0
votes
1answer
41 views

How to put a figure in one column and its caption in another column in a two column article latex

Could some one help me to figure this issue out? I have a two column article and I have figures that are long. They fit in one column and that's ok but if I want to add the caption under the figure, ...
4
votes
1answer
59 views

How to set a picture with caption in table?

How to set caption for images in table? like this image.
1
vote
1answer
38 views

How to make caption of a subfigure wider after scaling the figure?

i wanna scale (a) similar to (c) unfortunatelly, the caption is scaled too how can i make the caption of (c) wider (similar to caption of (a))? thank you \documentclass[12pt]{article} ...
2
votes
1answer
38 views

Journal of Fluid Mechanics Class Constraints

I am trying to format a paper to be consistent with the JFM style guidelines. I am using the JFM Latex class provided on the website. However, this class appears to be forcing a format that is not ...
6
votes
2answers
76 views

Different Caption-Setup for top and bottom figures?

is there a way to control the caption format used for figures, depending on where the figure has been placed? In particular, i would like to have different formatting of figure captions for figures ...
1
vote
0answers
32 views

Caption with two figures in a single column

How can I put two figures in a single column, with a label (say a), b) ) on the left and in the middle or top of each figure? I was trying \newcommand{\Inserttwopgf}[6]{% \begin{figure}[t] ...
3
votes
1answer
60 views

Math w/italics in normal context, roman when in italic context (ie, caption)

I have not found this question asked previously. I am fine with math using italics for variables when the math appears in a normal context. But our figure captions are in italics, and when math is ...
1
vote
1answer
40 views

Adding a caption to graphics in parshape

This question is the continuation of the one posted here. How can I add a caption to the figures as shown below?
2
votes
3answers
59 views

Avoiding non-centered caption on ctable with float

I try to put my floats under the control of KOMA-Script using \restylefloat and KOMA's komaabove and komabelow. This works, but gives undesired side effects with ctable. The tables are centered but ...
1
vote
1answer
34 views

Resize characters in figure caption

I frequently use \scalebox from the graphics package in math-environment as $x^{ \scalebox{0.55}{(n)} }_{i}$ which works fine. However, I am not able to use the same sequence in a figure caption: ...
3
votes
1answer
33 views

Let caption float into margin

I searched for a long time to find a solution to let a caption of a figure and/or a table expand into the outside margin. I'm able to get a figure/table where the width is textwidth plus ...
0
votes
0answers
24 views

Customizing Multiline captions

I would like to have a caption which is centered and has multiple lines. For example, \documentclass{article} \begin{document} \begin{figure} \centering \begin{tabular}{cc} \rule{5cm}{3cm} & ...
2
votes
2answers
41 views

Centering figure caption does not work

I have a few narrow figures for which I want to center the caption. I have to use a LaTeX template from Springer (svmult.cls). This makes captions left-aligned by default. I took a look at this ...
4
votes
1answer
52 views

Adjusting the caption of an algorithm2e code

I'd like to typeset the caption of an algorithm environment such that it is bold, fills the available width of the paper, and neither the caption nor the line numbers encroach into the margins. In ...
3
votes
1answer
37 views

Change figure caption name in “thesis” document

Does anyone have an idea why this approach to changing figure naming doesn't work in thesis type document? I'm using babel and all other captions translate normally, except "Figure", which stays at ...
1
vote
0answers
38 views

Place figure captions below figure instead of in side margin?

I'm trying to figure out how to use the Tufte-book layout but place image captions below the image instead of in the side-margin. Does anyone know how to do this? This is for a dissertation and the ...
2
votes
1answer
98 views

Vertical space between caption and main text

I am trying to adjust the vertical space between my captions and the main body of text below it. It is likely to be packages interfering with each other, but I am not sure which. Herbert suggested ...
1
vote
0answers
49 views

Figure source caption problem - strange space between text and url

Following Add source to figure caption I created new command called \captionsource: \newcommand*{\captionsource}[1]{% \caption*{% Source: \url{#1} }% } As you can see on the ...
3
votes
1answer
54 views

Chemscheme numbering of schemes

I am very new to latex and I am trying to use the chemscheme package to help with my compound numbering (which seems to be working ok so far) but I am having trouble with the actual scheme numbering ...
0
votes
1answer
66 views

Tabularx, Caption and Footnotes

I need to have some tables with the following requirements: The need to be of width \textwidth; The caption has to be on top of the table even at automatic page breaks; The tables should not float; ...
2
votes
1answer
48 views

Non break space between figure and caption for figure float h

I'm currently creating a two columned article. My document class is given by: \documentclass[10pt, aps, prb, twocolumn]{revtex4-1} In my article I would like to include figures. The way I do this ...
3
votes
1answer
37 views

How to reference figures by the order their reference appears in the text rather than the order the figure appears in the text

I have a two page document with three figures, A and B is small and C is big. Therefore in this document I have my text all on one page and then on the second page my three figures. To make best use ...
4
votes
1answer
52 views

How to insert a page break between a figure and its caption?

Is it possible to insert a page break or put the figure caption on the following page. The figure is too big for both the figure and caption to fit on a single page. \begin{figure} \centering ...
1
vote
2answers
69 views

Two figures with side captions next to one another

I currently have the following figure placed at the bottom of my page: \begin{SCfigure}[][h] \centering \caption{Georg Kantor (1845--1918)} ...
1
vote
1answer
29 views

include figure, auto-fit image and add caption at same time

I have to include some images to illustrate a problem. So I used the following code to auto-scale them to text-witdh, which works amazing. But how can I add some caption? (I have to label and number ...
3
votes
2answers
98 views

An .eps image, whose caption is too separated from the image.

I am writing a thesis in a large .tex file in Vim. I have an .eps image, whose caption is too separated from the image. I have extensively read similar posts, tried almost everything, but the ...
1
vote
0answers
40 views

Hyperref and custom caption in float environment link wrong

I have a custom caption style. If i add a reference to a float the link points to the caption which is below the floats content, but it should point to the top. I probably forgot to set a ref line or ...
1
vote
0answers
66 views

How to suppress hyphenation in figure and table captions?

To suppress hyphenation in section names I use \hyphenpenalty=10000 in \titleformat command. Is there any similar way to suppress hyphenation in figure and table (and longtable) captions?
1
vote
1answer
41 views

How can I align two captions? [duplicate]

I have a figure and an equation side by side. The code is as follows: \begin{figure}[H] \begin{subfigure}{.5\textwidth} \centering \includegraphics[width=.8\linewidth]{cycle} \caption{The opsin ...
2
votes
1answer
63 views

Prefix “Figure” and giving reference to figures

Is it possible to adjust the font size of the prefix Figure when captioning an included image? Furthermore, is it possible to refer to a picture in a meaningful way without using a caption; I tried ...
2
votes
1answer
41 views

Redefine table caption

I'm writing a paper in IEEEtran twocolumn format. When putting pictures in my paper I prefer to use the Table environment over the Figure environment. I feel that the Table environment does a better ...
1
vote
0answers
21 views

Which macros define spaces around table and float environments? [duplicate]

I am trying to define the length of vertical space between tables and text globally in my document. So far, I have been using \setlength{\intextsep}{0cm} \setlength{\floatsep}{0cm} ...
1
vote
1answer
29 views

How to direct all sub-captions of the subfigures in a central caption

Is there a way to direct all the \caption{}'s found within multiple nested subfigure environments within a central \begin{figure} environment given as \begin{figure} ... ...
4
votes
1answer
76 views

How to make the subtitle (a or b) of an image position correctly?

I want the following subtitles (a or b) to be shown correctly not like the current view as shown in the following image: Also how can I add more spacing between the two images? \begin{figure*}[htp] ...
4
votes
1answer
31 views

Figure caption within quote environment

In order to provide visual contrast, I have decided that I would like to have a certain section of a document I'm writing indented. To achieve this, I've simply been using the quote environment ...
6
votes
1answer
104 views

How to show figure captions in Arabic language?

I want to show the caption of the figure in Arabic language. Given the unpredictable interactions with other packages, I tended to keep them in the preamble of the MWE. Questions How to set the ...
2
votes
1answer
27 views

How to chang the colon after figure number to another symbol?

I want to change the colon in the caption to another symbol e.g. Figure 1: this is figure to Figure 1 | this is figure How can I do this?
2
votes
2answers
70 views

How can I remove an empty caption line

I'm generating LaTex automagically from a lengthy document that is written in the multimarkdown language, compiled by a software package called Scrivener. It's a workflow that works well, but this is ...
1
vote
0answers
19 views

Why is space inserted at beginning of table or figure caption when using macros to define caption label? [duplicate]

Here is my MWE. As you can see, the problem only happens when we use the macro \suppOrApp. \documentclass{article} \usepackage[english]{babel} \usepackage{blindtext} \usepackage{caption} ...
2
votes
1answer
23 views

List of <newfloat> with zero caption in text

new Float type: Illustration How to make a list of illustrations, with captions in the list, but for the illustrations to appear in the text with zero captioning - image only.
4
votes
1answer
118 views

figurename (captionname) changing

I have a problem with my algorithms, I'm using the mcode-package: I would like the caption to say Algorithmus 1.1 for example. If I try it with a figure environment it does not work, because I don't ...
2
votes
1answer
59 views

Multiple images and proper side-caption positioning

I would like to put three images on one page (as one figure). First two of them stretched over 100% of textwidth and the third one over 50 % with the caption beside the third picture (to spare space). ...
2
votes
2answers
207 views

Table caption not appearing in PNAS document class

I am unable to get table captions to show up when using the PNAStwo document class from 2008 (the latest version includes printer marks that I do not want). The documentation says "Figure and table ...
2
votes
1answer
90 views

float row figure box - two lines in caption

I am trying to get the caption on two lines with this command but using \\ does not work. If anyone know how to do this it would be helpful \begin{figure} \begin{floatrow} \ffigbox{% ...
2
votes
3answers
55 views

Detect misplaced label in figure

I realized that I sometimes write : \begin{figure} ... \label{fig:foo} \caption{Bla} \end{figure} instead of: \begin{figure} ... \caption{Bla} \label{fig:foo} \end{figure} ...
1
vote
0answers
28 views

How change “Figure #” position in lyx [duplicate]

I'm using Lyx, and adding a floating image always add a "Figure X" at the left of the image, I'd like to show this 'caption' (I don't know if is caption or not) under the image, how should I do? What ...
5
votes
3answers
103 views

Image Caption Alignment

I have two images of different heights and widths sat next to eachother on the page, and I'd like their captions to align. As it is currently, one caption is displaced vertically from the other. My ...
0
votes
0answers
81 views

! LaTeX Error: \caption outside float. Yes in one document, No in another

I have the following LaTeX code in a document. \begin{centering} \caption{Patient Contacting Materials} \label{tab:materials} \begin{tabulary}{\textwidth}{LLL} \toprule Feature & Manufacturer ...
1
vote
1answer
61 views

How to customize the chapter in front of figure page in listoffigures?

I am using the the packages \usepackage{url} \usepackage{graphicx} \usepackage{rotating} \usepackage[hypcap]{caption} \usepackage{hyperref} to include referencable graphics in my work. The ...
3
votes
2answers
110 views

Change numbering system for margin figures in tufte-handout document class

I'm using the tufte-handout document class to provide margin comments on a third-party text for teaching purposes. I therefore want to preserve the numbering of the main text figures (figure and ...