{floa­trow} is a pack­age that cus­tomizes lay­outs of {floats} (both the float body and its {captions}).

learn more… | top users | synonyms

3
votes
1answer
282 views

Subfloatrow: Omitted incrementation in figure numbering when using subfigures

I suspect this question is slighty related to another question found in subfloatrow: incorrect continued numbering. Trying out the MWE below, the incrementation of the figure number of figure two is ...
3
votes
1answer
386 views

Sync listings caption numbers and add all to List of Listings

I want to create a list of all listings. Listings itself allows to add captions and list them in a list using \lstlistoflistings, but they can not float. If I set up such a floating environment using ...
3
votes
1answer
226 views

Vertical space between caption and main text

I am trying to adjust the vertical space between my captions and the main body of text below it. It is likely to be packages interfering with each other, but I am not sure which. Herbert suggested ...
3
votes
1answer
229 views

Apply floatrow style to align and glossary

I use the booktabs package and the floatrow package with the float style ruled. For consistency I would like to apply this look (example) to the glossary I use as nomenclature and an amsmath ...
3
votes
1answer
353 views

subfloatrow and tabularx, wrong numbering of figure

I wanted to "group" a figure and a table to get one figure. It has been proposed to use floatrow for this, with the possibility to remove the subcaptions later on (subfloatrow of package floatrow does ...
3
votes
0answers
74 views

Strange problem with additional space when figure floats away

I am using fontspec, floatrow and subfig together. When a figure floats away an additional space is inserted at the place where the figure is in the text. In cases in which the line before the figure ...
3
votes
1answer
70 views

How do I make hyperref show the entire figure when I'm using both caption and floatrow?

I use the caption package in my document to control the appearance of captions on figures and tables (small text, with bold labels): \usepackage[font=small, labelfont=bf]{caption} I use hyperref to ...
3
votes
0answers
146 views

External PDF from pgfplots contains several pages when with floatrow

Plotting with pgfplots and the external library creates the single PDFs for every plot as wanted. But every of those PDFs contains several pages, each showing the same plot. Sometimes there are three ...
3
votes
0answers
106 views

floatrow - remove whitespace beneath figure

I have a page layout with exactly 40 text lines and some small pictures to distribute throughout the text. When I arrange 2 pictures at the page bottom in a row via floatrow and specify their height ...
3
votes
0answers
403 views

The [H] “put it here” placement option doesn't work with floatrow [closed]

I'm using the minted, floatrow, caption, and listing packages to create code blocks like these: To do this, I'm using a hack based on this answer. Here is what I have: ... \usepackage{listings} ...
2
votes
2answers
1k views

subfigures using subfloatrow, overpic, tikz to add rows to annotate imported images/figures

I did my diligent search for a combination of subfloatrow, overpic, and adding arrows for annotation of imported images using tikz, but couldn't find one. These kind of images are typically found in ...
2
votes
1answer
534 views

Fix overfull hbox floatrow

When using the floatrow package to layout figures with the caption to the side, I get a overfull \hbox errors. Overfull \hbox (3.33331pt too wide) in paragraph at lines 23--23 If I set \FBwidth-1 ...
2
votes
1answer
837 views

Force caption to go above/below with biblatex

I have used the following to force captions above (tables) and below (figures) as per the answer to this question. \documentclass{memoir} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} ...
2
votes
1answer
77 views

Floatrow package is affected in figure environment

I am using floatrow package creating the box environment. if i declare the floatrow package in the tex file the normal figure framebox is affected. MWE \documentclass[twocolumn]{article} ...
2
votes
1answer
70 views

Background color around paperwidth figure

The question could have been subtitled: "how to force a caption to appear always on top of object float". I have a complex set of configurations and commands which I could resume to that MWE. % !TeX ...
2
votes
1answer
224 views

Set fixed font size in floating tables with floatrow package

The floatrow package allows global changes to the font size in floating tables with commands such as font = small (cf. section 3.1.2 of the documentation). But such settings only change the relative ...
2
votes
2answers
617 views

How to print graphics on a new line in floatrow/subfloatrow

How can I skip to a newline in a subfloatrow environment (floatrow package) after two graphics. I want to typeset two graphics A.pdf and B.pdf on the same line, C.pdf and D.pdf should be on a new ...
2
votes
1answer
50 views

How to prevent reordering float appearance?

Latex changes the order of floats in my document. It moves figure 2 before figure 1. Figure 1 occupies a whole page, therefore I set it to be inserted on a float page, in afterpage environment. How to ...
2
votes
2answers
146 views

Using floatrow or \FBWidth to prevent captions from wrapping around

I have two tables side by side like so: \documentclass[11pt,reqno]{amsart} \usepackage[utf8]{inputenc} \usepackage{lipsum} \usepackage{amssymb} \usepackage{color} \usepackage{enumerate} ...
2
votes
1answer
102 views

How can I track down a bad spacing issue?

I use a rather complex class, built on top of extarticle with twocolumn option. It loads a lot of packages. One of them is floatrow. Sometimes, I get a very annoying error that can be seen in the ...
2
votes
1answer
444 views

Labeling and referencing subfigures

I am trying to use the floatrow package to place to figures side by side in a subfloatrow, while this works fine I have problems following the sugested labeling method from the manual. On page 73, of ...
2
votes
2answers
251 views

Align three images vertically at the top, using the tallest height with floatrow

I am using the following LaTeX, to try to get 3 images aligned at the top \documentclass[a4paper,11pt]{article} \usepackage[utf8]{inputenc} \usepackage[top=2cm, bottom=1.8cm, left=3cm, ...
2
votes
1answer
659 views

Allow floatfoot to left-align beneath figure, but extend past right

I can set my \caption and my \floatfoot as separate widths, using the following example, based on the answer to my previous question: Different width for caption and floatfoot with floatrow ...
2
votes
1answer
494 views

sidesubfloats… why does this errored code work and my “correct” code doesnt?

I use the following code to get a 3 x 3 figures with automated labels that range from a-i. As you can see there is an error in the code, I use sufloatrow instead of 'subfloatrow' a few times. ...
2
votes
1answer
43 views

How can I get correct labelling of sub-figures with subfig and floatrow?

I am using subfig and floatrow to manage sub-figures. Without floatrow, everything works OK, but I need floatrow to easily align the captions, as the subfig manual explains. Adapting the example on ...
2
votes
2answers
162 views

How to insert a main caption beside subfigures?

I have 3 subfigures that I insert at width=0.5\textwidth, which leaves some empty space. I would like to insert the main caption in this space. How can I do this? I am using subcaption package for ...
2
votes
1answer
208 views

float row figure box - two lines in caption

I am trying to get the caption on two lines with this command but using \\ does not work. If anyone know how to do this it would be helpful \begin{figure} \begin{floatrow} \ffigbox{% ...
2
votes
1answer
488 views

floatrow package, subfigures and cross referencing

I think the question has not been posted already. Here is my problem : I wanted several subfigures within one. I used "subcaption" package at first, as it's the newest. But it appeared that it's not ...
2
votes
1answer
256 views

Horizontal margincaption alignment using floatrow

I want to switch from sidecap to floatrow in putting figure captions in the margin. When using sidecapthe text is perfectly positoned within the margin. When i use floatrow there is a slight shift. ...
2
votes
1answer
49 views

\floatfoot and equations

I am using \floatfoot to creates notes for a figure in a paper. I would like to include an equation in the notes for this figure. Specifically, I am trying to use the following code: ...
2
votes
0answers
124 views

Smash table footnotes of floatrow

I am using the smashcaption redefinition for small images and tables with their caption situated in the margin. It smashes the caption but not additional footnotes. Furthermore, since the caption is ...
1
vote
1answer
4k views

Caption labelfont in uppercase, what am I doing wrong?

I'm trying to get the subcaptions and captions in sanserif font and Uppercased. According the manual of the caption package this should be possible in the following way.However, this doesnt seem to ...
1
vote
2answers
148 views

How to have image span two columns without a page break

I'm making a document with two columns; however, I'd like the first page to server as a cover page with a title spanning two columns and a cover image doing the same. I tried to do it as follows, ...
1
vote
2answers
262 views

about \usepackage{graphicx,floatrow} in latex

When I use the code: \usepackage{graphicx,floatrow}, the caption of a table ends up under the table. This does not meet the requirement of Springer (book publisher).
1
vote
2answers
171 views

Adjust link target for rotated two part figure

I want to place two pictures side by side as subfigures, rotated 90 degrees and those two pictuers filling a whole page. While this works from the looks I have some issues, with the hyperref package ...
1
vote
2answers
152 views

Formatting subfloatrow captions as Figure 1.A etc

I have been looking all over the place for a solution to this problem but I can't seem to find one. Basically I want subfigures captioned as "Figure 1.A", "Figure 1.B" etcetera. I use floatrow's ...
1
vote
1answer
112 views

Rotate figure and caption with floatrow

I have a problem with my LaTeX code: I want two things: Besides "normal" figures with the figure in the middle and the caption below, I want some pictures be rotated (because of their size) to ...
1
vote
1answer
125 views

Subref with floatrow (without subcaption)

I have subfigures created with the floatrow package instead of the subcaption package. The latter is not loaded. \begin{figure}[htbp] \ffigbox[\FBwidth] {\begin{subfloatrow}[2] ...
1
vote
2answers
42 views

horizontal adjustment of side caption after tikz arrow addition

I have a figure with side caption and I added an arrow to the image but now everything is not centered anymore since I added the arrow, is there a way to force the centering to accommodate the added ...
1
vote
1answer
365 views

Figure and subfigure long caption wrap

\FBwidth declaration seems to work for subfigures and for parent figures only if subfigures are placed in the same row. With subfigures in separate rows, \FBwidth for figure caption does not measure ...
1
vote
1answer
289 views

floatrow + caption = odd behaviour + wrong figure numbers

Looking for means to control vertical alignment in subfigures, I decided to use floatrow package, but later found it behavior quite strange. The issue is with figure captions, which may disappear or ...
1
vote
1answer
286 views

caption for listings in margin

The floatrow package enables one to put in the margin captions for figures and tables, but it seems there is missing the possibility of doing the same for the lstlisting environment from listings ...
1
vote
0answers
94 views

dpfloat affects table caption spacing with floatrow

I am trying to format two full-page tables such that they appear side-by-side on consecutive pages in a double-sided report. Typically this is easy to achieve using dpfloat however, I have found ...
1
vote
1answer
87 views

Change font of single floatrow object

I'm using floatrow and want to change the the font of a single float object. It says here that this should be possible by placing \fleatsetup{} inside the float object. This doesn't work for me. My ...
1
vote
0answers
206 views

floatfoot with ffigbox gives warning

I use a (I believe correct setup) of floatrow, to generate multiple subfigures, which uses \ffigbox and I would like to use \floatfoot to generate a longer text below the caption for the group of ...
0
votes
2answers
129 views

Side-by-side images in LaTeX

I need to put 2 figures side by side in LaTeX where the first figure needs to be given a caption and the second must not be given a caption. I have tried the following: \usepackage{floatrow} ...
0
votes
2answers
46 views

Vertical subfigures with captions on left

This is what I want I've tried a million things from floatrow package, subfloat, sidecap, etc. but nothing seems to work. This shouldn't be that hard to achieve I feel like but I'm all out of ...
0
votes
1answer
34 views

Two figures side by side - caption

I have two figures side by side in my work and I need to add captions to them. However when I add captions they are not in line with the figures. Is anyone able to help me? Thank you very much. This ...
0
votes
1answer
242 views

Margincaption (floatrow) in outer margin (twoside)

I'm using Want figure height to ignore side caption height to place a caption into the outer margin. Unfortunately, i can get it only to work with left pages. On right pages i can't muster bringing ...
0
votes
1answer
297 views

How to place the caption of a lstlisting in the margin? (scrreprt, floatrow)

In the following mwe I am using the floatrow package to place the figure captions in the margin. How can I do the same for listings? Update: Some listings are spread over two pages. ...