1
vote
1answer
28 views

Glossary list without page number and acronym links to glossary

As the title says I only wish to remove the page numbers not the acronym links to the glossary. Using package option nonumberlist the numbers are removed but so are the links. This code below ...
0
votes
0answers
31 views

How can I add in the missing space when the first use of an acronym is plural?

I'm using the glossaries package and defining my acronyms like this: \newacronym{led}{LED}{Light Emitting Diode} I'm then using the acronyms in my document with either \gls{led} or \glspl{led} ...
3
votes
1answer
16 views

Glossaries/acronyms list is not ordered properly

I'm using packet glossaries and I have the following acronym list: \newacronym{AI}{AI}{Ambient Intelligence} % \newacronym{CRL}{CRL}{Certificate Revocation List} % \newacronym{ETSI}{ETSI}{European ...
2
votes
0answers
19 views

How to display acronyms by order of appearance in the glossaries package?

In the code below, I want the acronyms to be displayed by order of appearance in the body in the list of acronyms and the glossaries in alphabetic order at the end of the book. When I use the option ...
0
votes
0answers
24 views

Glossaries: customize number lists (page numbers) attached to each acronym

I would like to exclude the Table of Contents and Glossary itself from the page numbers that appear attached to each acronym indicating the pages where the entries have been used. If this cannot be ...
4
votes
1answer
36 views

Issue with acronym being only a math mode symbol in glossaries with xindy

I am using glossaries package to create a list of abbreviations. I need to use xindy because otherwise the character \"{o} breaks an acronym by being in the definition (and it sorts them better). ...
2
votes
1answer
65 views

custom plural for the short form of an acronym using glossaries

I'm using glossaries and would like to use a custom short form plural (it should be the same as the short form singular). I've tried using \glsshortpluralkey, but this only affects how the short form ...
1
vote
2answers
54 views

Glossaries Package: No long form the first time using an acronym

Every time an acronym is used for the first time, the glossaries package (GP) includes the long form in the text. I don't want GP to do that (the abbreviations are clear/they can be looked up in the ...
2
votes
0answers
25 views

Force printing of all Acronyms, even those that have NOT been mentioned in the text [duplicate]

Several acronyms that are not used (but are defined in the Acronym file) in my text are not shown in the List of Acronyms. How can I print all acronyms even if they are not used in the text. You can ...
2
votes
1answer
169 views

Using Arara on windows in Texstudio to generate glossaries

I am trying to generate glossaries in my LaTeX document using the article class and am using TeXStudio I used the below code but nothing gets printed \documentclass{article} \usepackage{titlesec} ...
3
votes
1answer
81 views

Acronym capitalization not working in plural mode

I am using the glossaries package to manage acronyms and it seems like the combination of "use long form", "make first letter uppercase" and "use plural form" does not work (see MWP below): At first ...
3
votes
1answer
209 views

Hyphenation with Acronyms

I have difficulties getting hyphenation right in long acronyms with user-defined hyphenation rules when trying to prevent line breaks between the long and the short form. \documentclass{article} ...
3
votes
2answers
105 views

Extra “Contents”, “Glossary” and “Acronyms” pages, when using \usepackage[acronym]{glossary}

I'm currently playing around with the LaTeX template for my thesis, but am at a loss as to why extra pages appear between the generated "Contents", "Glossary" and "Acronyms" lists? Is this a problem ...
3
votes
1answer
48 views

cross-referencing acronyms not displayed in the text with

I use glossaries and define besides standard acronyms also some acronyms like this: \documentclass{scrreprt} \usepackage{xcolor} \definecolor{navy}{RGB}{0,0,128} \usepackage[ngerman]{babel} ...
2
votes
1answer
111 views

glossaries acronyms description in brackets

I use the package \usepackage[acronym,toc]{glossaries} In the text I write my acronyms usually via \gls{Acr}, \acrshort{Acr} or \acrlong{Acr} This displays my acronyms like: Acronymdescription ...
6
votes
1answer
60 views

Include custom text in glossary

I'd like to include a disclaimer like "This list of acronyms only specifies the most important ones" underneath the caption of the acronym page. I'm currently inserting the page using ...
4
votes
1answer
127 views

Different style for acronyms

In 1 I had the answer on how to put the translation of an acronym and used both English and Spanish version. The issue now is that I have acronyms that are only Spanish, others only English without ...
0
votes
0answers
37 views

Use both Acronym and Glossary for one term

I want to specify both the acronym meaning and the glossary description for some acronyms. For examples I need to specify what's description of API, and also what acronym mean for it. Is there a ...
1
vote
1answer
228 views

Acronyms & Glossaries not being output in the PDF

I've used glossaries in the past running latest MikTex and Texniccenter on Windows 8.1 and now after 2 year I started to write a new paper using my old template and I got stuck using the glossaries. ...
5
votes
2answers
136 views

glossaries: display the page number but not the current page

I have been looking around the web for a few days for this problem, but I can't find a solution. I created a glossary for my thesis and when I display it I see the current page number at the end of ...
4
votes
1answer
79 views

Do not display one special acronym in list of acronyms without using glossaries

This post does what I want with the glossaries package that I would rather not use. Is it possible to have the same (selectively say please do not put this item in the acronym list) using only the ...
4
votes
1answer
96 views

How do I sort two glossaries differently? list of acronyms(sort=standard) and list of symbols(sort=use)

I'm using the glossaries package to create a list of acronyms and a list of symbols. I have to do a list of acronyms sorted alphabetically(sort=standard) and a list of symbols ordered by ...
6
votes
3answers
117 views

parenthesis surrounding an acronym printed in list of acronyms of the glossaries package

I encounter the following problem when using the glossaries package. In order to explain this, please consider the following (minimal) example: \documentclass{article} %or book etc ...
3
votes
1answer
162 views

Using uppercase command for acronyms in Glossary

I often use the term range expansion in a text. Thus I'd like to abbreviate it using RE. When it first occurs in a chapter, The abbreviation should be expalained like this: Range expansion (RE). In my ...
5
votes
1answer
206 views

How to print acronyms of glossaries into a table?

for now I am using a tabularx table to print acronyms manually. But I want to use the style of my table with glossaries and acronyms: \printglossary[type=\acronymtype,style=mystyle] The table so far: ...
2
votes
1answer
165 views

Simplify LaTeX document to satisfy editing office

I have a LaTeX manuscript prepared using a publisher class file (agutex) where I've used four packages (booktabs, glossaries, siunitx, graphicx). I use glossaries in particular for acronyms. After ...
4
votes
1answer
174 views

Use of longplural, shortplural in CustomAcronymFields

I'd like to have the first occurrence of my acronyms in emphasized style. So, I redefined CustomAcronymFields and use SetCustomStyle, as suggested by the FAQ. This worked til I needed a special ...
3
votes
1answer
215 views

acronym option passed at the class level rather than to the (glossaries) package level doesn't work

I was pretty sure that options (including unknown ones) passed at the class level were also passed to the loaded packages. Hence I don't understand why the following MCE works like a charm: ...
4
votes
1answer
137 views

Glossaries: Hyperlink to First Entry not List of Acronyms

Is it possible to direct the hyperlink created by \gls{term} to the first use of the term in the main text instead of the glossary list? I'm writing a thesis that uses a lot of abbreviations, but I ...
3
votes
1answer
243 views

Glossaries acronyms two languages

I'm using glossaries package to make my list of acronyms. I'm writing in Spanish but some of my acronyms are in English. I want them to be displayed like: Spanish description - English long (Short) - ...
1
vote
0answers
194 views

Glossaries not displaying list

\documentclass[a4paper,11pt]{article} \usepackage[utf8]{inputenc} \usepackage[italian,english]{babel} \usepackage[T1]{fontenc} \usepackage[unicode,colorlinks=true]{hyperref} ...
4
votes
1answer
61 views

How to suppress certain defined entries from appearing in the acronym list using glossaries package?

Really impressed by the extensive potential of glossaries package by Nicola L.C. Talbot to manage different types of glossaries in a generic approach, however I tried to look for this feature in the ...
3
votes
1answer
87 views

reference a glossaries text in an acronym, sanitization and fragile commands

First post so be nice. This doesn't appear to be a duplicate but maybe I am not putting in the right keywords. I am trying to have an acronym description just be the text of a glossary item (using ...
5
votes
1answer
107 views

Symbol in plural form of acronym in glossaries package

Follow-up question If the plural form acronym is used first then it is printing one s after the symbol in parenthesis and this is not desired. For example, if \glspl{a} occurs first before any use of ...
5
votes
1answer
70 views

Redefine acronym look in document

I would like to redefine the way acronym looks when I use \acrfull macro. Now it shows meaning of acronym and then abbreviation in brackets, but I would like it to show the opposite way - abbreviation ...
6
votes
1answer
99 views

Cyrillic in glossary/acronym entry

I want to define acronyms and terms in Bulgarian. Unfortunately, when I do so, LaTeX gives a whole lot of errors and do not compile. Anything to help? \documentclass[a4paper,10pt]{article} ...
8
votes
1answer
236 views

Using a footnote in the full name of an acronym

I would like to use a footnote in the full name of an acronym. Here is the minimal (not) working example: \documentclass{report} \usepackage{acronym} \usepackage{footnote} \begin{document} ...
2
votes
1answer
264 views

Separate the list of acronyms in the glossary (glossaries)

In my thesis I would like to enter a list of acronyms and a glossary. I'm trying to do with the package glossaries. However, I meet a problem in separating the first from the second. If I use the ...
3
votes
2answers
366 views

How do I remove alphabetical grouping of acronyms in the list?

I would like an acronym list with equal vertical space between each acronym. My list is grouping acronyms that start with the same letter. How is this avoided? Here is the code for a MWE with this ...
2
votes
1answer
169 views

Defined \acronymname is not used in toc, but the standard “Acronyms”, why?

I have defined a new name for my Acronyms list, but it the default name ("Acronyms") is used in the table of contents. Do you know how I can solve this? I have created a minimum working example, but ...
2
votes
1answer
82 views

How to remove an entry location for a particular reference of the glossary term?

I'm using a custom command \addacronym which creates two glossary entries for each acronym: the main entry and a cross-reference from the abbreviation to the main entry. I also had to redefine the ...
3
votes
1answer
224 views

Redefine the style of acronyms (glossaries)

In a paper I'm writing I would like to enter a list of acronyms used, and I'm trying to do with the use of glossaries package. The problem is the style in which they appear acronyms. A compilable code ...
3
votes
2answers
118 views

Using bi-lingual entries with the glossaries package

I'm writing my PhD thesis in my mother language (Slovene). I would like to create a Glossary that would contain the slovene versions of the terms along with their english counterparts. The ...
0
votes
1answer
135 views

Change appearance of first acronym use if it falls into a composed word

I have a acronym for GPU, and start my text with GPU-computing. For now this is the first appearance, and this results in graphic processing unit (GPU)-computing, however I would rather like it to ...
7
votes
2answers
278 views

Glossaries package: small caps in body and normal caps in the acronym list

I want a list of acornyms to be printed in normal caps. However, I want small cpas acronyms in the body text. I use glossaries package as the follwoing example. Would you please help? ...
2
votes
1answer
311 views

Why does first use of \gls look different than \glsfirst?

I customized the layout of acronyms which works well for \gls. Surprisingly it does not work when using \glsfirst. \documentclass{scrartcl} \usepackage[ acronym, ]{glossaries} ...
5
votes
1answer
464 views

Toptesi class and sequential page numbering

I'm working on a final dissertation and I've been using the toptesi class provided by our university. The problem is that I wanted to manually add the glossaries package. Now, whilst I managed to ...
3
votes
1answer
255 views

\makeglossaries conflict with indexing

This is my first post to ask for help since I cannot find any solution. I use MacTex. I am using glossaries pkg to generate list of acronyms, symbols and glossary of terms. I want to include also an ...
5
votes
1answer
329 views

How to mark up different entry types (index/glossary/acronym/notation) at the same time in datagidx package?

I came across datagidx package, which is part of the datatool bundle, the killing feature of this package is that you can use it independently, not relying on external indexing applications, e.g., ...
1
vote
0answers
181 views

How can I display a list of acronyms and a separate list of symbols in the same document? [closed]

I want to display both list of acronyms and list of symbols in my thesis.. I tried all, from the solutions I found here... but it is always showing "acro.sty not found" and some other error with ...