1
vote
1answer
59 views

pdf_tex file not found

I'm trying to include an image (edited in Inkscape) in my document. However, everytime I run the file , it says "File not found". In Inkscape i have saved the document as .pdf and used the latex ...
3
votes
2answers
78 views

\begin{document} ended by \end{figure}

I have this error when I try to insert a figure, even if I insert just the \begin{figure} \end{figure} with nothing inside. What might be happening? I use the following packages: ...
1
vote
0answers
45 views

TeXstudio error

I'm using TeXstudio IDE. I'm currently facing a problem in the first page of presentation. The IDE throws an error saying the image is not found. The code as follows: \title{\textbf{Design, ...
0
votes
0answers
29 views

inserted graphics appears out of the page!

This is my code: \begin{figure} \begin{center} \includegraphics[scale=1]{C:/Users/Prathmesh/Desktop/research papers/runoff water harvesting/LaTex/waterpan.png} \caption{SILT TRAP} \end{center} ...
0
votes
0answers
42 views

How does one get a psbarcode in a letter's title?

Here is what I'm working with thus far: \documentclass{letter} \newcommand*{\BottomLeftX}{1.0in+\hoffset+\oddsidemargin}% ...
1
vote
0answers
62 views

Error with pdf image and texstudio

I'm writing a .tex file with texstudio. In the tex there are some pdf figures. When i compile it the pdf viewer of texstudio shows me this: . while if i open the compiled pdf with another program, i ...
0
votes
0answers
62 views

no Bounding Box

Using TexMaker I am compiling with PDFLaTex the following and I get the error: ! LaTeX Error: Cannot determine size of graphic in Figures/chl.png (no Bounding Box). \documentclass[draft,grl]{AGUTeX} ...
0
votes
0answers
56 views

Problem to show image. Error Bounding Box

I'm trying to add some images, but When i compile it, an error is shown, and in the PDF the images are not showed. Code I have used: \begin{figure}[!h] % h-here, t-top, b-bottom \begin{center} ...
1
vote
0answers
61 views

Inserting simple figures in a document

I am simply trying to insert some figures in my tex document. I know this is very basic, I also have been following a latex guide, searching for question on stackexchange and asked around. I wrote ...
5
votes
0answers
221 views

Characters missing when embedding PDF with pdftex

I have the feeling this must have been asked before, but I couldn't find it with search... When I run the following test file \documentclass{article} \usepackage[T1]{fontenc} % ...
3
votes
1answer
81 views

Errors when trying to insert graphics file [duplicate]

I want to include a graphics called quadratic.pdf in my LaTeX document, which only contains the image show below. While compiling, I get the following errors: Line 1: Fatal Error No output file ...
5
votes
1answer
210 views

includegraphics error when scaling image

I have been using Latex for years now, and consider myself fairly fluent, but this error has me stumped. I am using Miktex 2.9 in Windows 7, and am encountering an error in something that up until now ...
0
votes
0answers
367 views

What is the cause of the error “Package keyval Error: orientation undefined”

When I try to compile the following code on Windows using MikTeX and TexWorks, I get the error "Package keyval Error: orientation undefined". I understand that it is referring to line 69, which ...
1
vote
0answers
89 views

How to Insert a Figure Properly? [closed]

I'm trying to insert a figure in my report, I get an error each time when I try this: \begin{figure}[H] \hfill{}\includegraphics[width=15cm,height=16cm,bb = 0 0 200 100, draft, ...
3
votes
3answers
98 views

Centering two images but aligning them left

How would I place two images below each other so that their left sides are aligned and the whole construction is centered? I tried like this: ...
2
votes
1answer
80 views

! LaTeX Error: File `\unskip ' not found

I appear to be having a problem with embedding images in a tabular enviroment. I getting the following error: ! LaTeX Error: File `\unskip ' not found. and here is the offending piece of code. The ...
2
votes
1answer
159 views

Trouble using an image in a Beamer presentation

I'm trying to include an image in my Beamer presentation, but I keep getting this error: !pdfTeX error: /usr/local/texlive/bin/i386-linux/pdflatex (file ./markov.jpeg): reading JPEG image failed ...
2
votes
0answers
33 views

Importing A pdf Image [duplicate]

I have an image saved as a pdf file, and I would like to include this image in one of my latex documents. In the preamble of m document, I included \usepackage{pdfpages}; and here is the formatting I ...
4
votes
2answers
111 views

Can someone explain how to fix this error when trying to add a picture?

I am trying to add a picture using: \begin{figure}[!h!t] \centering \includegraphics[width=90mm]{Hollywood and Beverly Hills} \caption{Hollywood and Beverly Hills} \label{fig: ...
1
vote
0answers
706 views

Latex Error: Cannot determine the size of graphic no bounding box [duplicate]

\includegraphics[width=1in]{space.jpg} This shows an error: Latex Error: Cannot determine the size of graphic no bounding box I am new to LaTeX, I learned and installed it in an hour. I need to ...
0
votes
0answers
59 views

Problems with images in lyx [duplicate]

I have been writing a chapter of my thesis using Lyx. Everything was normal until I put the last image in the project. When I am trying to generate the DVI file I got this error message: LaTeX Error: ...
5
votes
1answer
8k views

! LaTeX Error: Not in outer par mode

I am using an image within minipage and getting error message. ! LaTeX Error: Not in outer par mode. Below is minimal working example. \documentclass[11pt,table,a4paper]{article} ...
2
votes
1answer
238 views

Gnuplottex fails with 'undefined control sequence' when choosing different font size [duplicate]

I encounter a very strange problem when using gnuplottex on my Win 7 32 bit system with MiKTeX 2.9 - gnuplot 4.6.3 & the latest gnuplottex release: \documentclass[dvips]{minimal} ...
11
votes
3answers
3k views

Unknown graphics extension: .1.png

I have a file called xxxx_0.1.png, and want to import it as an image in my document. I am using graphicx with the following command: \includegraphics[width=0.5\textwidth]{images/xxxx_0.1.png} and ...
0
votes
0answers
32 views

Unknown graphics extension: .eps with epstopdf [duplicate]

Well, this is just an explanation about how I solved this problem. I was trying to include an EPS file. 1) First of all you need the epstopdf package. There are a lot of discussion about that, but ...
0
votes
0answers
34 views

error of Cannot determine size of graphic [duplicate]

I compile my LaTeX code as LaTeX ,it give an error Error: LaTeX Error: Cannot determine size of graphic in scope.jpg (no BoundingBox). If I compile as PdfLateX not errors...i need my output as a ...
5
votes
2answers
7k views

Error including a .png: Cannot determine size of graphic

I have a little problem: I am not able to put an image in my document. This is how I start: \documentclass[a4paper,12pt,titlepage]{report} \usepackage{fontenc} \usepackage[italian]{babel} ...
1
vote
1answer
114 views

Error presenting an image [closed]

I want the third page of my document to include an image (JPEG) but I can't figure out what's wrong with my code. Here's the MWE: \documentclass{beamer} \usetheme{Warsaw} \title[Artificial Neural ...
3
votes
2answers
155 views

image { } problem

\def \mic {\unit{\micro\meter}} \begin{figure}[h] \includegraphics[scale=0.8]{C:/Users/21_12_test10} \caption[6 nozzles working in parallel at 40V with 20~\mic drop spacing.]{6 nozzles working in ...
2
votes
0answers
3k views

How to insert pdf (as a graphic file) in LaTeX [closed]

I am trying to insert some ready image-pdf files to my LaTeX code. (I use pdfLaTeX and my distributor is TeXnicCenter.) But I will get this error: Package pdftex.def Error: File 'fig1.pdf' not ...
2
votes
2answers
6k views

Why doesn't LaTeX allow me to import my .eps file when I compile it?

Everything works perfectly except until the error below. I'm slightly new at LaTeX and perhaps I'm missing a package, but I already have the graphicx package. Any help will be greatly appreciated! ! ...
0
votes
2answers
112 views

Why is the picture not inserted?

When I pdflatex the text below it doesn't insert the picture, but writes the name of the file instead (pic). And the geometry line gives the error ! LaTeX Error: Missing \begin{document}. The ...
2
votes
1answer
214 views

Undefined control sequence when using \setupinteraction and \externalfigure

When I use \externalfigure after \setupinteraction[state=start], I get an error message about an Undefined control sequence. Here is a minimal working example (filename prob.tex): \starttext ...
3
votes
1answer
4k views

Problem with using scale while using \includegraphics [duplicate]

Possible Duplicate: \usepackage[turkish]{babel} and \includegraphics inconcistency I previously imported many figures to TEX files and simply use the corresponding parameters without any ...
6
votes
2answers
5k views

Dimension too large on a PNG figure under xelatex and beamer

I have PNG image I want to introduce into my presentation. The figure is black and white and the edges are small. When I compile the file in pdflatex everything is fine but when I Compile it with ...
1
vote
1answer
547 views

Image has invalid character? Trouble with graphicx

I'm sort of stumped on this one. I'm trying to include some graphics that I created with Stata in a document. I'm using pdfLaTeX and graphicx. When I try to compile, I get the error message: ...
5
votes
2answers
437 views

Problem to include EPS file with file name containing “#”

I have problem including EPS in LaTeX document. I am using latex->dvips->ps2pdf workflow to compile LaTeX document file. Error is thrown as Illegal parameter number in definition The EPS file ...
7
votes
1answer
8k views

Problem inserting figure to LaTeX file using Texlipse

I'm trying to insert a figure into my LaTeX file using the following syntax: \begin{figure} \centering \includegraphics [width=3in]{fig1.png} \caption{Calculation of shortest path betweenness} ...
2
votes
1answer
3k views

MiKTeX 2.9 doesn't find the includegraphics package

I am using MiKTeX 2.9 and when I include the package{Includegraphics} to use graphics, doesn't recognize. So I need help.
6
votes
2answers
5k views

I encountered an 'errorUnknown graphics extension: .eps.'

I tried to load an .eps picture, but an error occured, 'errorUnknown graphics extension: .eps.'. Please help me!
0
votes
0answers
391 views

How can I fix this problem: “Cannot determine size of graphic” [duplicate]

Possible Duplicate: MikTex error for PNG images when trying to produce DVI I have the following line in my tex file: \includegraphics[width=1.0\textwidth]{pic.png} There is no error ...
34
votes
1answer
79k views

Cannot determine size of graphic

I'm trying to include graphics in my Latex-file, which I compiled with latex+dvipdf on OS X. Latex however returns this error: "Cannot determine size of graphic" My graphic is exported from ...
3
votes
3answers
3k views

Problem with AUCTeX, graphicx, pdfTeX and \pdfoutput not equaling 1

I've been using Emacs + AUCTeX for several years now, and all of a sudden I started getting the follow error on all documents that have compiled fine before: ERROR: Package pdftex.def Error: PDF mode ...
4
votes
1answer
1k views

PDF inclusion: found PDF version <1.5>, but at most version <1. 4> allowed

How do I get rid of this error: PDF inclusion: found PDF version <1.5>, but at most version <1. 4> allowed I tried putting \pdfoptionpdfminorversion=5 after my preamble, but nothing ...
5
votes
3answers
6k views

MikTex error for PNG images when trying to produce DVI

I have a tex file with \includegraphic elements for some PNG images. I use MikTeX on Windows and the PDF is fine. Now, I need a DVI so I tried using: \pdfoutput=0 This creates a DVI, but only after I ...