{floats} is about the floating environments figure, table and other, custom-defined floats, and concerns issues such as positioning, labelling, captioning, indexing and listing of said floats. For questions specifically about formatting a float caption, consider using {captions}.
106
votes
2answers
10k views
How to influence the position of float environments like figure and table in LaTeX?
How to influence the position of float environments like figure and table in LaTeX?
This is a general question and should collect useful answers for all users. I hope we can use this as a reference
72
votes
7answers
27k views
Keeping tables/figures close to where they are mentioned
Is there any package or a method to force LaTeX to keep floating environments like table and figure closer to where they are declared?
96
votes
1answer
8k views
Should I use center or centering for figures and tables?
What is the correct way to center figures and tables (figure, table)?
\begin{center}
...
\end{center}
or
\begin{centering}
...
\end{centering}
40
votes
1answer
7k views
Continuous v. per-chapter/section numbering of figures, tables, and other document elements
Some document elements (e.g., figures in the book class) are numbered per chapter (figure 1.1, 1.2, 2.1, ...). How can I achieve continuous numbering (figure 1, 2, 3, ...)?
And vice versa: Some ...
36
votes
2answers
3k views
How do I ensure that figures appear in the section they're associated with?
Often floats may land quite a bit later in the document than the point they are created, sometimes after a section break.
Is there a way to force a new section to start on a new page, after any ...
31
votes
2answers
5k views
Center figure that is wider than \textwidth
I have a figure that is wider than the \textwidth of my document. (I don't want to change the \textwidth.) As a result, the leftmost part of the figure is flush with the left margin, while the ...
37
votes
3answers
9k views
subcaption vs. subfig: Best package for referencing a subfigure
On this question a comment by Martin H says, that one should forget about the subfigure and subfig packages and use subcaption. As subfig replaces subfigure, no argument there.
I am currently using ...
50
votes
2answers
62k views
Force figure placement in text
I have a problem when a lot of figures are in question. Some figures tend to "fly around", that is, be a paragraph below, although I placed them before that paragraph. I use code:
\begin{figure}[ht]
...
54
votes
1answer
3k views
How to include a picture over two pages, left part on left side, right on right (for books)?
When writing a long book (from 300 to over a 1000 pages), there is often need to include large pictures and one wishes to have them displayed over two pages, left half on the left page, right half on ...
15
votes
4answers
3k views
How to avoid splitting tables between sections
I have 5 tables and a section after them. After creation of an output file I have two tables on one page, then a section and last 3 tables on next page.
What I want to achieve is to put tables and ...
14
votes
2answers
6k views
Two figures side by side
How can I put two figures side-by-side? Not two sub-figures, but two actual figures with separate "Fig.: bla bla" captions. A figure is supposed to spread over the entire text width, but I have two ...
35
votes
3answers
7k views
Why should a table caption be placed above the table?
In the papers I read the caption in figure floats is placed below the figure and in table floats the caption is placed above the table.
I recognize that this is a common style that a lot of people ...
17
votes
2answers
13k views
Table and Figure side-by-side with independent captions
Looking to put a table and a figure side by side so that the table and figure have their own captions. A crude sketch
------------ -----------------
TABLE
| a | b | ...
15
votes
1answer
4k views
How to make a figure span on two columns in a scientific paper?
If I just try to set the figure's size to 0.9\textwidth my figure will just end up on the right column, sized to be two-columns wide.
Has anyone done this before?
8
votes
1answer
501 views
How to protect text from being split by a float?
Given following situation:
\begin{figure}[ht!]
...
\end{figure}
\begin{equation}
...
\end{equation}
Some one-line text.
\begin{eqnarray}
...
...
\end{eqnarray}
how can I make ...
17
votes
3answers
1k views
Table and multi-page
I'm writing some sort of book and i've got a very large table.
I was wondering if there was a way to span a table not in the length but in the width.
In the end, i would like to be able to divide ...
17
votes
2answers
12k views
Change caption name of figures
How can I modify the caption name of a figure? For example I have
\caption{This is a figure.}
and by default the caption appears as
Figure 1: This is a figure.
However I want
Fig.1 - This ...
16
votes
3answers
8k views
Placing figures inside a two-column document
I'm trying to get images in my document in two different ways:
On top of the entire page, centered
On top of a single column
I tried it with both twocols and multicols. I ruled out twocols because ...
19
votes
1answer
411 views
href to an image label - how to jump to the image instead of the caption below the image?
I'm using the following command to embed images in my LaTeX document (which is then rendered as PDF)
\newcommand{\img}[4]{
\begin{figure}[!hbt]
\centering
\vspace{1ex}
...
16
votes
4answers
2k views
Place figures side by side, spill into outer margin
I would like to place two figures side by side (not subfigures) and what’s more, I’d like to let the figures spill into the outer margin (since they are too wide for the the text width. Like this:
...
6
votes
1answer
1k views
Rounded corner colored box around figure
I'm trying to get Rounded corner grey-colored box around figures.
One solution would be to use
\usepackage{float}
\floatstyle{boxed}
\restylefloat{figure}
but this results in black box around a ...
13
votes
2answers
21k views
How to fix table position
Table does not show up at the same position it was inserted in the TeX file. I got the understanding through bit of reading on this forum that they are floats and they pick the best place on the ...
14
votes
2answers
1k views
Figures on left pages, text on right ones with class book, numbering only on right pages
My problem is that I would like to have either blank or figures on the left pages, and text on the right ones, with the numbering of the right pages to be 1,2,3,4,5 and not 1,3,5,7.
It means, in a ...
8
votes
3answers
8k views
How can I get the figures not to be pushed to the end of the document?
For some reason, my figures get pushed to the end of the document. I tried begin{figure}[t], [h] and other options, but none helped. Any ideas how to get the figures to appear much earlier in the ...
6
votes
1answer
494 views
Figure numbers using the section number
One of my sections seems to be using the section number rather than the appropriate figure number for \ref's that point to figures. (Theorems and the like work fine.) As far as I can tell, there's ...
12
votes
1answer
273 views
Force floats to be typeset after their occurrence in the source text?
AFAIK a figure or table should always be placed after the first reference to it in the text.
So I always place the code for my figures and tables after the paragraph which contains the first ...
10
votes
3answers
503 views
Extended draft mode which includes source information for manual print-out to source synchronisation
I'm looking for a kind of extended draft mode which places the source code position of paragraphs, sectioning commands and figures etc. as marginpars or similar in the PDF, so that they appear on a ...
11
votes
2answers
567 views
19 simple tables giving “TeX capacity exceeded” / “Too many unprocessed floats”?
When I added a couple of rather unremarkable tables to my document, it stopped compiling (using pdflatex):
"TeX capacity exceeded (main memory)"
I searched the web a bit (well, actually, mostly ...
11
votes
1answer
7k views
How to change the spacing between figures/tables and text?
I was wondering if there is any way to lessen the spaces between figures and text. In my paper I have a lot of figures (graphics) and it is inconvenient for me to have default (large) spaces between ...
6
votes
2answers
6k views
How to remove figure label?
I'm using floatrow package to organise my figures, but then would like to add an image in the preliminary chapters which should NOT contain figure label e.g. Figure 1, but only the caption To my ...
21
votes
3answers
1k views
Tables below footnotes, is this a good output routine algorithm or a bug?
Consider the minimal code below, which produces two different layouts depending on the table position marks.
The first layout uses
\begin{table}
which results in the table ending below the ...
3
votes
3answers
635 views
Create caption without float AND without caption-package?
In the appendix of my thesis, there is a large number of tables and longtables which does not need to float, as they shall appear one after the other just how they fit on the pages (and it is no ...
12
votes
1answer
1k views
Adding word 'Table' before each entry in list of tables
I need to prefix each entry in list of tables and figures with appropriate text - table or figure for each. Also I need to remove chapter numbers from list, because tables are numbered consequently ...
17
votes
2answers
2k views
Margin Figures/Captions
I have two figure/caption related questions.
Firstly, in many textbooks, it is customary to put thin figures (along with their captions) entirely in the outer margin of the page. What is the most ...
30
votes
7answers
19k views
Using \footnote in a figure's \caption
Maybe this is an easy one, but I struggled with this now too long :)
I want to have a footnote in a caption of a figure, see the example.
\begin{figure}[!ht]
\caption{a figure ...
8
votes
4answers
36k views
LaTeX figures side by side [duplicate]
Possible Duplicate:
Two figures side by side
I want to place 2 images side by side in LaTeX. I have 2 .png files and I don't understand how to do it in LaTeX. I have tried many ways but ...
12
votes
3answers
4k views
When do I need invoke \clearpage manually?
I am not sure whether invoking \clearpage is necessary or redundant at many places in my input .tex files.
Here I will ask you, in what condition is invoking \clearpage necessary?
I hope I get a ...
4
votes
2answers
765 views
How to create multilevel figure / table numbers?
How to create figure numbers like 1.1.1 and then 1.2.1, not 1.2.2?
I mean even if I added \arabic{section} into the command, the order of figures is still continuous, not accordingly rearranged by ...
6
votes
2answers
575 views
Help aligning tables.
I need to align 1 table to the right and two to the left,
the layout I want to achieve is something like this:
\begin{figure}
\centering
\subfloat[]{%
\begin{tabular}[b]{cc}
\hline
0 ...
5
votes
1answer
3k views
Algorithm over 2 pages
I am writing a few rather large pseudocode functions using algorithm and algorithmic, i.e. my code looks something like:
\begin{algorithm}
\caption{Coolest Algorithm ever} ...
3
votes
1answer
439 views
Is it possible to use the figure environment with the standalone package?
I can not get standalone to work with figures; I get the error Not in outer par mode.
(The figure is in the included file.)
1
vote
1answer
1k views
Put a figure with a table side by side
I have a table and a figure, I want to align them one next to the other (not one under the other):
\documentclass{llncs}
\usepackage{capt-of}
\usepackage[demo]{graphicx}
\begin{document}
...
13
votes
2answers
732 views
\intextsep gives doubled space
If a float (black box) follows my {example} environment (gray left line) the skip between them is too big. I guess it’s twice \baselineskip but it should be only one \baselineskip plus some glue. It ...
3
votes
1answer
697 views
longtabu and floats: wrong table breaks on pages with floats
I noticed that the tabu package seems to have problems with its longtabu environment, if it is placed on a page, where a float already is placed.
Consider the following MWE:
...
17
votes
2answers
10k views
Changing the font size in a table
What's the recommend way of changing the font size in a particular table? Is there a better way than enclosing all values with, for example, the \tiny function.
15
votes
1answer
11k views
`h' float specifier changed to `ht' warning when not attempting to specify a float
I'm new to LaTeX and trying to understand the reason why I'm getting the warning:
`h' float specifier changed to `ht'
I'm not attempting to change the float property of anything - the warning is ...
8
votes
3answers
4k views
How can I center all tables in a document?
Background
Would like to center all tables within floats, without having to add \centering to each table.
Ideas
Tried the following:
\let\originaltabular\tabular
...
16
votes
3answers
342 views
What is the exact purpose of \ftype@<TYPE>?
I currently working on some float related code an saw that the standard float environments figure and table define (beside others) the macros \def\ftype@figure{1} and \def\ftype@table{2}.
The LaTeX ...
15
votes
2answers
2k views
Code spanning over two pages with minted, inside listing with caption
I am trying using minted to display some code in my document, but the code is long and spans over two pages, this works fine, however when I place my code inside
\begin{listing}
...
14
votes
2answers
305 views
Image inside another image
I currently have some LaTeX code to have multiple images side by side:
\begin{figure*}
\begin{center}
\includegraphics[height=2cm]{foo11.jpg}
\includegraphics[height=2cm]{foo12.jpg}\\
...
