{floa­trow} is a pack­age that cus­tomizes lay­outs of {floats} (both the float body and its {captions}).

learn more… | top users | synonyms

16
votes
2answers
25k views

How to remove figure label?

I'm using floatrow package to organise my figures, but then would like to add an image in the preliminary chapters which should NOT contain figure label e.g. Figure 1, but only the caption To my ...
16
votes
3answers
349 views

┓- shaped figure and caption

I have a (float) figure that has a ┓-shape, that is there is a huge blank square at the bottom left. I'd like to put in this blank the caption of the figure. Is there a way? My class loads ...
14
votes
2answers
5k views

How to build and combine sophisticated layouts in figures

How can I get a layout like the one below in my document?                 With this question, I am looking for: An ...
13
votes
1answer
9k views

Table captions are always placed below

I have a problem with table captions in LaTeX. They appear always below the tables instead of above as required by my editor. I've read lots of documentation and everybody says that if you place the ...
13
votes
1answer
530 views

Spacing, subfigures and right captions (Creating a bar menu)

I am trying to create a bar menu for a student place I am part of. Now since we are studying CS, mathematics and or physics of course he have to use latex to create our barmenus or drinking lists. An ...
8
votes
2answers
1k views

Vertically fit a figure with caption to page

I have a very large(heightwise) figure and would like to fit it on a page with its caption, that I place below (document wide style which I would like to keep, and the figure fills the line anyhow, so ...
8
votes
1answer
1k views

How to solve the issue between side-by-side floats (tables) and floatrow package?

I came from here where this issue was raised but could not find a straightforward solution. I have now side-by-side tables and I want to avoid the errors thrown once floatrow package is added to the ...
7
votes
1answer
572 views

Caption positioned at the side of the figure

I would like to have the caption of the Figure on the side of the figure. Plus I want to control caption width. Also, caption and Figure should be aligned all the way to the left and right of the ...
7
votes
1answer
2k views

How to layout four figures with floatrow, two of them vertically?

how can I get a layout like the one below in my document? _____________ _____________ _______________ |Big Picture1| |Big Picture2| |Small Picture1| | | | | |______________| | ...
7
votes
1answer
388 views

afterpage clashes with restoregeometry from the geometry package

I'm writing my thesis and have used the geometry package to control the size of the text body so that it follows 'good' typesetting practices as described in the KOMA-script documentation. Many of ...
6
votes
1answer
677 views

Incorrect figure numbering when using subfloats in a subfloatrow

I have a document with a lot of subfigures which are different heights and need to be placed side-by-side and centered vertically. It seems like the floatrow package is ideal for this. After much ...
6
votes
1answer
894 views

floatrow with subfloatrow and fcapside: adjust placement of captions

I want put two subcaptions using fcapside into one float. The captions should be placed near the respective figures and the two figures should be separated nicely. I tried the following code: ...
6
votes
1answer
128 views

Problem with “floatrow” package in yathesis

I am using yathesis to edit my thesis. In the main file of the template, the package "floatrow" is added automatically. I use Mac OS X 10.10. Before today, the MacTex version is 2014. and my work is ...
6
votes
1answer
153 views

Using a floatrow environment outside a figure environment

I use the floatrow package to manage my figures. Sometimes one cannot put figures inside a figure environment (e.g. inside a mdframed environment). Hopefully, the \ffigbox macro works outside the ...
6
votes
1answer
1k views

Alignment of Margin caption with floatrow and caption

I want my captions in marginpar to be left aligned. I am using raggedright option in caption package along with floatrow package. The captions are left aligned only for long captions. MWE ...
6
votes
2answers
1k views

subfloatrow of package floatrow does not work without subcaptions

I have two pictures that I want to place as subparts using the floatrow package. The following example works if I add subcaptions to the parts, but does not if I leave them out. I do not want any ...
6
votes
1answer
410 views

longtable and floatrow: font commands ignored

If I load both longtable (ltxtable) and floatrow, then \sffamily is ignored and the table is typeset in roman. If I disable floatrow everything works as expected. floatrows \RawFloats command does ...
5
votes
2answers
5k views

Table and Figure side-by-side with Table caption above, Figure caption below

A continuation of this question. I'm fighting a page-limit in a single-column layout and I need to put a Figure and a Table side-by-side and provide them with independent captions. However, the style ...
5
votes
1answer
2k views

Different width for caption and floatfoot with floatrow

I am using the floatrow package. I would like to define a separate width for both the caption above and the \floatfoot below the floats. I want the caption to span the entire width of the page, but ...
5
votes
1answer
2k views

Can't get this caption right (wrapfig + floatrow)

I'm trying to get a caption to span the figure width on a wrapfig environment. But for some reasons it just won't go. Here is my code and a graphical representation: ...
5
votes
1answer
2k views

floatrow: Changing the formatting of table footnotes

The floatrow package, which is useful for customizing the layout of floats, also allows to add footnotes as well as additional explanations (besides the caption) to tables. (The main commands are ...
5
votes
2answers
3k views

place footnote under table above caption

I would like to place a footnote under a table and above the caption. Since I am using the floatrow package I went with \floatfoot, however there is no option to position floatfoot below the table and ...
5
votes
1answer
60 views

hyperref link jumps beneath table's top caption when floatrow is included

I use the following packages related to captioning, tables and hyperlinks: \usepackage{hyperref,caption} \usepackage[style=Plaintop]{floatrow} \usepackage[referable]{threeparttablex} I have a table ...
5
votes
1answer
139 views

TikZ externalization with floatrow package

When using the TikZ externalization library within a \ffigbox from the floatrow package, the external image is created two times. The reason is, that the argument of \ffigbox gets parsed two times. ...
4
votes
3answers
186 views

How to arrange a table and figure side by side with all captions on one side

To maximize space, I'm trying to put an table and image side-by-side in a document. As the image is longer than the table, I want to put both captions under the table (if possible). I envisage this ...
4
votes
1answer
197 views

Too wide subfigures

I try to place to figures side by side, as can be seen below the resulting figures are to wide, they expand over the right document border. Do I have to take the gap into account when sizing the ...
4
votes
2answers
232 views

Automatic scaling of tikz images in floatrow

I have multiple images in a row (using floatrow) and would like to scale them, that they fill the row, while their top and bottom edges are flush to each other, and the aspect ratio of the images them ...
4
votes
1answer
123 views

Problem using tikz with a caption and floatrow together

I have this MWE drawing a caption over an image but when I load the floatrow package, the caption will be drawn under the image. When I only write a text over the image it works. ...
4
votes
1answer
330 views

subfloatrow: incorrect continued numbering

I am using the subfloatrow environment (provided by the floatrow package) to organise the layout of figures for my thesis. For the MWE provided below, the numbering of the sub-figures in the second ...
4
votes
1answer
776 views

How to set figure - caption spacing individually in a floatrow environment?

In the preamble I use : \usepackage[labelformat=empty]{caption} \usepackage[heightadjust=all,floatrowsep=none,captionskip=3pt]{floatrow} With this package I'm able to put two figures horizontally ...
4
votes
1answer
196 views

Captions in sub floats using subfloatrow are too narrow

I have a figure that has several subfigures, each with its own caption. I am aligning the subfloats using subfloatrow. How do I make the captions expand at least to the width of the graphic? Currently ...
4
votes
1answer
1k views

How to manipulate width and position of items inside floatrow

From this answer by @lockstep I learned, how to put figure and table side by side: \documentclass{article} \usepackage{floatrow} % Table float box with bottom caption, box width adjusted to content ...
4
votes
1answer
260 views

floatrow and dirtree clash

I am using dirtree to visualize a directory structure. It needs to be embedded into a float as to avoid problems when a pagebreak occours. This works fine except when loading floatrow which i use to ...
4
votes
1answer
266 views

Floatrow package causing missing algorithm lines

Hi I started using floatrow and noticed that it is breaking functionality of my algorithm code, both the algorithm header and footer have disappeared. Here is a picture of before and after: Here ...
4
votes
1answer
177 views

float and caption margin mayhem

I cannot get my caption left justified correctly for wide floats. I have facing pages, and after many experiments, the closest I've come to success is a proper layout only for odd pages. I would like ...
4
votes
1answer
975 views

Center subfigure using floatrow

I'm working with caption and subcaption to style my (sub)figure captions and especially with floatrow to center my figures. However, this does not work for subfigures, as the following nMWE (nearly ...
4
votes
0answers
40 views

caption vertical spacing broken

I'm trying to migrate my project from float package to floatrow one (we can't load former with the latter as it is said in documentation for floatrow). I extensively used ruled style. Most obvious ...
4
votes
0answers
35 views

What does \flrow@restyle do?

For a long time, I had an issue when using the floatrow package together with the twocolumn option of the article class. I did solve the problem by trial and error but I'd like to understand what I ...
3
votes
1answer
3k views

Vertical alignment with floatrow

I am playing with floatrow, however the images are not aligned at the top and I do not know what I am doing wrong. \begin{figure}[H] \begin{floatrow} \floatbox{figure}[0.4\textwidth][\FBheight][t] ...
3
votes
3answers
3k views

Figure next to list (caption problems)

I am trying to put a figure next to a list, where the list is talking about the figure. This is fine, I can do that with the minipage environment. However, my problem is that when I try to put a ...
3
votes
2answers
265 views

local options for floatrow

I am using floatrow and have a global setup with \floatsetup. However I have one subfloatrow in my document which requires different settings. How do I locally adjust the \floatsetup/options for one ...
3
votes
2answers
804 views

Framed floats and background colors for captions

i wanted to edit my floats. Found the package floatrow and got the desired frames easily for them. Now i would like to add a backgroundcolor to the captions. The problem is that the \parbox, i ...
3
votes
1answer
1k views

Captions at right/left side in beamer

I want to place captions at right/left side of pictures in a beamer presentation. However, the following code does not work due to incompatibilities between beamer and floatrow. ...
3
votes
1answer
3k views

How to put table caption on top without using float or floatrow package

I have got some very simple table; something of the sort: \begin{table} \centering \begin{tabular}{|c|c|c|} \hline 1 & 2 \\ \hline 3 & 4 \\ \hline \end{tabular} \caption{This is ...
3
votes
1answer
427 views

floatrow destroys common solution for parallel figures

I really like the floatrow package, but when its code is not required I expect that everything works as normal, however the correct code fails to compile once floatrow is loaded. What I am talking ...
3
votes
1answer
82 views

hypcap not working with floatrow

I'm trying to get hyperlinks for figures work properly. I mean clicking on a link should take me to the figure (not the caption). It doesn't seem to be working with floats in floatrow. No matter where ...
3
votes
1answer
114 views

Setting width of RawCaption

I have posted a question Different width for caption and floatfoot with floatrow (which contains a MWE) regarding setting caption and \floatfoot width in the floatrow package, which was answered so ...
3
votes
1answer
298 views

Horizontal spacing between subfloats using floatrow and subfig (with fr-subfig support)

I am trying to arrange two rows of sub-figures using subfig and floatrow. The captions are aligned as I wish and the vertical alignment of the objects is also fine. However, I cannot figure out how to ...
3
votes
1answer
512 views

fitting side by side figures with floatrow

I'm trying to fit two figures side by side (with the same size) in the width of the text, using the floatrow package. I use the showframe option and the \fbox in mwe for better visualization. how to ...
3
votes
2answers
474 views

Customize the captions of tables

I'm a little disperse between packages caption, floatrow, I'd customize the captions of my tables, but at the same time, I would like the figures captions to remain unchanged. How can I left align ...