{floats} is about the floating environments figure, table and other, custom-defined floats, and concerns issues such as positioning, labelling, captioning, indexing and listing of said floats. For questions specifically about formatting a float caption, consider using {captions}.

learn more… | top users | synonyms (2)

5
votes
2answers
166 views

Add both a vertical side caption and a normal caption to a picture

Is it possible to add a caption to the side of the picture, written vertically in small size (for the credits), while below the picture is the normal caption? [EDIT] Minor issue: why is it that ...
1
vote
1answer
55 views

Long time for compilation of latex file

I am compiling a single chapter of my thesis using iiscthesis style file given here. http://etd.ncsi.iisc.ernet.in/instructions/templates.htm While including the \begin {figure} \end {figure} the ...
2
votes
2answers
40 views

Is it possible to add subtitles of a figure which contains subfigures

I have a single image which contains two sub-images. I want the following subtitles (a) and (b) to be shown correctly. In which, left sides is my current image which contains two rectangular. And ...
0
votes
2answers
55 views

How to add note and reduce the margin to figure in latex

I have two figures. But I want to used them as one figure in latex. I want to add note for them. For example (a) bellows first figure and (b) for second figure. I used below code but the margin top ...
1
vote
1answer
33 views

I want the text to continue right after the second figure

I am writing an organic lab report, and latex is preventing me from writing my results section right after my second figure. Instead, it starts the results section on the next page. Also, I would ...
2
votes
1answer
43 views

How to not place a `figure*` at next page

In writing a paper in the revtex4-1 class. I have several wide pictures that I include with the figure* environment. On the last page there is already a figure on top that was included with the usual ...
2
votes
1answer
46 views

Couldn't reference the figures [closed]

I am trying to reference the figures in [2] with [1]. The figures are inside multicols. When I compile it, I just get ?? in the refs. I get the error in [3]. What am I doing wrong? [1] References to ...
3
votes
1answer
172 views

How to change Figure 1: to bold Fig.1. in latex

I am using default setting in LaTeX that show Figure 1: Caption.... Now, I am following the format of Magnetic Resonance Imaging journal that require Fig. 1. Caption I tried to add the below ...
7
votes
3answers
292 views

The longtable environment pushes content below it into the bottom margin of a page

When I have two floating environments on a page (one figure and one table), the longtable can push the content below it into the bottom margin of the page. Here is a minimal example: ...
1
vote
0answers
33 views

Problems with references to figures and tables

I am finishing my course conclusion work writing using LaTeX, and insert the images I used standard codes, such as \begin{figure}[!h] \centering \includegraphics[width=13cm]{lixeoutroa} ...
1
vote
1answer
52 views

How to hide axis line leaving axis label?

I would like to hide the black box but not the label of x axis and y axis. The code I used is: \begin{tikzpicture} \begin{axis}[ ybar stacked, ymin=0, %width=\textwidth, height=6cm, ...
2
votes
1answer
67 views

Vertical space between Text and figure

If the code is like this: text text text text text.~\cite{sour}\begin{figure}[htbp] \centering \includegraphics[width=0.9\textwidth]{IMG/fig} \caption{Caption.} \label{fig:figlabel} ...
2
votes
1answer
48 views

APA6 document class figure being placed after bibliography

The Issue I am attempting to have a figure placed at the top of the following page, but LaTeX is insisting on placing it on it's own page, after the bibliography. What I've Tried Using \clearpage ...
0
votes
1answer
38 views

FloatBarrier starting a new page

I have a document with a large list of tables that should appear, in order, in an appendix before the bibliography/references. Initially I had a problem with tables appearing all over the place in my ...
1
vote
1answer
41 views

Multicolumn figure caption?

I have a landscape figure in a portrait article inserted as a sidewaysfigure* from package rotating. Now, when I add (also landscape) caption to the figure, the lines become ca 25 cm long, which is ...
0
votes
0answers
29 views

Image is inserting on a new page when it should insert under previous image

I'm using the following code {\bf Problem 1a} \begin{figure}[h] \centering \includegraphics[width=7cm]{x^2+y^2} \end{figure} \medskip {\bf Problem 1b} \begin{figure}[h] \centering ...
2
votes
1answer
26 views

Problem while using caption for rows of multiple figures in 2 columns and many rows

I have a collection of 10*2 figures which are subfigures of a main figure. I have been able to place them in my Latex document. The result is like as follows: a b c d . . . Figure: 1 (Caption ...
4
votes
1answer
29 views

Float spacing on float pages

I am writing my thesis, and one of the requirements is that any pages containing only figures or tables must be top-aligned. An additional requirement is that the spacing between consecutive figures ...
2
votes
1answer
20 views

Problem with making a “new float” and using \autoref{} command

I'm trying to do a new float called "grafico" with the float package. It works fine, but when I try to do a reference, i.e. \autoref{}, it only shows the float number (e.g. If it's "Gráfico 2.1: blah ...
1
vote
0answers
47 views

large figure in latex

I want to insert a figure in my latex document. I am using the following code: \begin{figure}[!htbp] \begin{center} \includegraphics[width=\textwidth]{image.pdf}\\ \end{center} \end{figure} ...
3
votes
1answer
81 views

Wrap references around a table in a two column document in latex

I'm writing a document in two column format. On the last page of the document, I have a table which overrides two-column. So table occupies entire space in top of the page. After that I added ...
4
votes
1answer
57 views

circuitikz as a float

I used wrapfigure with its package to try to make a circuitikz as a float to put text beside, but I got a warning like "wrapfigure used inside a conflicting environment" and then it drops my ...
1
vote
0answers
45 views

How to put two column images to the right or left column?

The paper is two-column format. The two column images latex code looks like this: \begin{figure*}[t] \centering \includegraphics[width=0.2\textwidth]{Paper_Fig1} ...
1
vote
2answers
113 views

How to put a subcaption inside a tikzpicture?

I have put a few images inside a tikzpicture. Now I want to add a subcaption for each of them. How is this possible? I also tried \captionof which didn't work either. Minimum not working example: ...
2
votes
1answer
59 views

Float listings in LyX with classicthesis style

I can not figure out how to insert floating listings in LyX with (or without) classicthesis style. Any hints would be highly appreciated.
2
votes
1answer
47 views

How do I insert a 'floating' page number for the location of a Figure that may change as I continue to edit my book?

I have three Figures in the back of my book that I want to refer to by page number. "Figure 1.2, which is located on page number 142" or something like that. However, as the book is currently being ...
1
vote
0answers
16 views

List of images used in the document latex [duplicate]

I have written a book and inserted a lot of illustrations. All illustrations are input in my document as: \begin{center} \includegraphics [scale=1]{image/1_12.pdf} \end{center} I have about 500 ...
3
votes
1answer
59 views

More floats with memoir [closed]

I'm writing a thesis with memoir. The numerous footnotes are rendered as sidenotes (marginpars) using memoir's \footnotesinmargin (memman.pdf p245). This, with the addition of the marginfix package, ...
1
vote
1answer
226 views

LaTeX Error: Unknown float option `,' [duplicate]

I am working with texshop on Mac and because of an upgrade to El Capitan, I had to reinstall tex live. Now I have a problem with older files where figures are inserted. I get the message LaTeX Error: ...
2
votes
1answer
31 views

floatflt vs amsthm

I'm trying to use floatflt (or one of the other packages that gives floating figures in the margin) with amsthm, and ran in to the issue that the AMS theorem-like environments are defined using ...
2
votes
1answer
84 views

Forcing text to go on after figure

i have a problem with the spacing after a figure in my document. Here is the code i use: ...
1
vote
1answer
44 views

Inserting a not floating image

I need to add a picture to to a latex document and apply multicol environments to it so it may not float. If I just use \includegraphics it can be used with multicol but I cannot use a caption for it. ...
1
vote
1answer
32 views

Figure textwidth and badbox

I am using a documentclass requried by a journal, which also defines the format of a picture. I am using the following code for expanding the figures to the page width and getting badbox error. What ...
1
vote
1answer
64 views

Placing page numbers on top of full screen figures

I have a lot of full-page images in my document, right to the edges. Some of them are jpegs, some are pdfs. I need to superimpose page numbers on top of these figures, but generally the figure ...
0
votes
0answers
13 views

Problem in figure environment in article [duplicate]

\documentclass{article} \usepackage{graphicx,amsmath,tikz} \begin{document} \begin{figure} \includegraphics{1.2.jpg} \caption{d} \end{figure} \end{document} By using the above code I am getting the ...
0
votes
1answer
25 views

Floating image across 2 of four columns

I wish to design a four-column poster, and I have an image that I would like to float across the middle two -- but not all four -- columns. The standard things I've been able to find involving figure* ...
4
votes
0answers
93 views

Why is this random letter 'y' here? [closed]

I'm making a document for a class, and I've encounter an odd problem. The document has a mysterious letter 'y' in the top right that I can't figure out where it came from or how to get rid of it. Here ...
1
vote
0answers
31 views

Line Spacing of Text after figure including [duplicate]

I am having quite a small problem, which I can't solve alone. It's about the line spacing after including an image and there is always a line spacing in the text below the image. Here's the code: ...
2
votes
1answer
45 views

Figures numbering in arabic while chapters in roman

I have an issue with the numbering of the figures. I have my chapters numbered in Roman thanks to the command \renewcommand{\thechapter}{\Roman{chapter}} (Chapter I, Chapter II etc.). Therefore, I ...
3
votes
1answer
49 views

I am struggling to get some of my figures labelled as schemes

Underneath some of the images in my document I would like the caption to read scheme1.1 etc. instead of figure1.1, I was wondering if it was possible to do this selectively as I use Chemdraw to draw ...
0
votes
0answers
16 views

the figure displayed out of The text at right side of the page in an Arabic text, this problem is associated with the \usepackage[arabic]{babel}

\documentclass[a4paper,11pt,oneside]{book} %\documentclass[11pt,a4paper]{article} %\documentclass[11pt,twoside,a4paper]{article} \usepackage{float} \floatstyle{boxed} \restylefloat{figure} ...
4
votes
1answer
39 views

Change side-figure name and numbering

I'm writing my thesis and I have one Chapter that is a step by step instruction manual. I'm using the package sidecap to get a figure on the outside of the page with caption beside it. What's ...
1
vote
1answer
88 views

How do I allow paragraph text to continue on a figure?

I have a figure (in a rectangular frame), with blank space on the top two thirds of the left half of the image. I want to let paragraph text continue through this blank area (as if the figure didn't ...
0
votes
1answer
20 views

Positioning subfigures [duplicate]

I would like to position three subfigures like this: (a) (b) (a) (c) Figure (a) on the first roll and figures (b) and (c) on the second. Some light, please? Thanks in advance.
4
votes
1answer
46 views

Is it possible to place floats some lines from top (or bottom) of page?

Question: I wonder if it is possible to kindly tell LaTeX to put floats (automatically) either 1) some lines from the top of the page or 2) some lines from bottom of the page? To clarify: I ...
1
vote
1answer
74 views

Figures and text side by side

I'm struggling to put a series of five graphics side by side with the normal text. The figures are put as subfloat and placed inside a common figure environment to be able to give them a common ...
4
votes
2answers
51 views

Why Strange Formatting For My Caption

I am trying to include an image with a nice caption below it. I have the following: \documentclass{article} \usepackage{graphicx} \begin{document} \begin{figure}[h] \centering ...
1
vote
0answers
23 views

“Floating” figure/table within a full page box

I am writing a twocolumn landscape report with occasional full-page boxes. In these full-page boxes, there are typically figures, which I am currently manually placing. I would prefer that the figure ...
2
votes
0answers
83 views

Wrap figure challenge: is it possible in latex?

I am struggling with a problem: I need to have a lot of wrapfig positioned in the top right corner of the page. I don't want to do a manual tweaking, but a solution similar to \begin{figure}[t], that ...
1
vote
3answers
225 views

How can I insert the figure inside text without caption and label in LaTeX?

I would like to have something like this: