2
votes
1answer
45 views

How do I insert the section name into the header?

I'm trying to use fancyhdr to put the current section name into my header, but the below code just returns a blank header. I can display the current page number without a problem. ...
5
votes
2answers
49 views

How to clear footer for the last page?

In the preamble of an exam I am creating, I currently have: %headers, footers \usepackage{fancyhdr} \pagestyle{fancyplain} %header \fancyhf{} % sets both header and footer to nothing ...
0
votes
0answers
20 views

Header appearing in second page of TOC, when it shouldn't

I have recently made some changes to my document, using the geometry package to change its margins. But after I've done this, the fancy header I'm using started to appear in the second page of the ...
5
votes
2answers
74 views

How to hide header only in first page of each section with fancyhdr?

I want the header to be empty in the page were section begins and showed in the other pages. How can I do that? \documentclass[12pt, titlepage, onecolumn, a4paper]{article} \usepackage{lipsum} %% ...
1
vote
1answer
22 views

fancyhdr does not display chapter name

I am using the fancyhdr package to create the headers and footers in my document. I wanted to display the chapter name on the left side of the page, so I defined my header like this: ...
4
votes
1answer
50 views

How to move the page number to the bottom of the page for a single page

I am making a book with the fancyhdr package. I have some headers that put page numbers on the top corners of the pages. On pages that are started by \chapter, LaTeX moves the line number down to the ...
5
votes
1answer
37 views

Missing footer problem

I am trying to format my document with different header and footer for first page. I have done it successfully for the first page but the footer of the second page is not visible. I think the margins ...
0
votes
0answers
17 views

page number first page of chapter on right side [duplicate]

I'm writing my thesis. I'm using this pagestyle: fancy But page number in first page of chapter appears in the middle of page. I want to move to right side. Can I change it ?
1
vote
1answer
36 views

Using titlesec to have \chaptertitle and \sectiontitle in twosided report

I would like to customize the headers of my report. These should contain chaptertitle and sectiontitle. From here: Header not displaying correctly on chapter page due to subsection I have made an ...
1
vote
2answers
32 views

How do I format the header text of the table of contents?

I'm new here, I have tried to solve most of the problems with my TEX code and so far I have been successful in solving all of them except for this one. I would like to show the word "CONTENTS" in the ...
1
vote
2answers
59 views

Problems with header and footer in documentclass book

I tried to use a header and footer layout I found here on this website. But I have some problems with changing the code to what I want. I want the pagenumbering to be like page x of y in the footer. ...
1
vote
1answer
60 views

fancy header on bibliography first page

I have used a different first page for all my chapters in my thesis which are defined using: \titlespacing*{\chapter}{0cm}{3cm}{0.5cm} ...
2
votes
1answer
41 views

LaTex: Page numbers between hyphens

How do I get page numbers to appear like: - 1 - I followed http://tex.stackexchange.com/questions/40114/format-page-numbers but it just added an annoying header at the top of the page: ...
4
votes
3answers
46 views

How to center \rhead

I currently have my header as follows \pagestyle{fancy} \setlength{\headheight}{39pt} \renewcommand{\headrulewidth}{0pt} \lhead{\includegraphics[width=.1\textwidth]{Logo}} % Frist page only header ...
1
vote
1answer
101 views

Fancyhdr, chaptermark and table of contents

I'm using fancyhdr for editing the header of my document. I have the following code: \documentclass[a4paper,12pt,oneside,titlepage]{book} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} ...
8
votes
2answers
107 views

Tcolorbox in footer with nobeforeafter adds space to other elements in footer

EDIT: \documentclass[10pt]{article} \usepackage{geometry} \usepackage[skins]{tcolorbox} \usepackage{fancyhdr} \renewcommand{\footrule}{\hbox to\headwidth{\color{blue}\leaders\hrule height ...
5
votes
1answer
33 views

Subsection only in even header

Starting from the following code: \documentclass{book} \usepackage{lipsum} \usepackage{fancyhdr} \fancypagestyle{standardstyle}{% \fancyhf{} \fancyhead[RO]{\large\raisebox{.1cm}{\leftmark}} ...
1
vote
1answer
59 views

How to add full width header? [duplicate]

I'd like to add a header containing of a picture (aligned left with text), multirow text and a picture (aligned right with the text). I found fancyhdr which has an inacceptably compilcated ...
1
vote
1answer
89 views

How do you use Psvectorian?

Can someone provide a short explanation or example of using psvectorian? http://melusine.eu.org/syracuse/pstricks/vectorian/psvectorian.pdf Specifically, I am looking for an explanation of how to ...
2
votes
1answer
81 views

Fancyhdr, problem with chapter titles

I've asked my first question on the forum yesterday and I've done several mistakes in it, making the subject not understandable so I've decided to delete the question and start again properly.... I'm ...
0
votes
0answers
24 views

pagestyle{fancy} will cause second page to have different alignment [duplicate]

In the below image I copied the second and third page above one another. As you can see the alignment is incorrect. After the third page (including the third page) everything works fine. I am using ...
4
votes
3answers
104 views

Chapter name in header of page

I'm looking to get chapter names in the header of my document. I am using the article class, and the code below is an example of how each chapter/section begins. \noindent {\huge \textbf {Chapter 1}} ...
5
votes
1answer
121 views

I am at sea with the \markboth \leftmark \rightmark and so on ! Is there a simple explanation?

My problem follows from my difficulties with the english explanations on the marks, from the readmes of fancyhd or titleps, in order to modify the headers. I do not understand the business behind the ...
3
votes
3answers
199 views

Fancyhdr - Is it possible to have a small table inside header?

Ok, I'm trying to create this type of formatting for each of my pages: Now, I want to have this on every single page, in the header on the right hand side. I currently have the following: ...
3
votes
2answers
118 views

Formatting headers in the book class

I am using the book class for my thesis. In every page that is not the beginning of a chapter, LaTeX writes the number and name of the chapter in the header. Is there any simple (emphasis on the ...
0
votes
1answer
54 views

How to show a long chapter name in the footer with two lines?

A short time ago, I asked this question to resize the width of a chapter section. But there is another problem with the footer. If the chapter name is too long, the chapter name in the footer ends in ...
5
votes
1answer
84 views

Is there way to make horizontal line on the top of the page that contains only a page number

I tried to write a book of the following style: Is there a way to modify the upper horizontal line such that it does not have the word "Sisältö" or any other text except page numbers? ...
3
votes
1answer
52 views

How can I use adjustbox in \sectionmark?

I want to use adjustbox in \sectionmark but it doesn't work. Is there a work-around for this? \documentclass{book} \usepackage{blindtext} \usepackage{adjustbox} \usepackage{fancyhdr} ...
5
votes
1answer
102 views

Only show header if section number > 0

The current section name + chapter.section number is shown in the header. This is normal behaviour (what I want). Example: How can I remove the header text, if there is no section on the page. The ...
8
votes
1answer
238 views

Distance between top edge of paper and header

EDIT : Please apologize me. I forget to add two lines to MWE I think very essential to handle the problems. Please re-check the MWE. There is parameter defining distance between bottom edge of top ...
3
votes
1answer
96 views

fancyhdr: missing section number of bibliography

I know there are other questions like this, but I didn't find an answer for my particular question. Please consider the MWE below. While the section number is included in the header for the first ...
2
votes
2answers
310 views

Including section titles in fancyhf headers

I would like to include the section name of the page's displayed section in my header tags in the fancyhdr package, something like \fancyhf[HR]{SECTION NAME} \fancyhf[HL]{SUBSECTION NAME} How can I ...
6
votes
2answers
141 views

Automatically remove ruler when no header is present

This is a question triggered by Automatically remove page number in one-page documents. When activating the fancyhdr package, it is necessary to clear the headers, which I do below with \fancyhf{}, ...
4
votes
1answer
59 views

Image in header, custom padding

First of all, sorry about the poor title, but I searched for ten minutes and couldn't find a better one.. I'm using fancyhdr to set some custom headers and footer in my LaTeX document. I'd like to ...
3
votes
1answer
88 views

Removing header underline and margins from a single page

I'm using the book class and fancyhdr in TexMaker and I want to use a rotated table which will eventually take up one whole page. The largest problem is the header line as my table will overlap with ...
3
votes
2answers
207 views

Using fancyhdr in titlepage using Report Class

In the report class I am having trouble getting the header to show up on the title page. From what I understand, the \maketitle command automatically sets the pagestyle to empty. I had tried ...
6
votes
3answers
241 views

Using the fancyhdr package, how do I have a footer but no header on the first page only

I would like to have a header and a footer throughout the document, however on the first page I would like no header with the footer remaining as it is throughout the document. So far all I can do is ...
1
vote
0answers
28 views

How can I typeset the current subsection in the page header? [duplicate]

How do you set the name of the subsection in the header? I've managed to put the chapter and section in the header/footer, by using the fancyhdr package. More specifically, I used, in \rhead, ...
6
votes
1answer
214 views

Fancyhdr adding multiline header causes footer margin to be inconsistent?

I have been searching to fix this problem for a while now. When I use the fancyhdr package to create headers and footers, and I run my code, as long as the header does not take up multiple lines, the ...
2
votes
2answers
117 views

Illegal unit of measure (pt inserted) \end{document} [closed]

By looking at questions with same title as mine, I unfortunately don't find answers to fix my code. I am not too familiar with LaTex, but after reading several webpages I really can't see what I am ...
4
votes
1answer
773 views

Fancyhdr and scrreprt

I try to use scrreprt and fancyhdr for getting the chapter at the head of even pages left and the section at odd pages right: \documentclass[12pt,a4paper,twosides]{scrreprt} \usepackage{fancyhdr} ...
5
votes
2answers
110 views

Problems double-sided document header

I'm having troubles setting the header of a two-sided document. I need only the chapter number (not necessarily) and name in the header at left for even pages and at right for odd pages; I don't want ...
2
votes
1answer
101 views

Fancyhdr - the header image collides with the body of the content

I am really confused. In the original document , I had a header that collides with the body of the document. Now for preparing the MWE , I removed the unnecessary packages and code segments. I found ...
4
votes
1answer
93 views

Fancyhdr messes up with \backmatter

I just found out that if fancyhdr has to mention a chapter located in \backmatter, it does this by numbering it with the number of the last chapter. For instance, this: \documentclass[11pt, a4paper, ...
5
votes
2answers
83 views

How to remove the horizontal line below the image in the header

To add image in the header , I have written the code, basically the pagestyle modification. Now , just for a trial , I first modified only my plain page style. After the image gets inserted in the ...
1
vote
1answer
124 views

page header logo overlapping page header text

I am using the following LaTeX source to place a logo into page header: \pagestyle{fancy} \chead{\includegraphics[width=1.5cm,keepaspectratio]{./docs/log4cplus}} \setlength{\headheight}{47.0pt} ...
6
votes
1answer
151 views

fancyhdr page decorations and page numbering

Hello there are several examples of decorative pages. Most examples work with a single page,when numbering is not necessary. When i try to make for every page. It does not work, or i have problems ...
2
votes
3answers
101 views

How to reposition or remove middle pagination labels?

Right now, I am using the following fancy headers as required by my school's department policy. However, when I look at the footer, it has a number for each page in the middle of my footer label. I ...
0
votes
0answers
41 views

Why do I have to set the pagestyle to fancy before setting it to something else? [duplicate]

I have a minimal example here that creates lowercase headings. \documentclass[12pt, a4paper, oneside, onecolumn]{book} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} ...
2
votes
1answer
361 views

scrartcl and fancyhdr on first page

In relation to this question, I'd like to get a fancy header just on the first page of my scrartcl document (height about 150 pts), but even using \thispagestyle{myfancyhdr} all the following pages ...