2
votes
1answer
29 views

Same style (eg., Bt Charter, no bold style) between chapter/section/etc and ToC/LoF/LoT

I recently noticed the difference between the chapter/section/subsection font style and those in ToC, and also the style in LoF and LoT, it seems that bold style is dominant in the latter. What is the ...
3
votes
1answer
73 views

Report custom format

I'm new to LaTeX and I want create a report for my college. The format specified is as follows: Left Margin – 1.5 inch Right Margin - 0.5 inch Top Margin – 1 inch Bottom Margin – 1 inch ...
1
vote
3answers
67 views

How can I format a special section title? [duplicate]

I want to make my section titles look like the ones in this figure. However I have no idea what font that is, or how to only change the font for the tiles and sections etc. or how to get the fancy ...
3
votes
0answers
140 views

How to use LaTeX fonts to format the text? [closed]

Are there fonts in LaTeX equivalent to those of Microsoft Office ("Times New Romans, Veranda, Courrier ... ") ? If yes, how can we use them ? Which package contains them?
4
votes
2answers
72 views

Change Verbatim Font To PCR

I'm writing a document using LaTeX, and I would like to use the PCR font inside of a verbatim block. This question is almost identical to mine, but when I try to apply it to use PCR, I can't get it ...
4
votes
1answer
57 views

Small caps in section but not in ToC

With LaTeX, I would like to set all my section titles in small capitals but I need the \textsc to be 'cancelled' in my table of content. Is that possible somehow ? I currently do this : ...
1
vote
0answers
47 views

How can I make text inside set notation look like normal text?

I'm very new to LaTeX, and have never been very good with computers, so apologies for not knowing how to post questions on here properly or missing out anything important. I have this: ...
2
votes
2answers
180 views

Problem with the \mathbf command

In this MWE, I want to obtain bold letter for the letter "H" (compare the two "H") : \documentclass[10 pt]{beamer} \usetheme{default} \usepackage{lmodern} % load a font with all the characters ...
3
votes
2answers
106 views

reducing space taken by big math equation

i hve few big equation in my file and they take lot of space. plase help me in reducing their size.i have already tried using \declaremathsizes but it only reduces math font size nt the space it ...
0
votes
1answer
59 views

standard or recommended font for vocabulary or gloss terms

I'm writing notes for my students and in the present section, the bulk of the content is defining terms. To help make the notes more practical, I put the technical terms being defined in bold so that ...
3
votes
1answer
172 views

Debugging font shape undefined in TeXShop

I am a LaTeX newbie on a Mac running OS X Mavericks, TexShop 3.26 and MacTeX-2013. I am writing a document and I keep getting the following warning: LaTeX Font Warning: Font shape `T1/phvr/m/n' ...
0
votes
0answers
26 views

How can I change font? [duplicate]

How can I change font just only for one word ? I have to use Segoe WP Semibold for some words in my document.
2
votes
1answer
36 views

Changing output font style of a referred label

In of the bulleted list of my MWE below, I'd like the label ("Item a") to be of bold font weight, the output of \ref{itm:one} to be in normal font weight. Unfortunately, neither the placement of ...
6
votes
1answer
72 views

Font formatting order

I want to set my chapterprefix font for scrbook class. This is what I want to do: \setkomafont{chapterprefix}{\centering\Huge\rmfamily\mdseries\scshape} However, as I was writting it, I asked ...
2
votes
1answer
6k views

How to set document font to times new roman by command

I wanted to know how to set font of a document to Times New Roman and size to 12 for text and for Chapter Heading 14 only, for the whole document. I don't want to use the fontspec package for this. ...
10
votes
1answer
372 views

How can I mimic Griffiths' electrodynamics textbook?

This is such a beautiful textbook; very dear to me. I think it has a great font - which I know is Times New Roman. But somehow, I can't even get close to it. One of the main obstacles is making the ...
12
votes
1answer
926 views

Realistic handwritten document

Is there a template/package that generates realistic handwritten documents? The font should preferably reflect an average handwritting (readable). Letters would follow a handwritting style but would ...
3
votes
1answer
60 views

Different font for small caps in Descriptionitem Label

For my Bachelorthesis I defined a new kind of item to use it with the description environment. \newcommand{\tfactor}[5][Event]{% \item[\textsc{Faktor -- #1 -- #2 }]\hfill\textbf{#3} \\% ...
1
vote
1answer
114 views

How count a space betwen glyph (without glue)

How do I count width of glyph, and the space between glyphs? I have: font word How to get all information about the space between glyph. "Test." in font "Times New Roman". I need get: width "T" ...
12
votes
1answer
390 views

How do I enter ὅπερ ἔδει δεῖξαι in TeX?

How do I typeset this statement if I'm using \usepackage[default]{frcursive} and \usepackage[T1]{fontenc} in my TEX file?
5
votes
3answers
603 views

Use sans-serif in a verbatim environment?

What is the right way get fancyvrb’s verbatim environment (or any other variation) to use \textsf as the font? I can do it with: \begin{Verbatim}[commandchars=\\\{\}] \textsf{Here’s some textsf.} ...
5
votes
1answer
227 views

format special words in text

Is it possible and furthermore constructive to make LaTeX automatically format specific words in specific way? Let's say, for example, I'd like to have every occurrence of the word "hello" in a bold ...
0
votes
1answer
290 views

How to change the font of URL in the bibliography [duplicate]

When using the natbib package the URLs are printed and formatted in the bibliography in a different font from the rest of the document which looks nasty i.e. monospace Typewriter. I am having ...
2
votes
1answer
65 views

Customize how the reference numbers appear in the bibliography when using biblatex?

I wish to customize the font for when printing the reference numbers (the to the left of all references, commonly surrounded by brackets) in the biblatex package. I hope that there is some command ...
3
votes
2answers
307 views

LaTeX Capabilities: Complicated and Important Equations

As I am introducing LaTeX to an audience, I'd like to show how it can render equations beautifully. As such, I'd like one equation (math/physics) that combines many different formatting requirements, ...
2
votes
3answers
262 views

Correct uniform font formatting for included graphics

Uniform Font Formatting for Included Graphics as in the Rest of the Text This question is not about vector or raster imagery, but about the application of uniform font in the entire file including ...
3
votes
1answer
1k views

Using \scshape and \bfseries together

A very obvious one I suspect, but when I try to do the following the small caps are over-ruled by the boldface, so I get lowercase rhubarb rhubarb. Is there an easy way to get \scshape\bfseries? ...
0
votes
2answers
156 views

How do I make frame environment play nice with \textbf?

I am getting a strange error message when I put textbf into a frame environment. Minimal Example \documentclass{article} \listfiles \begin{document} \begin{frame} \textbf{Lemma 1} \end{frame} ...
16
votes
3answers
664 views

Conflict between microtype, LuaLaTeX, and otf fonts when typesetting material in small-caps

I'm using the microtype package (microtype beta 2.5 build 08) to modify my document and I'd like to retain its functionality across all font shapes with the exception of small-caps (\scshape). How do ...
3
votes
0answers
9k views

Where should I use \textsc? [closed]

When should I use macro \textsc ? What is common practice in document like diploma thesis? Should I use it for names of persons, names of described entities of particular interest or in some other ...
2
votes
2answers
1k views

Set default Koma script font to Times [duplicate]

Possible Duplicate: KOMA-Script: change font of sectioning headings to serif I am using scrbook document class but want to change the default font to Times. However when I add: ...
2
votes
0answers
326 views

Is it Possible to Obtain Rudin-Style LaTeX Document Format? [closed]

I'm trying to obtain some format settings (or copyable code) for LaTeX documents. Above is a screenshot of Walter Rudin's Principles of Mathematical Analysis (a book I'm sure many people here have ...
1
vote
1answer
462 views

Using a new environment to make a title bold, large, in a different font, and red [closed]

I have what I thought was a simple thing to do in latex. I need to take several titles and make them LARGE,bold face,in Bookman font, and red in colour. Is the easiest way to accomplish this to use a ...
2
votes
1answer
265 views

LaTeX like Math.SE

I quite like how the Mathematics Stackexchange site's LaTeX looks, and I know that they have a LaTeX functionality by running MathJax on the site. What fonts/packages are available to achieve this ...
5
votes
2answers
175 views

Break after arrow

The length of formula in attached code is getting too long, I would wish to break it short. I try to insert a break after the \rightsquigarrow by failed. How should I insert a break? ...
4
votes
1answer
1k views

Using \emph in a Tikz \tikzstyle environment

very new to latex and Tikz. This is my first question on Tex (or any site) so apologies in advance for any mistakes or discourtesies. I'm trying to put together a process flow graphic using the code ...
5
votes
3answers
317 views

Citation within caption => avoid italics (biblatex)

In my document, the captions are set in italics. I use a customized biblatex author/year citation style. If I \cite within a caption, the citation is set in italics as well. How can I avoid that?
2
votes
1answer
1k views

Changing theorem/lemma… label to bold italics

For theorems in my contribution I use \theoremstyle{plain}. This style prints theorem label in bold italics, eg. 'Theorem 1.', which is followed by text in italics. How could I set 'Theorem 1.' to ...
4
votes
2answers
3k views

Changing the subfigure caption by removing brackets & font of the subcaption

Note that by using \usepackage[bf]{subfigure} I'm able to change the label of the subfigure to be boldface. However, the label appears with brackets, e.g., "(a)". How could I get a subfigure label ...
8
votes
1answer
148 views

Why two forms for annotating style of text?

When I want text to be large I say: {\Large lorem} When I want text to be bold I say: \textbf{lorem} Why the inconsistency? What's the implementation detail or philosophy behind these two ...
14
votes
1answer
12k views

All letters in uppercase, but the first letter bigger than the other ones

I want to know how can I achieve this effect in LaTeX: Basically it looks like this: {F}IRST {L}ETTER, where the letters in the braces are a little bigger than the other ones but they all the ...
0
votes
1answer
183 views

How do I replicate CSPlib's Latex logo?

In the CSPLib paper, they use a special kind of formatting for their logo. What is the best way of replicating that logo?
4
votes
1answer
2k views

Italic in some words of the title

I want to use a title with a foreign word, which should be in italic. I use KOMA-script. I tried this: \documentclass{scrartcl} \begin{document} \tableofcontents The text. \section{Foo ...
7
votes
1answer
89 views

Detect markers in macro arguments

I'd like to find a way to define a command which would work like this \mycommand{This +is+ a +simple example+.} and give This is a simple example. i.e a command which looks for words ...
4
votes
1answer
532 views

textbf+UpperCase title

I would like to make a section title UpperCase+textbf, however, while trying to define it like this \makeatletter \renewcommand{\section}{ \@startsection {section}{1}{0mm} ...
5
votes
1answer
4k views

Make a LaTeX document look like it was written in Microsoft Word [duplicate]

Possible Duplicate: Making a LaTeX document appear as though it were typeset in MS Word I know this is a travesty in the world of TeX, and an affront to all decent TeX-believing people out ...
4
votes
1answer
4k views

Synonyms for \bfseries and \itshape and such?

Seeing as it is quite confusing for non-TeX expert to know how to specify italic or bold font, and the names such as \bfseries are not straightforward... Is there a package that defines synonyms like ...
20
votes
4answers
3k views

How to make the optional title of a theorem bold with amsthm?

I use the code mentioned in Title of the theorem: \begin{theorem}[The title] Some statement \end{theorem} However with amsthm the optional title -- above: "The title" -- is neither bold nor italic, ...
3
votes
0answers
118 views

sansmath and boldmath--mutually exclusive? [duplicate]

Possible Duplicate: Make mathfont respect the surrounding family This question is similar to the Bold, italic math (\bm) and sansmath question, but with a few more requirements. I am ...
16
votes
3answers
2k views

Making a LaTeX document appear as though it were typeset in MS Word

I am typesetting a document in LaTeX for which I have been given exact specifications that are intended for an MS Word-processed document (single-sided, single-spaced, 0.75 inch margins, no more than ...