{eps} is about using files in the Encapsulated PostScript format with TeX.

learn more… | top users | synonyms

0
votes
1answer
95 views

Which software should I use for making high quality graphs? [closed]

I have written a paper in MS-Word. Now, I am converting it into LaTeX. The problem that I am facing is about figures. Some of the figures I have converted using Adobe Illustrator. However, since I ...
1
vote
0answers
17 views

Eps figures are not diplaying? [duplicate]

I am using texmaker and I include eps figures. The code is very long but I will include some of it. \documentclass[draft, 12pt, onecolumn]{IEEEtran} \usepackage{graphicx} \usepackage{epstopdf} ...
0
votes
0answers
14 views

eps and ps images are not displayed in ACM SIG template PDF

I was trying to compile ACM Latex2e template pdf on my RHEL 6 machine with the command pdflatex --enable-write18 sigproc-sp.tex. The compilation goes fine with some warnings: This is pdfTeX, Version ...
2
votes
0answers
28 views

How to view opacity in .eps file after latex+dvi2ps+ps2pdf?

I'm trying to use an image with any part with opacity of 50%. The .eps file is ok, and I can view it well, with the transparent region in a viewer like xnview. The problem is that when I compile my ...
1
vote
1answer
43 views

error “ps2pdf returned exit code 1”

I´m trying to compile a doc with an .eps. I use Winedt 9, and I use LATEX + DVI2PS + PS2PDF All runs well with LATEX compilation, and with DVI2PS, BUT... when I use PS2PDF I obtain this message: ...
2
votes
0answers
72 views

Eps file looks funny in compiled pdf

I'm trying to include an eps file in my tex file. The tex file compiles fine, but the image in the pdf is only a small part of the actual image. The strange thing is that there are other eps files ...
1
vote
1answer
73 views

Facilitate switching between latex (eps) and pdflatex (png/pdf) in the same paper

I have to hand in a postscript version of my paper for a conference, so I have to use latex instead of pdflatex. As I may later need a different version, I would like to write the paper in such a way ...
0
votes
0answers
64 views

Is there a way to embed Type 1 fonts into an Encapsulated PostScript file?

The solution to "pictures in TeX" I first encountered in the TeX-implementation "TeXtures", produced by Blue Sky Research in Portland, Oregon. This solution requires you to import an eps-file by means ...
0
votes
0answers
34 views

\includepdf: Main file doesn't compile while included file does

I have a subfile with several figures (.eps, .pdf and .png), which I include in a main file using \includepdf. This worked fine until I changed some pictures from .png to .eps. The subfile still ...
3
votes
1answer
39 views

Unexpected result when converting image from DVI to EPS

This question follows on from a prior question but is separate and can stand alone. The prior question is at pst-plot graph offset on page when graph has non-zero origin. This question is related to ...
0
votes
1answer
69 views

Inserting eps file into Quantitiave Finance's document class

I'm putting together a paper for submission to the journal of quantitative finance, they provide a latex template: ...
1
vote
1answer
92 views

Adding a EPS file to a cover letter created by newlfm package

I am working on a cover letter provided by latextemplates.com that uses newlfm package: http://www.latextemplates.com/template/long-lined-cover-letter I would like to add my signature (as a EPS) ...
1
vote
0answers
75 views

eps image not identical to original after compiling [closed]

I have created an eps image with gnuplot (terminal postscript enhanced eps), that is just what I wanted But when I put this image in a tex document and compile a pdf with latex dvips andps2pdf, I ...
3
votes
1answer
126 views

How to use `epstopdf` in batch mode?

The top voted answer to the following question is a really good way to convert eps files to pdf. What are good ways to convert EPS to PDF? I really prefer it over ps2pdf because it preserves the size ...
1
vote
0answers
94 views

How to convert the latex file into postscript file

I have faced one problem. Actually, I'm working on IEEE paper, and they said that I have to convert my .tex files into postscript file How can I get postscript file? I'm working with WinEdt 8.0 ...
0
votes
0answers
63 views

Using \vspace in articles

Is using a \vspace{} command a stable/proper way to remove the white space in the figures while using it in an article? If not, then can anyone suggest me a quick fix to this? FYI, I am making .eps ...
2
votes
1answer
94 views

PSfrag isn't working to add LaTeX symbols to eps figures

I have converted a jgraph file to eps, and am trying to replace text in the eps figure with LaTeX symbols. I have followed the instructions listed in this question but the solution suggested does not ...
2
votes
1answer
105 views

Why do eps images do not show TexLive2014? [closed]

I want insert my university logo that is .eps format with xelatex. but that do not show. my TexLive version is 2014. Why do eps images do not show TexLive2014?
0
votes
0answers
88 views

Insert and compile EPS

I want to upload an .eps figure in my latex, i read this thread Why doesn't LaTeX allow me to import my .eps file when I compile it? Although i got confused, is TexMaker able to convert .eps ...
3
votes
1answer
121 views

EPS to PDF conversion done by pdflatex is blurry

I have done a figure using TikZ that uses the shadows.blur package. Using qtikz (my TikZ editor), I have exported the image as an eps file. In my document, I use \includegraphics{theimage} and ...
2
votes
0answers
61 views

Convert included .eps files to .pdf with xetex during the first compilation only

Is there a way to have xetex convert .eps files, included with \includegraphics, to .pdf during the first compilation only and subsequently use the generated .pdf files, as pdflatex does?
3
votes
1answer
87 views

Tikz generated EPS not opening with other applications like illustrator or GIMP?

A similar question has already been asked but hasn't got an answer. I am generating EPS images using tikz externalise library. When I use those EPS images back in a different latex document they work ...
0
votes
0answers
56 views

Enhancing images

Can someone please help me with enhancing images and increasing dpi in Latex? I have come a long way, but took FOREVER to figure out how to format a table, and then format equations and matrices - I ...
1
vote
1answer
223 views

Convert eps figure to grayscale without removing white space around the figure

I use eps2eps command followed by pscol command which convert color eps to grayscale. But this combination remove white space around the figure (which is probably done by eps2eps command). Directly ...
1
vote
1answer
256 views

DVItoPDF gives an error

I have previously compiled my tex file with images, and everything worked alright. Lastly, I have changed only the text in my tex file and when compiling the pdf I received in error of DVItoPDF due to ...
1
vote
1answer
108 views

Figure at the wrong vertical and horizontal position

I'm trying to add an eps figure to my document. I'm using Texniccenter 2.02 and Miktex. In the output document the picture moves about a third to the right and to the top. It then exceeds the page ...
3
votes
1answer
216 views

Latex is making-Tikz generated pdf figure, converted to eps, and then included to latex document using \includegraphics- transparent

At the out set, I must say I have just started using Tikz. I draw a picture using Tikz. It generated pdf output which I converted to eps (required figure format for submission in a journal) using ...
0
votes
0answers
58 views

How to edit eps images in TPX

I am making some plots in Matlab and then I save my plots as eps file as I want to get very hight quality images in latex docuement. But I need to edit my plots sometimes to put some comments etc on ...
0
votes
0answers
20 views

insert figure in latex [duplicate]

I'm using latexian to write my latex file. I need to insert a figure in it. I created a "plots" folder in my Latex folder and my code is as follow: \begin{figure}[h] \includegraphics{plots/fig1.eps} ...
3
votes
1answer
69 views

Relative path issue with epslatex

I'm trying to include a figure which is saved as two files (eps and tex). I can get it to work if the files are in the same folder as the main document, but not if I move them elsewhere, even just to ...
0
votes
0answers
20 views

Problem with .eps images in Texmaker 3.5.2 [duplicate]

I'm using Texmaker 3.5.2 (with Texlive) to write a paper having .eps-images. If I try to include .eps-images, I get the following error: Here is my Texmaker configuration: Any ideas how to fix ...
5
votes
2answers
2k views

How to reduce the size of an .eps file?

I know that this issue is not LATEX, but I think that it´s usefull for me and for others, because .eps is very used with latex. I have 15 .eps files of 4 MB, and I note that it´s a little heavy to ...
0
votes
1answer
118 views

using subfig (side-by-side) figures

I used the package subfig for my first time, I got this error: ! LaTeX Error: File figures/Rnefft1310' not found. ! LaTeX Error: Filefigures/imt1310' not found. However, I am sure the file is there as ...
1
vote
2answers
610 views

Including .eps figure in PDFLatex

This question has been asked a lot, but for reason I cannot get it to work. I'd like to include a .eps image in my document - I am using pdflatex in TeXMaker. Below is the input (I am providing the ...
5
votes
1answer
209 views

XeLaTeX/xdvipdfmx or the driver bug with eps images

It seems that xelatex has problems including eps images; please see the below example; eps image can be download from LaTeX Graphics companion examples on CTAN. \documentclass{article} ...
2
votes
1answer
210 views

MATLAB Plot Alignment in latex

I have two plots in which the x-axis are the same and I'd like to have the y-axis positions to be aligned. As the numbering of the y-axes are different when I print them in MATLAB as two eps files, ...
1
vote
0answers
135 views

Print screen img - png/eps loses quality with no scaling

I am trying to include image to LaTeX, but I loose quality. It is a print-screen with image and little bit of text and it looks awful after the conversion to PDF. I guess that DPI of the image is ...
5
votes
1answer
137 views

How to define a new temporary label, with a separate counter, using chemnum?

Is there a way, using chemnum, to create a different type of TMP-label in .eps files which can then be replaced in the text with a separate label/numbering? For example, I have many chemdraws which ...
3
votes
1answer
78 views

Translate a path in Metapost

Is there a way to draw a path that was defined by relationships between pairs centered around a specific point? I basically want to create a path that I can translate anywhere I want in my image. ...
2
votes
1answer
99 views

Three figures positioned horizontally and vertically

I'm trying to get the following layout for three figures in LaTeX However, thus far I'm not really getting anywhere. What I've found is a way to put them next to each other, but they are too large ...
3
votes
1answer
629 views

Avoiding the floating symbols when exporting (eps + Latex) from Inkscape

I am following the CTAN documentation for exporting an SVG image with LaTeX symbols from Inkscape to embed as an EPS figure in my latex document. MWE is below: \documentclass[]{article} ...
1
vote
2answers
307 views

Error?? texmaker's build-in viewer

I made a eps file from gnuplot. But, texmaker's build-in viewer can't view it correctly.Other viewer works. The problem is that the Greek letters change to a diifferent letter.And some other letter's ...
2
votes
0answers
304 views

XeLaTeX Ghostscript call for EPS to PDF conversion failing

Updated with properly minimalistic example.. I've been wrestling with this for a while now. I had a setup using pdfLaTeX with epstopdf that works nicely, but I need mathspec so I've moved to XeLaTeX. ...
2
votes
0answers
126 views

Umlauts or other special characters in TpX

I'm using TpX to create EPS graphics to be displayed in documents or presentations. At the moment, I'm preparing a presentation in German using the beamer class and include figures via the ...
4
votes
3answers
736 views

What is a good workflow for importing and cropping EPS images?

I would like to be able to import an EPS file in to LaTeX while using some 3rd party image viewer/editor to quickly find crop coordinates. What are some good free tools for this? GIMP (the GNU Image ...
3
votes
0answers
1k views

Problem in MacTeX: package pdftex.def Error: File `./image1-eps-converted-to.pdf' not found [closed]

I have a problem using MacTeX (distribution TeXLive-2013 Intel 64) in Mac OS X 10.9.2, with the IDE TeXstudio 2.7.0. I am trying to include an EPS figure in my document (as I used to do in Windows), ...
4
votes
0answers
122 views

eps import wrong title in graphic \pi looks like \neq

Need to import a figure from Matlab. I export it as an eps and use epstopdf to import it in latex for some unknown reasons the greek pi in the title of the plot that looks ok in the .eps does not ...
1
vote
1answer
26 views

Append .eps to included figures [duplicate]

Is there a way to define a new command so that existing \includegraphics[scale=x]{fig_name} becomes \includegraphics[scale=x]{fig_name.eps} for any x and fig_name? This is for automatic ...
0
votes
0answers
21 views

compile problem of “pdflatex+makeindex+bibtex” [duplicate]

I'm using the Springer latex macro package, but when I compile the tex. file using pdflatex+makeindex+bibtex (Miktex2.9), it always shows an error SVJour3 warning: Missing \journalname ! LaTeX ...
2
votes
0answers
197 views

Having both EPS and PNG in the same document [closed]

I am using style files from this link for Latex in WinEdt 7.0. When including figures, If I use pdflatex or PDFTexify for compiling it doesn't recognize EPS files : ! LaTeX Error: Unknown graphics ...