2
votes
2answers
69 views

Equation in Table Too Large

I have a table where one of the formulas is simply too long. Is there a way to break up an equation in Latex in a table? It's already rotated and I tried p{5cm} but it simply overlaps the text as it ...
1
vote
0answers
54 views

Numering equations within tabular

My first post here so please bear with me! I am looking to submit a paper to a SIAM Journal, which requires me to use their template. I have my manuscript complete, but when copied/pasted into the ...
2
votes
1answer
75 views

Equation + explanation below

I have to write an explanation to my equation, and I would like to do it, below the equation. But, I do not know how to do that. It should look like this: My preamble look like this: ...
0
votes
1answer
529 views

Equation with \argmin inside table

I want the equation to properly show the argmin tag with variable at the bottom inside a table. In my case it is showing as a subscript. I tried everything but cant get this done. The following is a ...
5
votes
1answer
79 views

Labeling Multiple Equations Per Row of a Table

I am trying to create a table with two columns of independently labelled equations (1-6). Unfortunately, everything I have found so far either has not worked or would number them as sub-equations (1a, ...
1
vote
1answer
109 views

Why is $ required around \oplus in a math environment?

I wrote the following: \begin{equation*} \begin{tabular}{c|c|c} P & Q & P \oplus Q \\ \hline \text{T} & \text{T} & \text{F} \\ \text{T} & \text{F} & \text{T} \\ \text{F} & ...
3
votes
0answers
62 views

Eqnarray vs align environments [duplicate]

I keep reading that \begin{align} is preferred to \begin{eqnarray}. Unfortunately, I can't get align to justify rcl. I'll change between align and eqnarray, and the rightmost column is right ...
4
votes
2answers
186 views

How to refer to figures, tables, equations and sections [closed]

What is the correct way to refer to figures, tables, equations and sections? For example, should I write In Figure 1.1 we notice that.... or In fig. 1.1 we notice that.... or In figure 1.1 we notice ...
4
votes
2answers
80 views

Series of long equations formated into a table with references

I have a series of long equations, 12 of them, that I'm trying to format into a table. The table is something like: \begin{tabular}{L{1.7cm} | L{1.8cm} | C{12.2cm} R{1cm}} \toprule \textbf{Label 1} ...
5
votes
3answers
168 views

Equations in a box - table doesn't work

I want to put some limit equations in a table but all I get are errors such as "! Missing $ inserted." and "! You can't use `\eqno' in math mode.". Am I doing something wrong or is there another way ...
5
votes
2answers
98 views

How to create a math environment with one row on one side, and two on the other?

I have the following math equations: \begin{align*} &\mathcal{H} = \mathcal{H}^{(0)} + \mathcal{H}^{(1)} \\ &\mathcal{H}^{(0)} = -\frac{\hbar^2}{2m}(\nabla_{1}^{2} + \nabla_{2}^{2}) - ...
2
votes
0answers
89 views

Errors using dmath for multiline equation breaking in a table with booktabs package?

I would appreciate if you can help me find a solution/way out to the following problem. I am using the booktabs package to get a nice looking table. I have a long equation in the table which I ...
3
votes
2answers
105 views

Two equations in a block of table

I make a table, 2*2, \begin{center} \begin{table}[H] \centering \begin{tabular}{|c|c|} \hline $F=ax$ & \nabla F =a $ \\ \hline $G=a+b\\ K=a+c$ & $ H=c+d$ \end{tabular} \end{table} ...
1
vote
1answer
194 views

Two columns of equations, aligned and just one number per column

I'm writing a two-column document, and I want to display two sets of large equations floating at the top. Each equation set should be aligned within the same column, and only the two top equations ...
3
votes
1answer
219 views

Automatic arrangement of equations with comments

This question led to a new package: conteq I am writing a paper with multiple chains of equations or inequalities, with optional explanations. Depending on the size of the equations, I use one ...
14
votes
3answers
1k views

How can I illustrate decimal to binary conversion?

As part of my homework for discrete math I need to convert different decimal values, both positive and negative, to 8-bit binary representations using signed magnitude, 1's complement, and 2's ...
13
votes
2answers
2k views

Align Equations Over Multiple Tabular Rows

I'm trying to set up a table with some equations in it, however I would like the equations on multiple rows to be aligned properly. So far I have \begin{tabular}{cc} \hline \multicolumn{1}{l}{Header ...
6
votes
1answer
565 views

Size of equations in tables

I'm trying to insert multiple equations in a tabular environment in LaTeX. My problem is simple yet I haven't found any particular solution to it: the equations displayed are too small, and I'd like ...
9
votes
2answers
244 views

How to put a list and an equation side by side

I'd like to get a list and an equation side by side so that I fill the page width better for aesthetic reasons, I've tried the following but doesn't compile: \begin{tabular}{cc} Known values: ...
2
votes
2answers
4k views

How to put a formula into a table cell

I need to insert into a table cell a formula that requires the summation sign and I apparently do something wrong and the compiler just throws me back errors and I really don't know how to solve this. ...
9
votes
1answer
564 views

Several \begin{equation} \end{equation} in columns

I have 3 elements of the following form (approx ~20 equations for each one) : \begin{equation} \begin{aligned} % LOTS OF EQUATIONS % \end{aligned} \end{equation} How to put display these 3 elements ...
2
votes
1answer
2k views

Numbering equations in tabular environment

I wish to number equations in a table, like numbering them in \begin{equation}. ... \end{equation} Since all the equations are written as "inline" equations (for example, $a = b+c$) in ...
4
votes
1answer
599 views

Math environments in tables with > and < preamble

I'm trying to put a \begin{align*} and \end{align*} for every entry at columns 2 and 3 of my table. But I'm getting errors that seem to say my environment markers are mismatched. I'm sure I've got my ...
22
votes
1answer
306 views

Does \\ in the last line of an array have any effect?

Consider the following example: \begin{array}{l} line 1 \\ line 2 \\ \end{array} Is the \\ in the last line completely optional or are there circumstances under which it has any effect?
2
votes
3answers
9k views

how to insert multi line equation in the tabular environment?

How can insert multi line equation in the tabular environment? For example see the following code that can show my request. \begin{tabular}{rrr} &a &b\\ &u=\begin{cases} 0;& ...
2
votes
1answer
267 views

Increasing spacing between the rows of a table containing both equations and words

Below is some code I am working with. \begin{tabular}{l|m{4.75in}} Equation 1 & $y^{10} + x^{6} + 7x^{3} + 6y^{11}$\\\hline Equation 2 & $\begin{alignedat}{1}(n + 1)^{2}u_{n + 3} &+ ...
2
votes
1answer
108 views

How to continue a piece of text so it is aligned with the last line of an inline multiline box?

Is there a way to have the continuation of a piece of text aligned with the last line of a multiline environment, such as array? For example, I would like to define the command ...
1
vote
1answer
145 views

Hanging Indents in Tables for Equations

I currently have the following code \begin{center} \begin{tabular}{l|p{5in}} Differential Equation & $(1273628x^{4} + 1237129387x^{3} + 12831729x^{2})f'''(x) + (9x^{3} + 12392183012938120x^{2} ...
2
votes
1answer
775 views

Aligning equations by row and column — with vertical lines

I want to include two sets of equations side-by-side in a table. Here is my example: \documentclass{article} \usepackage{amsmath} \newcommand{\eqnbox}[2]{ ...
5
votes
1answer
1k views

Embedding large equation in tabular

When I put an equation in a tabular, it gets vertically compressed. How do I prevent that?