{floats} is about the floating environments figure, table and other, custom-defined floats, and concerns issues such as positioning, labelling, captioning, indexing and listing of said floats. For questions specifically about formatting a float caption, consider using {captions}.

learn more… | top users | synonyms (2)

2
votes
0answers
23 views

Control figures grouped inside a section when there are a lot of them

I am working in my homework where there are a lot of figures. I have a visual problem with figures which they must only placed inside a specific section, but they are shown in the next section. This ...
2
votes
1answer
37 views

Is there a possibility to remove unprocessed floats?

At some points of the document I want to remove the unprocessed floats and simply not typeset them at all. Therefore is \clearpage or \FloatBarrier not an option, because they flush the floats. Does ...
0
votes
1answer
39 views

Two consecutive wrapfigure images

How can I display two consecutive images on the right of the page, with the second appearing below the first? At present the first does not float at all, only the second does. I do not want to place ...
0
votes
0answers
17 views

How to suppress numbering of some (but not all) margin figures in Tufte Latex? [duplicate]

I am using the book class of Tufte Latex. I have two types of margin figures, where for one type I'd like to keep the default setting, but for the second type I want to suppress the numbering and text ...
3
votes
1answer
62 views

\subfloat \caption odd behavior

I'm very new to Latex and trying my best to adopt it as my method of choice for paper and my Thesis. I have always managed to solve any problems encountered by browsing through this forum but can't ...
2
votes
1answer
50 views

Shift all floats on page horizontally

I would like to modify the way standard floats, like figure or table, appear on page by shifting them horizontally relative to the paragraph text, see the image below. To this end I have tried to ...
2
votes
1answer
70 views

Scale figure inside tikzfigure environment in tikzposter class

I am trying to make my poster with the tikzposter class. I want to place a figure inside a block and I have to use the tikzpicture environment. But I can't scale the figure properly. \documentclass[...
0
votes
0answers
38 views

footnotes just after algorithm

I am trying to add footnotes at the end of an algorithm environment (not at the end of the page). I found this post where this is done but there are no numbers to refer to the footnote. So if I want ...
4
votes
1answer
40 views

Why my figure shows up behind the text?

I'm trying to fit one image to the page width while using a 2-column framework: \begin{figure}[ht] \centering \includegraphics[width=\textwidth]{mp-f-k} \caption{Happy Smiley} \end{figure} ...
2
votes
1answer
57 views

How to use subfigure to make the following table of figures

|Fig A| FigC| |Fig B| - | FigC should span the entire column. Thanks for the help.
1
vote
1answer
36 views

2 figures in 2 rows, not getting aligned properly

I am trying to put 2 plots from matlab one above the other using subfigure. However, they are not getting aligned properly. Also, can anyone please advice as to how the text on the graph axis can be ...
4
votes
2answers
110 views

Big picture with several smaller ones on the side

I'm trying to achieve an effect like _____ ___ ___ | | |___| |___| | | ___ |_____| |___| but I can't get it to allgn correctly to the top. I tried with two minipages, the second ...
2
votes
2answers
50 views

Universal numbering for figures and lstlistings [duplicate]

I use ShareLaTeX for my thesis and I am facing a problem. I have used the following code to change figures' name to "Εικόνα" and lstlistings' name to "Εικόνα" too. \renewcommand{\lstlistingname}{...
3
votes
3answers
51 views

Wrap text around figure on whole page

In my document I have a huge data flow graph that is exactly one page high. Since it is not very wide I'd like to have it on the left/right side of one page while having normal text on the other side. ...
0
votes
0answers
34 views

Problem with figures spanning across 2-column

I am trying to add a figure that spans across 2-columns. It works on my local installation of TexWorks, however when I try to compile the exact same LaTeX code on ShareLatex.com it doesn't appear. The ...
1
vote
1answer
32 views

Trouble With Boxed Figures [closed]

I am using boxed figures for all of my images, and my diagrams whose raw images don't have borders look great. However, I would like to insert images that have a definite border (namely mock-up ...
1
vote
0answers
26 views

Place pictures and ref it without using subcaption

I am writing a paper using Springer LNCS format, which is incompatible with the package subcaption. It provides subfig package instead. I wish to achieve the following format (3-by-2, refer each one, ...
12
votes
1answer
206 views

text, margin, and text + margin width floats without using tufte class

I want to use the marginfigure, figure*, and figure environment as defined in tufte-book and tufte-handout classes (see respectively Figure 1, 2 and 3 in the template example). It means being able to ...
2
votes
1answer
41 views

How can I remove the numbering in the figure environment?

\documentclass{beamer} \usepackage{caption} \begin{document} \begin{frame}{Title} \begin{figure}[ht] \centering \includegraphics[width=0.9\linewidth]{picture.jpg} \caption{Source: something} \end{...
1
vote
0answers
26 views

Should tables go before or after figures?

I am preparing a document with a lot of figures and also some tables (both, figures and tables are usually very wide, about textwidth, and not very high). Sometimes it is inevitable to put two float ...
3
votes
1answer
70 views

newfloat vs tex4ht

When using newfloat to create a new type of float, tex4ht swallows the first line of text inside the float when it converts to .odt format. In the MWE, the new float is example; this works the same ...
2
votes
1answer
66 views

Caption doesn't display correctly

I've been searching for quite some time to find an answer to my question, but I can't find anything I can use. When my caption text exceeds the width of the line, it is displayed just like standard ...
0
votes
0answers
20 views

Densely packing floats

I have a document with many tables of various sizes. For the last page, I'd like to produce a quick reference with condensed versions of all these tables. Is there a way to get LaTeX to pack a bunch ...
0
votes
0answers
40 views

Figures and examples with independent numbering

My teacher wants us to use Examples for citations from the text/scores (I'm studying music) and Figures for our own conclusions about it with independent numberings. Is it possible to do? Cheers, ...
1
vote
1answer
35 views

figure not shown or causes undefined control sequence

I am using TexStudio but when I tried to compile my file with pdflatex I had the same issues. Only one of my figures is not displayed in the pdf file. All figures are .png. I have tried to switch to ....
0
votes
0answers
17 views

How to prevent algorithmic from floating? [duplicate]

I have seen similar questions usually with the opposite problem and this is confusing me like no other. I would appreciate any help in getting this to work. I am using the algorithmic package to draw ...
1
vote
1answer
61 views

Sketching within a Solution Environment

I wish to sketch a set within a solution environment, but my attempts have led to the following error message: LaTeX Error: Float(s) lost. How do I fix this? Here is a snippet of my code \...
0
votes
0answers
31 views

flow diagram in a double column page

I can draw a flow diagram. I want to have my small flow diagram on the first column of a double column document. my flow diagram always appear on a separate page. I dont want this to happen. It never ...
1
vote
1answer
41 views

The [H] doesnt change figure* placement, printed on page instead

I'm trying to modify my figure placements, but the [H] (and [!ht], etc) isn't working. It has no effect on the figure placement, and I get the text "[H]" added just before the image. MCWE: \...
2
votes
1answer
41 views

How to change arrowhead size and scale in TikZ?

I have been working on this figure and I have some problems. How can I change the size of the arrowheads? How do I place zero directly below the vertical line? How do I change the scale of the ...
3
votes
1answer
56 views

Is it possible to insert figure, caption, graphic from other tex file

I have two .tex files. The first .tex file includes two figure: Fig.1 and Fig.2. Could I cross reference whole detail of each figure in other tex file, including graphic, caption, figure number...? ...
3
votes
2answers
103 views

How do I get the height of a figure in LaTeX

I have some LaTeX code \begin{figure} ABC \caption{def} \end{figure} And I would like to be able to find its height in a pdf output. The method outlined here doesn't work, yielding the ...
0
votes
0answers
28 views

How to avoid figures to be pushed to the end of documents in LyX

I am using latest LyX version of classicthesis template. I know there is a similar question, but it is in LaTeX, not LyX. I have limited knowledge in LaTeX, so I really appreciate it if anyone can ...
0
votes
1answer
39 views

Incorrect vertical white space between paragraphs due to figure

When inserting a figure in my latex document at a position where the figure cannot be placed precisely (e.g. at the bottom of a page in the pdf document), Latex nevertheless inserts white space ...
1
vote
1answer
41 views

two column, landscape page

I'm writing an article, with 2 columns. Because my picture is too large I want to put it on a new landscape page. So I used the following code: \newgeometry{left=3.0cm,bottom=30mm,top=20mm} \...
1
vote
0answers
27 views

Vertical subfigures - what is the proper way? [closed]

I'm using caption, subcaption packages and generally going with this wikibook. However it is not clear to me how to simply place subfigures with captions one over another. I've tried this \begin{...
0
votes
0answers
25 views

Missing Pictures

I have prepared a tex file including pictures in it. But when I tried the open the document in another computer all the figures are gone. Is there any possible way to keep the figures? \begin{figure}[...
3
votes
2answers
35 views

Changes to spacing inside floats

I have a two-column style, but sometimes I want to put some text across the whole page. An easy way to do this is inside one of the starred float environments. I am using table*. However, I notice ...
0
votes
0answers
11 views

LyX: With Figure-Wrap-Float, my figure keeps showing up on the last page of the output PDF

How do I get my figure to show right next to the text? I've tried most of the possible settings and nothing seems to work.
3
votes
1answer
54 views

Two tikz png's from matlab to tex in same figure gives grouping error 255

I've tried to create a figure in LaTeX for my MSc thesis using two separate tikz figures. The tikz figures were exported from MatLAB using the following command: matlab2tikz('tikz/figure.tikz', '...
2
votes
1answer
31 views

Make figure placement consider the opposite column as a close location

In my article draft, I have a table, followed by a piece of text, followed by a figure with [t] placement. This is a two-column paper. As things stand, the figure gets placed at the top-left of the ...
2
votes
0answers
37 views

Why text beyond the bottom of the page [duplicate]

I encountered a very strange problem. I wrote an enumerate after a long table, the enumerate text will be printed outside the bottom of a page, and some item text can not be shown. I simplified a ...
2
votes
3answers
178 views

Getting a landscape Tikz figure to fit on page

I have the following large tree in tikz that I am trying to display as part of my thesis. Needless to say, the tree is to large to fit in portrait mode, so I have been trying to get it to fit in ...
2
votes
1answer
42 views

Two column page with different heights

I am trying to utilise all the whitespace in a two column (ieee) format document. A set of tables must stay grouped on the same page, thus I've nested them under {table*}. Having done that, I now ...
1
vote
2answers
46 views

How to increase the font size of the tables contents in latex?

The MWE is as follows. When I compile the below mentioned code it results in correct output, but the generated output is very tiny. Is there any way to increase the font size of the table cells, while ...
0
votes
1answer
40 views

Keep Figures RIGHT AFTER text [duplicate]

Im still searching and trying to manage with this float figures but with no success. I really need that my figures stay right at the place that they are called, not on the next page! My document is ...
1
vote
1answer
47 views

Stopping a page-wide table from pushing subsequent column-wide tables down

I'm working on a document using a two-column layout. In it, I have one page-wide table (table*) and several regular column-wide tables (table). Problem is, as the table* is always placed on the ...
1
vote
0answers
50 views

Centering too wide figures?

How do I center these two figures that are too wide? \documentclass{amsart} \usepackage{amsthm, amsfonts, amsmath, amssymb, mathrsfs, enumerate,graphicx} \usepackage{pgfplots} \usepackage{...
1
vote
1answer
39 views

How to insert figures with two column break

I need to insert some plots with one column in a two column style. How can break it. I use the IEEE journal paper style.
0
votes
0answers
29 views

tufte: two tables on the same page

I have two tables which are about 40% of the page height. Both are related and should stay on the same page. Therefore I put both tables inside a minipage and made it floating. \documentclass{tufte-...