first page to be lefthanded the second page to be righthanded the third ...
6
votes
1answer
216 views

Memoir class forces recto page after \mainmatter

The memoir's \mainmatter forces the next page to be a recto page. How can I disable that?
1
vote
0answers
105 views

How to make landscape mode rotate in a twoside book both for pdfviewer and printer?

I wanted the even pages' text, to face outwards, to be easy to read the text/table. I combined two different approaches that made the desired result happen for the pdf viewer. But when I print the ...
5
votes
1answer
652 views

twoside introduces incorrect linespacing at end of section

I have: \documentclass[a4paper,11pt]{report} with no special customisation. In one page, at the end of a section, I have a big figure with two paragraphs of text below it, and these two paragraphs ...
5
votes
2answers
359 views

Addmargin on even and odd pages

I have large outer margins and I want some time more text, on the left for even pages and on the right for odd pages. I tried: \begin{addmargin*} ... \end{addmargin*} But the result is good only ...
1
vote
1answer
120 views

twoside page, outside border on right side smaller than on the left

I have to hand in my thesis tomorrow and it's not working. I want to print it like a book (print front and rear of a page). That's why I am using twopages. But the outside border is different for the ...
1
vote
1answer
392 views

Page numbering and binding offset

I have a two-sided document with a few unnumbered introductory pages, and I want to start page numbering from 1 after these pages. To do that, I suppress page numbers with \pagenumbering{gobble}, and ...
4
votes
1answer
459 views

Switch to one-side layout in KOMA-Script scrbook

I'm using scrbook as document class for my thesis. The two-page layout is just fine in general, but I want the Appendix to be one-sided only. I read the following post Switch to one-sided mode in the ...
3
votes
2answers
269 views

How to remove margin notes space in book class?

By default, the "book" class produces a layout with a big space for margin notes. One consequence of this behavior is the binding side has a smaller margin than the other side (with the twoside option ...