0
votes
0answers
14 views

Latex figure, default option [h]? [duplicate]

It seems that the figures in my document are positioned at the top of the page by default. Is it possible to change that default behaviour to [h]? (without adding [h] to all the figures) Thanks in ...
2
votes
1answer
49 views

Keep float out of a environment (for example definitions)

I knew that floats float around and sometimes are placed far away from where one wants them to be. With the times I learned to work with it, and there are already many posts about it. I have a kind ...
1
vote
1answer
62 views

How to put a float *right here* if possible, or at the top of the next page if it is not possible?

Using the float package, I can use the H specifier and position a float exactly where I want it. For example, \documentclass{article} \usepackage{lipsum} \usepackage{float} ...
2
votes
0answers
47 views

Absolute positioning of an image without overlaying the text

The following will position an image at the specified page coordinates. \documentclass{article} \usepackage{lipsum} \usepackage[demo]{graphicx} \usepackage[absolute,overlay]{textpos} ...
1
vote
1answer
61 views

references to floats without ever using figure numbers (possbily using lua or python)

Stephen Wolfram's 'A New Kind of Science' states in its colophon that it has 973 illustrations spread out over 1280 pages. Remarkably, he accomplishes this without ever using figure numbers. No figure ...
0
votes
0answers
25 views

2 images described in two sections , but they appears in same section [duplicate]

I have two images . One of them is to be shown in section 4.1 and another is to shown in section 4.2 . For this purpose , I have the following code . \section{Linear Algebra} A hyper-plane ...
6
votes
4answers
93 views

Vertically center two side by side figures, leaving captions on the same line

I would like to place two independent figures (no subfigures) besides each other. Each figure should have its own caption. This approach uses two minipages inside a figure environment and is nearly ...
4
votes
1answer
34 views

Figure position at bottom, when there is already one on top

I am working on a LaTeX paper, using RevTex 4.1 and the package graphicx and compiling with pdfTeX 3.1415926-2.5-1.40.14 (TeX Live 2013). When I include figures in my document, they will ...
5
votes
2answers
63 views

Figure placed on a separate page is centered and not on top

I have multiple figures placed in my document (all of which are using [htbp], [ht] etc. and are placed correctly). The last figure receives a separate page (which is alright) but it's centered on this ...
2
votes
1answer
39 views

Figure positioning correction

I am finding incredibly tough to align a one particular figure in my report. Somehow this figure gets automatically positioned in the extreme right position.Here is my code for the same. Could anyone ...
1
vote
0answers
99 views

Two-columns wide figure at the bottom of a page with Revtex

The problem is simple: how to place a two-columns wide figure at the bottom of a page with the revtex document class? For those unfamiliar with revtex, it is a two-column style guide used by a number ...
1
vote
2answers
56 views

Two figures with side captions next to one another

I currently have the following figure placed at the bottom of my page: \begin{SCfigure}[][h] \centering \caption{Georg Kantor (1845--1918)} ...
2
votes
0answers
28 views

Placement of figures at the end of document [closed]

I want to place all the figures at the end of the document in nature.cls can some one help me in this renewenvironmentfigureletcaptionnatfigcaption newcommandnatfigcaption2 atenddocument ...
2
votes
0answers
39 views

Tables and Figures towards the end

I'm submitting a manuscript and the editing team asked for the following two changes: 2) Please remove the figures from the main text file as they are already uploaded separately in the Figures ...
0
votes
0answers
18 views

Figures won't stay where they should using LaTex

I'm using TeXnic Center, but I'm having an issue with getting my figures where I want them. I've used [h!] etc but when I write something else it will put it before and partially after my figures, ...
2
votes
1answer
54 views

How to make a non-float subfigure environment? [duplicate]

I am writing a document class report that has a maximum page limit. I tend to stay away from float environments for tables and figures since I like to have them where I code them in (I try [h], and ...
2
votes
1answer
152 views

Floating figures and tikzposter

I'm trying to use the class tikzposter to write a scientific poster. I need to link the figures to my text, therefore I need to use \caption and \label commands. It seems impossible to use floating ...
3
votes
2answers
77 views

How to set the default float position, e.g., set it to be H? [duplicate]

Is there a way to set the default position option for floats? I want all float to by default to use the option H. Then I only need to set position parameter for those floats that I do not want to use ...
2
votes
0answers
73 views

mdframed box spanning over page break: prevent images in between

I've run into a problem in a bigger documents where pictures get in between the breaks of mdframed boxes. So the scenario is that the mdframed box should break at pageend if it's to large and not ...
0
votes
0answers
52 views

Figure placement in XeLaTex

I am attempting to place a figure in my report. I have switched to XeLaTex but the figure doesn't seem centre and is overlapping the text. I have tried countless things but no luck. I've attached a ...
9
votes
1answer
189 views

What are the default placement options for a floating figure in Latex?

The document Using Imported Graphics in L A TEX and pdfL A TEX talks about the different ways to affect where a floating figure is placed [htbp]. But these arguments are optional ... So how is the ...
8
votes
4answers
214 views

Floats in the middle of paragraphs

How would you place a float like this with LaTeX? Note that it's in the middle of a sentence. Normal float placement rules could only find the right page to put the float on. Then it's a matter of ...
0
votes
0answers
27 views

Table won't stay anchored in two colums article [duplicate]

I'm trying to put a table placed in the two columns of an article. This I can do. The problem is it won't stay in the middle of the text. Here is my code, \documentclass[11pt, twocolumn]{article} ...
5
votes
2answers
96 views

How to place a multicolumn table above a multicolumn figure?

I have a table that spans two columns of a page. I have a figure that also spans two columns. I tried adjusting the h, t and the * in different fashions, but I couldn't get it to work. The figure ...
0
votes
1answer
93 views

Framed float box, spanning two columns in paracol

I'm looking for a simple, framed, float box-environment that has (or can have by construction) a star equivalent (like figure* or table*) so that it may span both columns in the paracol environment. ...
4
votes
3answers
68 views

Floats Analogue of framed

I have very little experience with LaTeX. So, pardon my ignorance, but is there a float equivalent of \framebox? Ideally, I'd like a simple construct for framed text that I can position at the top ...
2
votes
3answers
108 views

how to put odd number subfigures in multiple rows

There are five figures. Basically, I'd like them to displayed as following: |figure 1|figure 2| |figure 3|figure 4|figure 5| The first two figures are in the first row and the last three are ...
1
vote
0answers
62 views

placing the figure at bottom of the page

I want to place the column-spanned figure at the bottom of the page near to the text but using \begin{figure*}[b] goes the figure to the end of the document!! Why? \begin{figure*}[b] \centering ...
3
votes
2answers
58 views

Fixing the location of the appearance in algorithmicx environment

I'm trying to force an algorithm to stay between two paragraphs, but after compilation, it shows up in the next page. My algorithm takes more than half a page and is something like: ...
0
votes
1answer
39 views

Table desturbingly floats into align environment functions

this is my code \begin{align} S(\Theta)&=\ln\left|\nu(\Theta)\right|\label{eq:S_theta}\\ \intertext{where $\nu(\Theta)$ is the determinant of the covariance matrix of the responses, which are ...
5
votes
1answer
1k views

How to tell LaTeX to place all figures at the end of pdf file?

Well, I search through the SE site but it seems everyone else was asking how to avoid appending figure and their accidents are not quite an elegant solution to my problem --- I'm looking for a way ...
3
votes
1answer
48 views

Preventing floats of being before section

I have a rather large file with many chapters, before every chapter I use \cleardoublepage to get to a new doublepage but flushing all floats beforehand. In the beginning I also had position ...
11
votes
2answers
200 views

Typeset credits at the very end of a document automatically

I want to print some graphics on the very last page of a document (containing some credits etc.). I don't know the length of the final document since it serves as a template and therefore I need a ...
3
votes
0answers
203 views

Figures misplaced in recent version of MiKTeX

After a MiKTeX update, eps graphs were misplaced and appeared overlap with captions and text in pdf files. They worked perfect in earlier MiKTeX 2.9. Figures in dvi files worked fine as desired. ...
12
votes
1answer
145 views

Drawbacks of the `H` specifier

According to the float package documentation, the H float placement specifier [...]when added to a float, tells LaTeX to “put the float HERE, period”. If there isn’t enough space left on the ...
0
votes
0answers
22 views

Aligning pictures for thesis/ report [duplicate]

At the moment, I am writing the thesis and I am leaving the figures to position themselves freely without forcing it with here 'h' option in \begin{figure}. This leaves the figure/plots prioritized to ...
0
votes
0answers
188 views

How to place a figure in Latex while the [htbp] doesnt work?

I insert a figure in to my document using code like below, right after 2 tables in a page. \begin{figure}[htbp] \centering \includegraphics[with=350mm, bb=0 0 1350 743]{path/to/figure.png} ...
2
votes
1answer
74 views

subfigure placement incorrect with 4 figures

I am having an issue with latex placing my figures incorrectly. I have 4 related plots that I want to appear together as a single figure (with a,b,c,d sub-references). \begin{center} ...
0
votes
0answers
29 views

Image appears before paragraph [duplicate]

A part of my document looks like this: \paragraph{blah} \begin{figure}[ht!] \centering \includegraphics[width=4.5in]{3a.jpg} \caption{(a)} \end{figure} \begin{figure}[ht!] \centering ...
0
votes
0answers
26 views

Cannot get my figure placed at the right spot [duplicate]

Although I use the option [H] or small case analogue of it [h], my figure is placed separately from the text how can I solve this issue? I tried to provide a minimal working example but this may not ...
4
votes
1answer
84 views

Treat floatbarriers like page borders?

When I use the figure environment I like using [bt] options. I now have subsections acting as floatbarriers (using the extraplaceins package), and [b] / [t] does not work due to my restraining ...
2
votes
1answer
139 views

Floats for order of figure in case of double column figure?

I have the following code: \subsection{sub1} \begin{figure*} \centering \includegraphics[scale=0.62]{fig1.png} \caption{ this is fig1. \label{fig:fig1} } \end{figure*} ...
0
votes
0answers
39 views

tikzpicture in figure environment, the figure is not fix to the text

I am writing my master thesis and want to explain how a Matlab function works with a flow chart. The flow chart is edited with "tikz" in a figure, but the figure do not stick to the corresponding ...
5
votes
1answer
54 views

Floats interrupt and push back text

I have a \subsection{Subsection} Text text text \begin{landscape} \begin{figure}[p] \centering ... \caption{Caption} \label{fig:dcspe} \end{figure} \end{landscape} Other text other text other ...
0
votes
0answers
28 views

Staying on same page [duplicate]

this is my problem: \section{Anhang} \begin{figure} \includegraphics{anderegraphen5,6-1.png} \end{figure} The figure will be on the next page, so that Anhnag is the only word on the first ...
3
votes
1answer
94 views

Placing many floating tables

I have written a chapter with many tables (20+) that are all set to 'tbp' for bottom, top and page. There is also text around these tables. The placement of most of the tables turned out to be on top ...
4
votes
2answers
494 views

Putting two images beside each other

If I want to put two images beside each other, what should I do? I have inserted a figure. But, rather than having the next figure on a new line, I want it to be beside the already inserted figure. ...
4
votes
0answers
43 views

Identifying long-distance float and footnote references

Many people have asked questions about how to locate float references such that the float will appear near the first reference (note that a similar - but less common - problem exists for footnotes, as ...
2
votes
1answer
203 views

How to edit the \newenvironment{table} in .cls

The "jfm.cls" code you can get in http://journals.cambridge.org/data/relatedlink/jfm-ifc.zip And the table redefined is as follows in "jfm.cls" \newcounter{table} ...
0
votes
1answer
42 views

Inserted image is at the top of the page [duplicate]

I'm trying to insert an image into my paper however it's being inserted at the very top and not where I want it, my .tex file looks something like this: % Bunch of text here, \begin{figure} ...