3
votes
1answer
41 views

put a figure into the list of table?

I've copied a table from another .pdf and inserted it as a figure in my latex code. Is there an easy trick to consider his label, his caption everything as it was a table? And of course I would like ...
5
votes
2answers
89 views

Spacing problem at List of Figures

I use Lyx 2.1, document class : Report. My problem is that the titles of figures are written on the numbers at List of Figures.
3
votes
2answers
95 views

Auto expand some of the branches in WinEdt tree

My tree panel in WinEdt is like this: I am wondering whether there is a way to expand all the packages and section branches, to avoid having to open all of the sections when looking for a specific ...
1
vote
1answer
61 views

How to customize the chapter in front of figure page in listoffigures?

I am using the the packages \usepackage{url} \usepackage{graphicx} \usepackage{rotating} \usepackage[hypcap]{caption} \usepackage{hyperref} to include referencable graphics in my work. The ...
4
votes
1answer
71 views

How to retain caption without the “Figure” being mentioned?

I'm writing a document and I want to keep it simple. Probably there won't be any ToC or any List of figures so below each figure I just want the name of the figure to be mentioned and nothing else. ...
2
votes
1answer
129 views

How to add the word “Figure” to the list of figures? [duplicate]

I have a problem when trying to add the word "Figure" before the actual number in the list of figures. I guess it will be the same for all languages, since the langauge setting will make it in my ...
6
votes
1answer
182 views

How to make invisible section header noticeable in the TOC?

I used a nice solution from http://tex.stackexchange.com/a/68296/7435 to insert invisible section headers. However, my sections contain floats alone and invisible sectioning doesn't work properly. ...
3
votes
1answer
215 views

List of Figures Citation Issue

I know this has been asked before. However, none of the solutions helped me. I have tried \notoccite and that did not work. My issue is that each figure with a citation in the list of figures counts ...
2
votes
1answer
67 views

suppressing captions of figures but keeping list of figure captions?

I have very long figure captions in a book. I use: \listoffigures to create a listing of these captions right after the table of contents. The figures themselves are given in each chapter. Is there ...
9
votes
3answers
1k views

Generating a separate pdf file of tables and figures from a latex file?

Is it possible to generate a pdf of figures and tables of a paper from latex itself? I saw Journals and Conferences asking for a separate file of tables and figures. In this question, questioner ...
4
votes
2answers
177 views

hvFloat: wrong page number via addcontentsline

I'm still typesetting a book where I have about 10 pictures in every huge part and I want to add their captions to the ToC, not on a separate list of figures. Fot that, I'm using \addcontentsline to ...
5
votes
3answers
170 views

How to include addcontentsline on blank page into TOC

\addcontentsline is written to the toc when the page is "shipped out". If the command is on an empty page which is not written to the pdf or dvi it gets lost. Question: How do I get \addcontentsline ...
2
votes
0answers
72 views

extra line in table of figures [duplicate]

After the last figure of each chapter adds an extra line for me is bad. How I can fix? Attached my configuration. Thank you. \documentclass[letterpaper,11pt,twoside,openright]{book} ...
3
votes
0answers
67 views

Extra page while using simultaneously minitoc and float

I have a problem for a while now: there is always an extra page at the end of my documents. I notice that this happens when I use simultaneously minitoc and float. I track this issue down to this ...
4
votes
1answer
71 views

Selecting a subset of the list of figures produced by \listoffigures?

I'd like to generate a table-of-contents style list of a hand-selected group of figures---that is, a subset of the list captured by \listoffigures. Although obviously I can open the .lof file ...
1
vote
0answers
105 views

Table numbering starts at 2 when chngcntr / \counterwithout used [closed]

I have used the \counterwithout{table}{chapter} to remove the chapter number prefixing from table numbering yet my only table in the document is coming back as '2' I have just done a little debug and ...
2
votes
0answers
28 views

Aligning long entries in LOF using tocloft package [duplicate]

I am facing a problem by left aligning long entries in the LOF using the tocloft package. Although my TOC for long entries looks perfect and aligned, the LOF is not :( . I am using the command ...
3
votes
1answer
173 views

Custom algorithm environment enumerated with algorithm2e and appearing in table of contents

I would like to have two environments sharing a counter and appearing in the same list. One of these environments is algorithm2e and the other is a simple frame for holding algorithms I want to ...
8
votes
1answer
180 views

Remove footnote marks from \listoftables

I'm using footnote marks in my table captions like this: \caption{This is title\protect\footnotemark with a foot note} and then I just use a \footnotetext{Closer explanation...} . This works just ...
5
votes
1answer
113 views

When do we still need the table and figure environments when we don't want the enclosed objects to float?

The LaTeX Wikibook writes: Please understand: you do not have to use floating tables. It only looks more professional. If you want to place your tables where they lie in your source code, do ...
1
vote
0answers
101 views

Latex subections inside figure - toc shows subsections [closed]

I try to put a lot of these elements inside my thesis: \subsection{Maschine} \begin{figure}[!ht] \begin{center} \begin{tikzpicture} \node[fill=gray!10,text width=0.9\textwidth, draw, minimum height=1 ...
1
vote
0answers
20 views

Latex subsections inside figure - toc shows subsections [duplicate]

I try to put a lot of these elements inside my thesis: \subsection{Maschine} \begin{figure}[!ht] \begin{center} \begin{tikzpicture} \node[fill=gray!10,text width=0.9\textwidth, draw, minimum height=1 ...
3
votes
1answer
155 views

Labels do not increment

In my document, I have a lot of short case studies, which I would like to number, just like figures. So I am using this: \subsubsection{Case study \ref{cs:this}: Title} \begin{figure} \label{cs:this} ...
0
votes
1answer
157 views

Is it possible to add hidden text to a caption that only appears in the table of figures? [duplicate]

I want to add additional information about some figures that should only show up in the list of figures. Is this possible?
3
votes
1answer
126 views

Numbering figures and tables in part

Here is the deal: I'm writing my thesis and I divided the thesis into 3 parts, each part had 2 chapters. At the beginning of each part, I added two pages of introduction. However, the numbering of ...
4
votes
1answer
441 views

List of Figures sorted by Figure number

I am using \usepackage{imakeidx} \usepackage{hyperref} and the command \listoffigures to get the list of figures. Some figures are double-column, some are single-column, and LaTeX does not ...
3
votes
1answer
142 views

Why use \listoffigures \listoftables [closed]

Why do people include "Lists of Figures" and "Lists of Tables" in their theses/books? (as generated by \listoffigures, \listoftables, etc.) Besides the obvious reason that they take up space and ...
2
votes
1answer
924 views

Remove individual entries from List of Tables?

This is my first post here, so the TeX code may not appear as desired, but I'll do what I can to provide a MWE. I want to be able to suppress the appearance of individual figures/tables in the list ...
4
votes
3answers
798 views

Can listoffigures use the long caption instead?

Throughout my document I have figures with captions set like this example: \caption[Surface elevation change for Antarctica and Greenland]{Rate of change of surface elevation for Antarctica and ...
5
votes
1answer
134 views

color an entry in the list of figures

I have a command that prints an image and will be used inside a certain environment. First I run a test if the file exists and is a valid image file (see this question for the definition of ...
1
vote
1answer
106 views

Merge items in list of floats

My seraching creativity didn't provide useable results so far, so I have to ask this question... I have a group of related (figure-like) item types (music examples) which I include in different ways: ...
3
votes
1answer
357 views

memoir - sidecaption ignore list of figures

There is a method presented here on how to selectively ignore list of figures. Is there an equivalent method for sidecaptions in memoir? MWE: \documentclass{memoir} \usepackage[english]{babel} ...
7
votes
2answers
603 views

Caption on side by side matrices

I have two matrices side by side, like this: \[ \left[\begin{array}{cc} a & b \\ c & d \end{array}\right] \qquad \left[\begin{array}{cc} e & f \\ g & h ...
6
votes
1answer
758 views

Formatting list of custom floats in classic thesis

I am writing a document using classicthesis package, where I have some algorithms written with the clrscode package. I used package float to create a new float named "algorithm". However when I print ...
4
votes
1answer
338 views

How to list supplementary figures in the list of figures?

I created several supplementary figures in my thesis using the newfloat package as below: \usepackage{newfloat} \DeclareFloatingEnvironment[name={Supplementary Figure}]{suppfigure} When I create ...
8
votes
1answer
161 views

Figures Grouped at the End

A requirement for a paper I'm writing is that all figures occur at the end of the document, with one figure per page, and with a page of figure captions preceding the pages of figures. Is there any ...
4
votes
1answer
100 views

How to eliminate numbers on left side of LoF

I would like to get rid of the numbers on the left side of my LoF, like in this example. I tried \def\figureformat{} but that did not do anything. However, my figures are really full-page pictures ...
5
votes
1answer
2k views

How can I create a Continued Figure Caption?

I have two figures with somehow the same caption with the following code: \begin{figure}[!ht]\centering \includegraphics[height=18cm]{pic1} \caption{caption} \end{figure} \addtocounter{figure}{-1} ...
4
votes
1answer
292 views

Combining subfloat and newfloat packages for sublistings environment

I am using the subfloat package to group related figures; they show up like 1a, 1b, etc. in the List of Figures. Now, I want to define a new listing float using the newfloat package, which generates ...
9
votes
1answer
197 views

Numbering a figure with a symbol in a way that is compatible with \label and \ref

In a long paper, full of figures labeled as usual, there are two figures which I would like to single out and label with symbols. For instance, I would like to have them labeled Figure $\dag$ and ...
10
votes
2answers
2k views

Why are \listof{}{} and \listoffigures styled differently?

I'm writing my thesis and I have certain code-snippets to show. I'm using the the listings package embedded in a custom float environment to display them. To list them in an index at the beginning of ...
5
votes
2answers
669 views

How to add custom floats to \listoffigures?

I created custom float objects using the float package to draw stuff with tikz. \usepackage{float} \floatstyle{plain} \newfloat{tkizfloat}{htb}{lof} \floatname{tkizfloat}{Figure} Is there any ...
2
votes
1answer
748 views

How to modify the Table of Contents to add the words Chapter, Appendix, Figure, Table

I am trying to get the words Chapter, Appendix, Figure and Table into the table of contents. The thesis requirements can be found here ...
2
votes
1answer
114 views

How can I prevent the \listof command from the float package scrambling my headers?

I'm using the minted package, which uses the float package. When I add the 'List of Listings' in my thesis, the \listoflistings command calls the \listofcommand from the float package. My problem is ...
7
votes
2answers
191 views

How can I list items created with the float package in the ToC

I created a new type of float using the float package. \floatstyle{plaintop} \newfloat{recommendation}{htbp}{lop}[section] \floatname{recommendation}{Recommendation} I would like it listed in the ...
2
votes
2answers
144 views

How to embed figure short descriptions (as would be displayed in the List of Figures) within the table of contents in LaTeX?

The document I'm writing has all the figures in Appendix A (since there is a lot of source code included in latter appendixes, it would not make sense to put the figures as the final part of the ...
10
votes
3answers
3k views

Turn off List of Figures for Appendix material

How do I prevent figures in the Appendix from appearing in the list of figures? It seems that after the command \appendix the numbering automatically starts. I've tried leaving the first part in ...
10
votes
1answer
3k views

List of figures: source below image caption?

I'm relatively new to LaTeX and currently working on a paper. In my list of figures, I'd like to have a structure like this: Fig. 1: <Title of figure> . . . 1 ...
1
vote
2answers
635 views

How to make table with caption appearing on \listoftables without \begin{table} environment? [duplicate]

Possible Duplicate: Label and caption without float Create caption without float AND without caption-package? Here is an example of LaTeX document being compiled with pdflatex having ...
4
votes
1answer
3k views

Ignore figure for list of figures

I'd like to include some figures in my LaTeX document just like every other figure but don't have exactly these figures included in the list of figures. Since I couldn't find a solution I have to ask ...