{floats} is about the floating environments figure, table and other, custom-defined floats, and concerns issues such as positioning, labelling, captioning, indexing and listing of said floats. For questions specifically about formatting a float caption, consider using {captions}.

learn more… | top users | synonyms (2)

0
votes
0answers
70 views

\includegraphics command is “an undefined control sequence”?

I just posted a question on LateX but here's another... Simply, how do I add pictures and what exactly is the principle to it in Latex? I mean, I google, I see a bunch of commands but honestly, I do ...
1
vote
0answers
23 views

Picture goes to a new page when inserted

I have now managed to insert a picture into my LaTeX...but now, I cannot place it where I want it to go :/ For some bizarre reason, the picture, when inserted, goes to the next page, a new page, ...
1
vote
2answers
16 views

Subfigures on multiple pages

I want to have three figures that are each large (taking a full page each) be labeled as Figure 1.4 A, Figure 1.4 B, Figure 1.4 C, etc. rather than Figure 1.4, Figure 1.5, Figure 1.6, etc. I ...
2
votes
0answers
16 views

Double column float number with IEEEtran and dblfloatfix

dblfloatfix allow to place floats at the bottom of the page, however if by lack of chance there is another float on the same page, the correct numbering is not achieved (i.e. the double column float ...
1
vote
1answer
39 views

Adding figures on first page of documentclass article

I'm using the default article documentclass for a document that is just supposed to hold the accompanying figures for a paper. This is what I'm doing: \documentclass{article} \usepackage{graphicx} ...
0
votes
0answers
15 views

A0 poster floatbox errorwhen including graph

I have the following: \documentclass[a0,portrait]{a0poster} \usepackage{graphicx} \usepackage{amsmath} \usepackage{morefloats} \usepackage{float} ... \begin{figure}[H] ...
2
votes
1answer
169 views

captions overlap figures in *.pdf file after dvi2pdf (while appearing normal in *.dvi file)

For some reason, figure captions that appear underneath the figure in the *.dvi file, overlap the figure in the *.pdf file generated using div2pdf. Any idea why this happens? Thanks, Ofer.
0
votes
0answers
34 views

Moving figures above each other

How is it possible to move figures above/below each other without being hidden? It seems not to be possile to make two consecutive figure environments and place a \vspace{} inbetween to get them ...
1
vote
2answers
49 views

Border of pictures are not coming in longtable

\begin{longtable}{|lllllllll|} % [ht] \caption{Create } \\ %\label{step 3} \hline \multicolumn{3}{|l|}{\textbf{Prefix}} & ...
1
vote
1answer
15 views

float - Positioning tables and pictures

I want to have a full page table and after it, two full page pictures. But the pictures always appear before the table. If I try using FloatBarrier, it end up producing a page break after the table ...
3
votes
1answer
25 views

Create a custom figure source page or list

I've reviewed the answers at Add source to figure caption question and some other question on the site. Unfortunately they do not fully achieve what I'm looking for. What I am trying to do is create a ...
0
votes
0answers
19 views

headers and footers acting strangely with floatpag package

Using the fancyhdr package, I have a LaTeX document with the following headers and footers: Underlined chapter name at the top of each page. Page number at the bottom of each page. I was also ...
4
votes
1answer
2k views

Putting two-column long figure in Revtex4-1

I have a problem with APS's revtex4-1. I want to place an twocolumn-wide figure at the bottom of the page. I know \begin{figure*}[position] picture \end{figure*} in {article} document class ...
0
votes
0answers
31 views

Attempting to replicate some beautiful papers I have recently read

I have recently read some really beautiful papers: https://web.eecs.umich.edu/~zmao/Papers/conextDefendHijack07.pdf http://rio.ecs.umass.edu/mnilpub/papers/securecomm07.pdf Is anyone able to ...
0
votes
0answers
15 views

Float(s) lost: Problem (Possible) from afterpage + double-column

I am working on a package which allows for figures with many subfigures which can break over multiple pages. So far, my figureSeries package is working in most scenarios, except that I sometimes get ...
0
votes
1answer
187 views

Tikz drawings side by side

I am trying to draw two figures (three, in fact, but even two is not working) side by side using TikZ. I added two TikZ drawings in matrix.tex using \newcommand and tried to add them in the main ...
2
votes
2answers
37 views

Force placement of currently unplaced figures before a certain block of text

A paper I am writing is quite figure-heavy, and one of my sections has more figures than text. Unfortunately, because of this, the figures get spread out through the rest of my paper and even end up ...
0
votes
0answers
34 views

How to fix the space between “Figure” and “5” in “Figure 5:” in figure caption?

I use this solution to get captions for my figures at the side, which works really fine. But sometimes, if the word behind "Figure xyz:" is too long for the line, I get something like this: How can ...
0
votes
1answer
148 views

Can I add 3D objects as subfigures (using movie15)

I have faced one stiff problem that when I try to add four 3D plots (2 rows x 2 columns) in my beamer by using subfigure approach, I fail! This is my minimal example: \begin{frame} \begin{figure}[t] ...
0
votes
1answer
31 views

Spacing of notes below a figure

I've trying to adjust the spacing of the text lines of notes I have below a figure. The font size of the note is, for instance, footnotesize, but the space is the same of the regular text I have in ...
3
votes
3answers
937 views

Floating figures and tikzposter

I'm trying to use the class tikzposter to write a scientific poster. I need to link the figures to my text, therefore I need to use \caption and \label commands. It seems impossible to use floating ...
0
votes
2answers
27 views

An icon figure with actual figure side by side

In a LaTeX book, I want an icon figure placed outside the regular text margin and an actual figure within text width. I need no caption or figure number for icon figure. I have seen \marginpar ...
4
votes
2answers
19 views

Creating a new float environment without the numbering but still displaying the float type

So I would like to create a new float environment using the float package (for example) but without a counter: \documentclass{article} \usepackage{float} \floatstyle{ruled} \newfloat{afloat}{t!}{log} ...
2
votes
1answer
17 views

how to keep float out of gather env

I was making description under equation using gather method from this this page. \begin{gather}\label{eq:1} R=\rho \frac{l}{A}, \intertext{Where:} \begin{tabular}{>{$}r<{$}@{\ :\ }l} ...
1
vote
1answer
24 views

How to force oversized figure off of the bottom of the page and up to the top

I have a figure that is bigger than the margins. In the long run, the size won't matter. But for now, Latex is putting it on its own page (which is fine) and placing it at the very bottom of the ...
0
votes
0answers
6 views

bibliography caption sources

I'm used to have the sources of my images only in the listoffigures by writing them in the listentry part of the caption \caption[Test\cite{source1}]{Test} I also have a macro so you dont have to ...
1
vote
0answers
55 views

How to preserve information after exporting Tikz code from Geogebra and compiling it?

I use Geogebra to draw the figures in my book, exporting it to Tikz code to compile. However I found that the information of labeling in Geogebra was lost after exporting or compiling, and it ...
2
votes
2answers
33 views

Asymmetrical Composition of images

I am desperately trying to arrange my images as in this sample figure for my paper and I am stuck. Has anyone been able to do this successfully and could give me some pointers? It should be noted ...
0
votes
0answers
33 views

Wrong list of figure page number. I am not sure why my following code is generating wrong page number for table of figures

\documentclass[12pt]{report} \raggedbottom %\setkomafont{chapterentry}{} %\setkomafont{chapterentrypagenumber}{} \usepackage{amsmath,amsthm,amssymb,latexsym,amscd} \usepackage{setspace,thesis} ...
1
vote
2answers
28 views

How can I ensure that a figure is displayed following another one?

I have two figures in my document: \begin{figure} \begin{tabular} ... \end{tabular} \caption{Notation used in the big complicated table} \end{figure} \begin{figure} \begin{tabular} ... ...
3
votes
2answers
46 views

List of figures - image source in captions

When I insert a image I usually do it this way \begin{figure} \includegraphics[width=\textwidth]{bilder/duese_halb} \caption[Image-Test \cite{source1}]{Image-Test} \label{fig:image-test} ...
1
vote
1answer
39 views

figcaps package: How to print figure captions and then tables?

I am using figcaps package, it puts at the end Tables and then Figure captions. I want to have first Figure captions and then Tables. Is there any solution? Code: \documentclass{article} ...
4
votes
4answers
125 views

Footnote to figure

I want to add a source address of my address like this: But the address must start from the beginning of figure like this: How can I do that? Thanks
4
votes
2answers
5k views

Per-subsection figure numbering

I want to have per-subsection figure numbering in the appendix of the following MWE: it should read "Figure A.1" instead of "Figure 2". \documentclass{article} \usepackage{amsmath} ...
1
vote
0answers
12 views

How to force footcites respectively footnotes in a caption of a figure on same page as the figure

Is there an elegant way to force a foot cite in a float object in case a figure to be on the same page as the float object(figure) without restrict the position of it, as mentioned here: ...
0
votes
1answer
143 views

texmaker bullet in .eps figure equation shows infinity symbol

I am using Texmaker on windows 7 and I'm trying to include a .eps figure which has bullet symbol in it, and for some reason, Texmaker shows an infinity sign instead. I've checked my .eps file, and it ...
2
votes
1answer
102 views

Interdependencies between subfig, subfigure and subcaption for journal papers

I am using informs3.cls template to write a paper. I have run into serious difficulty when making a figure with subfigures. The problem is that: subfigure package is obsolete. subfig is not ...
1
vote
1answer
34 views

How can I cite the subfigures in this form figure (a-c)

I have formatted the subfigures in a figure as following \usepackage{subfigure} \begin{figure} \centering \subfigure[]{\label{fig:sub:a} \includegraphics{...}} \subfigure[]{\label{fig:sub:b} ...
0
votes
0answers
47 views

I can't figure out how to ccreate a complex latex figure with lots of formulas

For practice, I am trying to emulate a figure from a paper I found. It looks like this: Right now, what I have looks like this: I think I managed to get the two blocks on the top right, using ...
0
votes
1answer
26 views

Text on one side and figure on the other side of A3 paper

For now, I have two minipages in a minipage on a A3 page, and the text should be on the left in normal height and the figure to the right (which works). I have a problem with the text in a minipage ...
4
votes
1answer
58 views

Creating a Droste Effect

Is there any way to achieve a Droste effect in LaTeX? For instance, I'd like to generate a floating figure that contains a rendering of the page it is included in.
1
vote
0answers
8 views

reference to figures in the appendix is not correct in REVTEX [duplicate]

I would appreciate any help with a problem that I have with reference to figures in my appendix. For example, instead of (Fig. A.1 ), I only get (Fig. A). I read all the previous posts but they did ...
1
vote
1answer
19 views

Two column document, 2X1 figure placement

I need to place 3 figures in a two-column document, wherein the 3rd figure at the bottom needs to be centred! How can I do this? I want something like this: To do the same for 4 figures I have ...
1
vote
2answers
45 views

Positioning a figure inside a figure environment

I have a tricky problem: Imagine two graphs in a figure environment and each in a minipage so that each graph gets half of the textlength. Now I realised that I need to put on the right side of each ...
1
vote
1answer
58 views

Putting figures+caption in the margin

Is there a "clean" way to make figures and their caption appear in the margin? I'm using memoir with the companion pagestyle, so the margin is quite assymmetric and I think it might look nice enough ...
0
votes
0answers
27 views

Problem with images and different sections

I am having problems with images and sections. Here is an example. My fig 4 is from the section A, and i think that it doesn't fit in the section A because of the end of the page and LaTeX put it in ...
3
votes
2answers
5k views

“Environment subfigure undefined” on journal submission

I have a LaTeX file with packages \usepackage{amsmath,amssymb} \usepackage{graphicx} \usepackage[colorlinks=true,citecolor=black,linkcolor=black,urlcolor=blue]{hyperref} ...
2
votes
1answer
50 views

How can i print the label of a subfloat inside a TikZ node?

I'm laying out a few tikzpictures side by side (made with pgfplots, but I think it should not matter). I'm trying to use the subfig package to be able to reference single subfigures. Everything works ...
2
votes
2answers
49 views

Horizontally and vertically center a figure and scale to fill the whole page in landspape orientation

I want to have an image that fills a landscape page. I have tried: \documentclass[a4paper]{report} \usepackage[utf8]{inputenc} \usepackage{pdflscape} %Gives us landscape pages with ...
1
vote
1answer
20 views

RevTex4-1 figure reference wrong number? [duplicate]

I have included a graphic using \includegraphics into a \begin{figure} \end{figure} in revtex4-1. The figure appears in section II (i.e. 2) but the caption of the figure says Fig.1 (this is not a ...