Tagged Questions
5
votes
1answer
33 views
How do I prevent \cellcolor from over effect of \hline
I'm trying to add HTML code based color to my table, like so:
\usepackage[table]{xcolor}
\begin{tabular}{ |>{\columncolor[HTML]{F2FAF8}}c| p{11cm} |}
\hline
CELL 1 & CELL 2\\ \hline
CELL ...
4
votes
1answer
28 views
Slashbox with tables: Adjusting the diagonal separator for multiple rows
I am using the slashbox package in a table as shown next. However as you can see, the diagonal line in the first cell is not the real diagonal of that cell. This is because of the existence of more ...
2
votes
1answer
83 views
Default Table Style [duplicate]
How can I create a default table style, which remains throughout the course of my document, lets say, for example, I want grid-lines and a gray shading behind the header-row, without having to ...
1
vote
2answers
32 views
Table doesn't fit to page width properly
The table produced by this code always goes out off the width of my page. I want the table to fit within the width of the page. I tried giving extra \\ in between but it made it worse only.
...
5
votes
1answer
117 views
Making advanced tables [duplicate]
I am trying to generate tables like the one above I found in a textbook in LaTeX.
In particular I am trying to find a way to make that $\$ slash symbol in the left upper corner. It would also be ...
5
votes
2answers
184 views
Format time span for CV
I would like to add the month to the time span of moderncv. I order not to occupy much more space and still having a beautiful solution, I would like to do the following:
Year - Year
Month - Month
...
3
votes
0answers
60 views
How can I create a table that spans across the width of two vertical (and opposite) A4 pages?
I have a large (wide) table to typeset. I usually use the code below for my tables which enables me to specify the width of each column in the table.
However, it is up to me to make sure that the sum ...
2
votes
1answer
41 views
Fixing alignment with the rest of the text
The image included above is what I want to replicate - I want the name to appear on the top left, and the address/email-id to appear on the top right, and I want both of them to be aligned with the ...
7
votes
2answers
115 views
Making a lattice with numbers on vertices
Anyone who is familiar with the problem of counting up/right going paths in a rectangle from bottom left corner to upper right corner knows that one way of doing this is doing it by recursion. I want ...
2
votes
1answer
48 views
Formatting a conditional table of coefficients in LaTeX
I'm totally blanking on how to format this, or even what to use as a search term to see if anyone has asked about it before. I would like to make a conditional table of coefficients (ie. two tables ...
1
vote
1answer
75 views
How To Fill Leftover Space
I am making a fairly space intensive LaTeX "cheat sheet." Right now, I have added a single table, as so:
However, there is a large gap to the right of this table that I would like to fill with a ...
4
votes
1answer
57 views
Building chemical “ICE” tables with tabular environment
I am starting to write my chemistry lab reports out in LaTeX, but keep getting stuck on the "ICE" tables (see the LaTeX example below).
I can't figure out how to get the + and \rightleftharpoons in ...
1
vote
2answers
93 views
Tables together
I want to put the following table together with a other similar table in two columns
\begin{table}[h]
\centering
{\fontfamily{ptm}\selectfont{
\rowcolors{1}{}{gray!20}
\begin{tabular}{cc}
...
5
votes
2answers
133 views
tabular numbers in tables, proportional in text
I'm using LuaTeX with a font that has proportional, lining and tabular numbers available.
Is it possible to set things up so tables automatically use tabular numbers - but proportional numbers are ...
3
votes
2answers
204 views
importing latex table code into lyx
I create tables in a spreadsheet program, convert them to latex code and then use an ERT to import into my lyx document. When I paste the latex code the entire thing turns out very ugly looking. The ...
0
votes
1answer
135 views
Setting single row height with multirow
I have a table in LyX document. And I'm using multirow to span text across multiple rows. For example I might want the text to span across 2 rows, the problem occurs when it doesn't fit, then it just ...
2
votes
3answers
83 views
format two tables inside a figure
I have a figure that contains two tables, I would like to give format to them.
What would be the best option?
{\footnotesize\begin{figure} [h!tb]
\centering
\begin{tabular} {l }
\hline
...
3
votes
1answer
82 views
How to create a table format of 81 columns which can fit into one page?
I want to create a table of 81 columns in landscaped mode, tiny font is ok. I changed the \documentclass to landscape, however the font was still too big to fit in. Any suggestion or idea would be ...
7
votes
1answer
67 views
Make numbers in table bold w/o changing width
I want to highlight some numbers in a table using \bf{}. However, the bold numbers also get wider but I want them to neatly line up with the rest. How can I avoid this?
4
votes
3answers
112 views
Changing the header row style of a table to discriminate it from other records
I wanted to change the header of table to discriminate it from other records. It can be changing bounding box or font or what ever it is usual.
\begin{table}
\centering
...
2
votes
0answers
96 views
Pgfplotstable converting zeros to — in a knitr inline table
how do I change each 0.0 to -- without having to reference each as string type or making the whole table string type? The actual table is quite long and it would take too long to do it manually. For ...
5
votes
3answers
141 views
Problems aligning on a decimal in a table with colored rows
I'm having a problem with making a "pretty" table
The intent is to have alternating light background colors with black text for normal rows to facilitate reading across, with the header having a blue ...
4
votes
3answers
148 views
How can I draw a table where the upper left corner is missing? (Pic)
Is it possible to draw a table like the one in the attached picture? I've read documentation on the tabular environment but nothing really describes this well.
The shading would be nice but the ...
3
votes
3answers
208 views
Bold one cell in table using CSV reader
Is it possible to bold a single desired cell (or number of cells) using csvreader (besides the head)? Here is an example of making the table.
\documentclass{article}
\usepackage{csvsimple}
% Make ...
8
votes
1answer
191 views
Reformatting LaTeX code after excel2latex
I use excel2latex to generate tables from Excel. The issue is that excel2latex generates really horribly formatted code with extra spaces, misaligned, etc. Does anyone have another solution to ...
4
votes
1answer
155 views
How to align \vrule partial vertical lines in a pgfplotstable
I had a look at this post on Misaligned multicolumn but it doesn't really solve my problem. I have the code below which is supposed to produce a table with a blue line for the first row and red lines ...
5
votes
3answers
169 views
Making tables more prominent
I am working on a long LaTeX document with several tables, which contain mainly text, or text and numbers. The tables are a \begin{table} ... \begin{tabular} environment. It is often difficult to see ...
3
votes
1answer
166 views
pgfplotstable selecting numeric columns or multiple columns by index
Hi two questions in one:
I haven't been able to figure out the answer from the manual: I have a table of data with strings in the first column:
I'd like to apply some key-values (e.g. fonts by ...
5
votes
1answer
139 views
Generate box with content in header
Halo everyone, I intend to create the one as shown in the attached photo as the header of my document using TeX but I can't seem to get it right. Either my box are distorted or they can't be balance ...
6
votes
1answer
117 views
Row with invisible cells
Is there any easy way to obtain something like this in LaTeX?
My guess was to try to make the first and third cell of the first row invisible, but then I lose the right and left border of the Main ...
4
votes
1answer
183 views
Multi line header for pgfplotstable
I have a dataset in csv file format that I'm loading into pgfplotstable. I can't change the format of the original csv, and being financial data it has a column of item names and two or three ...
2
votes
1answer
201 views
How to change Cell Height of table and control hline
I have a need to create a table, I have shown a MWE, its producing the table with the text I want. I have two question relating to the attached image.
How to change the height of cells.
How to ...
1
vote
1answer
156 views
How to represent a data set in latex?
I have below data.I would like to upload into latex doc in the below format.
Length Left Right Bottom Top Diagonal
214.8 131.0 131.1 9.0 9.7 141.0
214.6 129.7 129.7 8.1 9.5 141.7
214.8 129.7 129.7 ...
2
votes
1answer
85 views
Creating table of images and only one col having one picture to span all rows
I am just adding lots of images into latex and although I know how to apply images to a table, this one is slightly tricker.
I have two columns. The first needs a single image which spans all rows, ...
11
votes
2answers
360 views
Non-trivial table in LaTeX
I want to convert this OO table into latex:
This is what I have so far:
\begin{table}
\begin{center}
\begin{tabular}{|c|c|c|c|c|c|c|} %p{4cm}
\hline
\multicolumn{7}{|c|}{Czas ...
10
votes
2answers
811 views
How to Create Comparison Tables in LaTeX?
I am a new user (both to LaTeX & this forum).
I want to create a Comparison Table for an Article (like the one shown here):
Can someone please help me with this.
11
votes
3answers
682 views
Reusing LaTeX code to achieve a consistent layout
What is the best approach to reusing the same layout for numerous tables, paragraphs etc. which share the same structure but different content? Is the best method to use custom commands/macros?
2
votes
1answer
66 views
Placing a .pdf file in the center with \multirow
The following is my code
\begin{sidewaysfigure}
\centering
\scalebox{0.9}{\begin{tabular}{c|c|cc}
\emph{}&\emph{a}&\emph{b}&\emph{c}\\
\hline
\rotatebox{90}{text}&\multirow{2}{*}{
...
3
votes
1answer
879 views
Making scientific table with AASTex package - is there a better option?
I really like the formatting of tables offered by the AASTex package.
AASTex Generator
But it is not quite what I need in terms of flexibility.
Here is some code for a table I am making. I don't ...
5
votes
1answer
103 views
A bit larger spread between rows of a 2x2 table
The following is my expression:
\begin{equation}
\left[
\begin{tabular}{c|c}
$y$ & $a_{bc}$ \\
\hline
$a_{ab}^T$ & $y$
\end{tabular}
\right].
\end{equation}
Note ...
11
votes
2answers
158 views
Is there such thing as “p{height}”
I am making a table right now and it's really annoying that items in my cell are getting crunched
\begin{center}
\begin{tabular}{|c| c | c|}
Critical Points $P_0$ & $f(P_0)$ & Conclusion \\
...
5
votes
2answers
480 views
How to make caption bold in ctable?
If I use
\ctable[caption = \textbf{something}]{}{}{}
the text inside the caption is bold but TABLE 1. is not ... It looks like this:
TABLE 1: something
and i would like
TABLE 1: something
...
2
votes
1answer
183 views
Vertical justification and getting rid of extra line segments (in the first cell)
I am working on a table.
My problem is that the text in the column "Type" for instance is not vertical justified. In addition I have an extra line segment at the bottom of the very first cell.
...
4
votes
2answers
438 views
siunitx rounding in table with parentheses
I'm trying to create a standard regression table with standard errors in parentheses below the coefficients, while using siunitx to align the numbers on the decimal point, and to round the numbers.
...
2
votes
1answer
727 views
Format nomencl in table style
For my thesis I wwant to format the nomencl in the same style as the rest. Simply put this means I want the nomencl to appear as follows:
Symbol Quantity Unit
t Time s
rest ...
14
votes
2answers
6k views
Math inside tables and formatting
I'm trying to make a little summary of mathematic analysis, useful for my university, in LaTeX. I'm stuck in the problem of creating nice table, with alternate colouring containing equations with ...
5
votes
2answers
541 views
How to create attendance sheets?
Is there a package for creating sheets you fill out by handwriting?
Like for example attendance sheets, a list of key borrowers, a sign-off sheet for dangerous stuff etc.
Basically some sort of ...
2
votes
1answer
299 views
Siunitx: alignment, parentheses and font size
I'm trying to align numbers (that are bolded, between parentheses, etc.) by decimal points in table columns while using the auto-round option of the siunitx package. The following code doesn't work:
...
8
votes
2answers
403 views
Four Language Parallel Column Book
I am trying to format a four column parallel text in four different languages to display on two pages with two columns per page.
I have tried using ledpar and parallels but I cannot get it to work. ...
1
vote
1answer
238 views
siunitx - Decimal points not present
Trying to use siunitx to make my columns look all nice and so such. However, The decimal points are absent...
Example:
Code:
\documentclass[letterpaper,twoside,12pt]{article}
%%% PACKAGES
...
