{eps} is about using files in the Encapsulated PostScript format with TeX.

learn more… | top users | synonyms

2
votes
1answer
136 views

Missing Display Fonts at eps Figure Export from Tikz

This question is similar to the one here. The accepted answer there seems to be working in general, I get a readable .eps-file. If I open it however it looks pixelated and the fonts seem weird. At ...
3
votes
1answer
167 views

eps plot missing axis and legend annotation using TeXShop

I am using TeXShop v3.56 on a MacBook Pro under OX10.8.5. I have generated an .eps plot that I want to include in a paper. When I compile the document, the graph (basically a scatter plot) shows up ...
0
votes
0answers
16 views

Problem with dvipdfm including eps: filtering file via command -->mgs.exe

When installing Windows 10, I've faced the problem translating the dvi with eps graphics. The utility reports like that: filtering file via command -->mgs.exe..... I think I've recognized the place ...
0
votes
3answers
181 views

epspdfconversion error: 'pdftex.def Error: … … .pdf not found'

I am using MikTex 2.9 and TexStudio on Windows 10. 1.I have included in my preamble: \usepackage[outdir=./converted_pdfs/]{epspdfconversion} In Configure TexStudio -> Commands -> PdfLateX, I have: ...
1
vote
0answers
65 views

Error concerning pdftex.def when trying to include an EPS with PdfLaTeX [closed]

I know this is an frequently asked question but the older answers do not help. I want to include an EPS file but I get the error as mentioned in the header. TeX: \documentclass[a4paper, left=1....
4
votes
1answer
362 views

Cannot insert .eps figure into LuaLaTeX compilation [duplicate]

I'm trying to insert a .eps figure into my document. I'm using LuaLaTeX. I have already tried to remove the ".eps" extension from the \includegraphics{} command, but it didn't work. Makes no ...
0
votes
0answers
69 views

Only a blank page after compiling

I am using TeXmaker and I want to include eps images in the document. I compile following this sequence: Latex+dvips+ps2pdf and then show the pdf. I have no errors, however I don't see anything just ...
1
vote
0answers
52 views

Blank PDF file in sharelatex with xelatex

I am working on my thesis and to use a fancy font I am using the xelatex converter in sharelatex, so I can work in my thesis on any computer. The problem is that I would like to add figures from ...
0
votes
0answers
85 views

EPS images are not placed in the correct position when one converts dvi to pdf

I compile a document in latex with WinEdt 5 and MikTeX 2.9. I have already read eps images turned out to be shifted in pdf file So I checked several things: 1.- The bounding box. I used epstool with ...
2
votes
0answers
300 views

Package pdftex.def Error file-pics.pdf not found

I'm using chemnum. Conversion of EPS to PDF failed after a Windows updat: ! Package pdftex.def Error: File `file-pics.pdf' not found.See the pdftex.def package documentation for explanation.Type H &...
1
vote
0answers
111 views

How to reduce file size of eps file when I generate the file from Tikz?

I have read those posts like How to reduce the size of an .eps file? , Eps file is so large [closed] ,Sun life: Linux: how to reduce eps file size? but find little can help my problem. Sun life: ...
0
votes
0answers
46 views

Eps figure is disproportioned in Latex

Often when I insert an EPS figure to Latex its proportions gets messy in the actual PDF. Why so? Working Example: I use miktex, with \usepackage{epstopdf} in the header. This is the include of the ...
4
votes
2answers
78 views

Is it possible to add a white layer below an image? [duplicate]

I am creating a beamer presentation using the beetle color theme (gray background). I am loading eps images that do not have a white background layer and would like to add one. I do not want to edit ...
4
votes
0answers
259 views

eps import wrong title in graphic \pi looks like \neq

I need to import a figure from Matlab. I export it as an .eps. I use epstopdf to import it in LaTeX and for some unknown reasons the greek letter pi in the title of the plot that looks ok in the .eps ...
1
vote
0answers
92 views

epstopdf embed custom fonts

I am using Texmaker in combination with MikTex. To convert eps files, the package epstopdf is used. In my eps files from Matlab I use the font Utopia but during the conversion, it is replaced by ...
1
vote
0answers
19 views

cut eps picture in texshop

I'm working with a MAC and after compiling with XeLatex the eps pictures included in the file appear to be cut on the left. Anyone knows how to solve this ? This is the preamble of the file. \...
0
votes
1answer
76 views

pspicture-eps picture

I am having problems to compile eps picture and pspicture to Pdf simultaneously. I am using Miktex 2.9-winedit32. I tried Latex-dvips-pspdf and it gives me an error. I would like to know if there is ...
0
votes
0answers
20 views

Images other than eps [duplicate]

Using the command \includegraphics I can use only images in eps format. Is there any package or another command in order to include jpg (for example) images? I do not include my usual tex preamble ...
0
votes
0answers
409 views

Eps figures turn out black and white in pdf but not in the pdf viewer

For some reason, the .eps figures I have added to my document appear to be in color in the pdf viewer after compiling, but when I open the generated .pdf only the .eps figures are black and white (the ...
1
vote
0answers
120 views

How to embed fonts in EPS images with PDFLatex of WinEDT

I am using WinEdt version 9.0. I am using following packages among others: \usepackage{epsfig} \usepackage{epstopdf} However, when I run TeX -> PDF -> PDFLaTex the resulting PDF does not embed ...
1
vote
2answers
1k views

.eps files and pdflatex

I am trying to include an .eps figure in a document and build with pdflatex: \documentclass[12pt,a4paper]{report} \usepackage{graphicx} \usepackage{epstopdf} \begin{document} \includegraphics{figure} ...
68
votes
6answers
87k views

Why can't pdflatex print EPS figures?

The images in my paper are in EPS format. If I execute pdflatex to get a PDF version of my paper, the figures won't appear. I have to typeset using the latex command, and then convert the DVI file to ...
1
vote
1answer
82 views

No BoundingBox when using a custom template

It is apparently a well known error to get this when putting a graphic into your document, as can be seen here, here, and here. \begin{figure}[h] \caption{Example of a parametric plot ($\sin (x), \...
0
votes
1answer
227 views

How to scale .eps graph without its texts being resized

How can I use \tikz to resize (scale) .eps-format picture (graph) without text and numbers inside it being resized? PS. I have already been exposed to the same below Qs, but have problem ...
0
votes
0answers
55 views

Problem with pstool creating a figure

I have a problem creating a figure with pstool on ubuntu. I want to process figure created with matlabfrag in pdflatex using pstool. Here is a MWE: \documentclass{article} \usepackage{pstool} \begin{...
2
votes
2answers
26k views

How to insert an EPS picture into a Beamer presentation?

I want to insert this picture : in to a beamer. I know that there some problems if the picture is in the format of PNG or jpeg. So, I convert it into eps format. When I tried to insert it, it failed ...
0
votes
1answer
281 views

eps from Matlab .fig does not show axis and labels in Latex

I would like to make clear from the start that I don't have the matlab script that produced these .fig, so answers concerning Matlab configurations might not give an answer (although accepted as ...
1
vote
1answer
677 views

error “ps2pdf returned exit code 1”

I´m trying to compile a doc with an .eps. I use Winedt 9, and I use LATEX + DVI2PS + PS2PDF All runs well with LATEX compilation, and with DVI2PS, BUT... when I use PS2PDF I obtain this message: "...
1
vote
0answers
135 views

Change label (x-axis, y-axis) font size of already inserted eps figure in LaTeX

Just wondering if there is a possibility of changing the font size of the x-axis and y-axis of an eps figure. I tried \fontsize{15}{12}\selectfont, but it did not work at all. Thank you very much in ...
1
vote
0answers
131 views

dvips broken in texlive-2015

We've recently upgraded from TeX-Live 2012 to TeX-Live 2015. Previously, dvips worked fine, and generated PS files appropriately. Since upgrading to 2015, dvips now creates PS files that have problems ...
1
vote
0answers
28 views

More than 3 included .eps files causes single page to be broken into two pages [duplicate]

I am working in MikTex, trying to put more than 3 .eps drawings onto a page. After the third .eps drawing is added, the next drawing gets pushed onto the next page. Here's my Tex code; I can provide ...
0
votes
0answers
52 views

eps2pgf error: /undefined in currentlinecap

I'm encountering a problem when converting .eps to .pgf with eps2pgf. I'm running OSX Yosemite with Java version 1.8.0_31. This is what I input in Terminal: java -jar eps2pgf.jar figure1.eps -o ...
2
votes
1answer
133 views

Eps file is so large [closed]

I am writing a paper in latex and need to insert .eps figure. I drew the figure in powerpoint, then saved the .ppt as .pdf and opened it in photoshop. I noticed when I opened it, the size was like ...
2
votes
0answers
120 views

including eps file in latex

I have a problem in including eps figures in my paper. Thanks for your help. Here is the code: \documentclass[11pt]{article} \input{amssym} \usepackage[demo]{graphicx} \usepackage{rotating} \...
0
votes
1answer
689 views

How can I maintain the size of epslatex figures after embedding into a LaTeX documnet?

I use the following commands to plot a figure in epslatex. set terminal epslatex size 3.0in,2.25in font ',8' set output 'filename.tex' The epslatex terminal produces two files: filename.tex and ...
66
votes
6answers
15k views

Which graphics formats can be included in documents processed by latex or pdflatex?

There several types of graphics files. In no particular order .jpeg .eps .pdf .png .tif .jif (and no doubt others). Some work with latex, dvips and some work with pdflatex. How am I supposed to know ...
1
vote
1answer
105 views

Error when including .tex file created with XCircuit in Latex mode

I've recently created an eps figure using XCircuit. Labels of the components written in "LaTeX Mode" to have the default LaTeX font. When i try to compile my .tex file i get the following error: (/...
0
votes
1answer
201 views

Subfigure captions of EPS file formats do not align with images in two-column paper

I have trouble getting EPS images aligned work properly in latex. First, my figures were rotated by 90 degrees in the pdf output. So I rotated them by using "angle=90". But I am using a two-column ...
1
vote
1answer
110 views

Cropping an image genereated with latex -> dvips and tikzexternalize

The image is not cropped when building it with latex -> dvips. How could I get the resulting image from dvips cropped? \documentclass{article} \usepackage{pgfplots} \pgfplotsset{compat=newest} \...
1
vote
1answer
164 views

Problem installing OLETeX

I would like to embed OLE objects as pictures into LaTeX documents. The obvious choice is OLETeX. However, I ran into problems installing the OLETeX Color PS L2 printer. The OLETeX software seems ...
2
votes
1answer
490 views

PNG or PDF (or EPS)

Is there a preferred format between PNG, PDF, or EPS for use with pdflatex, particularly in terms of compile speed? If I understand, pdflatex must convert each PNG/EPS file to a PDF file with each ...
1
vote
0answers
82 views

How Remove EPS-preview? [closed]

How to tell if a particular EPS figure has a TIFF preview and how to remove this preview? For some reason the Journal of Mathematical Physics don't want these preview to be there when uploading ...
0
votes
0answers
222 views

Produce .eps figures from .pdf figures in TexShop on MacOSX

I've tried looking everywhere, but I can't find a way to do this. I have a bunch of .pdf figures in my latex document, for example: \begin{figure}[ht!] \centering \includegraphics[scale=0.4]{../...
0
votes
0answers
33 views

Encapsulated PostScript files in TexShop [duplicate]

Error message: LaTeX Error: Unknown graphics extension: .eps" Graphics command: \begin{figure}[t] \includegraphics[ ]{graphics/"new checkers order M 0200.eps"} \end{figure} Unsuccessful ...
0
votes
1answer
266 views

Figures not appearing in preview pane

I am using gummi 0.6.5 and the preview pane does not show eps files Example \documentclass{article} \usepackage[dvips]{graphicx} \begin{document} \begin{figure} \includegraphics[width=1\hsize]{./...
0
votes
1answer
608 views

dvi-ps-pdf-chain not working, while non-dvi chain works

I am using TeX Studio 2.5.2. When I choose the Build & View to be txs:///compile | txs:///view, my document, which contains .eps images and with epstopdf package used, is generated nicely. ...
2
votes
1answer
260 views

Gnuplot with latex and bash

I have created a bash script that accesses and plots data using gnuplot. For this i have had to use the $ variable bash symbol. How can I plot an eps file where i can had a hat or tilde with special ...
2
votes
1answer
1k views

XeLaTeX Ghostscript call for EPS to PDF conversion failing

Updated with properly minimalistic example.. I've been wrestling with this for a while now. I had a setup using pdfLaTeX with epstopdf that works nicely, but I need mathspec so I've moved to XeLaTeX. ...
0
votes
0answers
254 views

problem with showing .eps graph on output .pdf with xelatex?

I am new to xelatex and use TeXstudio 2.9.4 with MiKTeX 2.9 ! I've recently upgraded from pdflatex to xelatex, due to the easy handling of new fonts in xelatex. But the new problem I am facing is ...
0
votes
0answers
267 views

EPS to PDF without font change

I have generated plots using gnuplot with font set to Cambria. The generated plots are in eps format. Now, when I run pdflatex, it automatically converts the eps files to pdf files and incorporates ...